keepcalculator

06 Numbers and Powers

A1 vs A2 SD Card: Speed Classes Explained

Card No. 06·81157 · Updated · Standard formula, shown below

The A1 and A2 ratings are Application Performance Classes for SD cards, defining minimum random read/write speeds for running apps directly from the card. A2 cards are roughly twice as fast as A1 in random access, making them better for smartphones, tablets, and handheld gaming consoles, while A1 cards are sufficient for most other uses and often cheaper.

What Are the A1 and A2 Ratings?

The SD Association introduced the Application Performance Class in 2016 to address the growing use of SD cards for storing and running mobile apps. Before this, speed ratings like Class 10 or UHS-I focused only on sequential read/write speeds—large, continuous data transfers like recording video or copying files. But apps behave differently: they constantly read and write many small files in random locations, which is far more demanding on a card’s controller and flash memory.

A1 and A2 specify minimum random performance under a defined test. A1 guarantees at least 1,500 random read IOPS (input/output operations per second) and 500 random write IOPS, plus a sequential write speed of at least 10 MB/s. A2 doubles those random requirements to 4,000 read IOPS and 2,000 write IOPS, with the same 10 MB/s sequential write floor. The sequential read speed isn’t part of the A-class spec; it’s covered by the card’s UHS or Video Speed Class.

How Random Speed Affects Real-World Use

When you launch an app, load a game level, or scroll through a photo gallery, the card must fetch many small pieces of data scattered across the memory. A card with high random read speeds can access those pieces faster, reducing loading times and stutter. Random writes matter when the app saves progress, caches data, or writes logs.

For example, a navigation app constantly reads map tiles and writes recent searches. A2 cards can cut the wait time noticeably compared to A1. In contrast, copying a 4 GB movie file is a sequential operation—both A1 and A2 cards with the same UHS rating will perform nearly identically, because the sequential speed rating dominates that task.

A1 vs A2: Key Differences

  • Minimum random read: A1 = 1,500 IOPS, A2 = 4,000 IOPS (2.7x higher)
  • Minimum random write: A1 = 500 IOPS, A2 = 2,000 IOPS (4x higher)
  • Minimum sequential write: Both = 10 MB/s
  • Typical use cases: A1 for general storage, photos, and older devices; A2 for app-heavy phones, tablets, and gaming handhelds
  • Price: A2 cards usually cost slightly more than A1 equivalents from the same brand and capacity

The real-world gap between A1 and A2 depends on the device. A smartphone with a fast internal bus can take full advantage of A2’s random speeds, while an older device with a slower card reader might not show any difference. The card’s controller and the device’s firmware also play a role—an A2 card in a device not optimized for it may perform like an A1 card.

How to Choose Between A1 and A2

Match the card to your primary use:

  • For a smartphone or tablet that supports adoptable storage (apps installed on the card): Choose A2. The higher random speeds reduce app launch times and improve multitasking.
  • For a Nintendo Switch, Steam Deck, or other gaming handheld: A2 is recommended, especially for large open-world games that stream assets from storage. Many game developers now list A2 as a requirement.
  • For a camera (mirrorless, DSLR, drone): A1 is usually sufficient because cameras write large sequential files. Focus on the UHS Speed Class (U3 or V30) instead of A-class.
  • For a Raspberry Pi or other SBC running an OS from the card: A2 helps with boot time and package updates, but the Pi’s card reader may limit the benefit. A1 is a safe budget choice.
  • For a dashcam or security camera: A1 is fine; these devices need sustained sequential writes, not random access.

If you’re unsure, check the device’s manual or the manufacturer’s website for the recommended card class. Many devices explicitly state “A2 recommended” or “A1 minimum.”

Common Misconceptions and Pitfalls

One common mistake is assuming A2 is always faster than A1 in every scenario. The A-class only sets minimums; a high-quality A1 card from a reputable brand can outperform a cheap A2 card in real-world tests, especially if the A2 card uses weaker flash memory or a less efficient controller. The rating is a floor, not a guarantee of peak performance.

Another pitfall is ignoring the UHS Speed Class. A card can be A2 but only U1 (10 MB/s sequential write), which would be poor for 4K video recording. Always check both the A-class and the UHS/V class when buying for a camera. Conversely, a card with a high UHS class (U3, V30) but no A-class may still be fine for apps if its random speeds are high, but you can’t verify that without the A rating.

Also note that the A-class applies only to SD cards, not microSD cards? Actually, it applies to both SD and microSD formats. The rating is printed on the card or its packaging as a small “A1” or “A2” symbol. Some counterfeit cards fake these logos, so buy from reputable sources and test the card with a tool like h2testw (Windows) or F3 (macOS/Linux) to verify actual speeds.

Compatibility and Device Support

All devices that support SD or microSD cards can read A1 and A2 cards—the A-class is backward compatible. However, the device must be designed to handle the higher random speeds to see a benefit. Most modern smartphones, tablets, and handheld consoles released after 2018 support A2. Older devices may still work, but they’ll treat the card as a standard Class 10 card, and you won’t get the A2 performance boost.

If you’re using an SD card in a laptop via a card reader, the reader’s speed also matters. A cheap USB 2.0 reader will bottleneck any card to about 20 MB/s, negating A2 advantages. For best results, use a USB 3.0 or higher reader.

Cost and Value

Price differences between A1 and A2 cards are usually small—often 10–20% for the same capacity. For example, a 128 GB A1 card might cost $15, while an A2 version costs $18. The price gap narrows at higher capacities. If the price difference is minimal, choosing A2 is a safe future-proofing move, especially if you plan to use the card in a newer device later. If you’re on a strict budget and only need storage for photos or music, A1 is perfectly adequate.

Frequently Asked Questions

Can I use an A2 card in a device that only supports A1?

Yes, A2 cards are backward compatible. The device will read and write to the card, but it may not achieve A2 speeds if the device’s card controller doesn’t support the higher random access mode. The card will simply operate at lower speeds, similar to an A1 card.

Do I need A2 for 4K video recording?

No. 4K video requires high sequential write speeds, which are determined by the UHS Speed Class (U3) or Video Speed Class (V30 or higher). A2 is about random performance, not sequential. A card with U3 and A1 will record 4K perfectly fine.

Is A2 worth it for a Nintendo Switch?

Yes, especially for digital games. The Switch’s card slot supports A2, and games like The Legend of Zelda: Breath of the Wild load faster from an A2 card compared to an A1. The difference is noticeable but not dramatic—loading times may drop by a few seconds.

What does IOPS mean?

IOPS stands for Input/Output Operations Per Second, a measure of how many read or write operations a storage device can perform in one second. Higher IOPS means faster random access, which is crucial for apps that read and write many small files.

Can I upgrade from A1 to A2 by formatting?

No, the A-class is a hardware specification. Formatting only changes the file system (like exFAT or FAT32), not the card’s physical performance. The card’s controller and flash memory determine its speed class.

Are A2 cards more reliable than A1?

Not necessarily. Reliability depends on the brand, flash memory quality, and manufacturing, not the speed class. An A2 card from a reputable brand is likely reliable, but a cheap A1 card from an unknown brand could be less dependable. Always buy from trusted manufacturers and check reviews.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →