Amazfit Bip Notification Sync: How It Works

Amazfit Bip notification sync lets your watch show incoming calls, texts, and app alerts from your phone. You set it up in the Zepp (formerly Mi Fit) app, and the watch mirrors whatever notifications you allow. This article explains the setup, why sync sometimes fails, and how to fix it.

How Notification Sync Works

The Amazfit Bip does not receive notifications directly from your phone’s system. Instead, the Zepp app runs in the background, reads the notifications that your phone receives, and forwards them to the watch over Bluetooth. The watch then vibrates and displays the alert on its screen. This means the app must be running and have permission to access your notifications. If the app is closed or its permissions are revoked, sync stops.

Setting Up Notifications on Android

Open the Zepp app on your phone and make sure your Bip is connected.
Go to Profile → your device (e.g., “Amazfit Bip”) → Notifications.
Enable Incoming calls and App notifications.
Tap App notifications and select which apps you want alerts from (e.g., WhatsApp, Gmail, Messenger).
On your phone, go to Settings → Apps → Zepp → Permissions and enable Notification access. This is often under “Special access” or “Notification access” in Android settings.
Also ensure that battery optimization is disabled for Zepp, so it can run in the background.

Setting Up Notifications on iPhone

Open the Zepp app and connect your Bip.
Go to Profile → your device → Notifications.
Enable Incoming calls and App notifications.
On your iPhone, go to Settings → Notifications → Zepp and ensure that “Allow Notifications” is on, and that alerts are set to “Lock Screen” or “Notification Center.”
For calls to sync, the watch must be connected to the phone via Bluetooth (not just the app).

Common Problems and Fixes

If notifications stop appearing, try these in order:

Restart Bluetooth: Turn Bluetooth off and on again on your phone, then reconnect the watch in the app.
Re-enable notification access: On Android, go to Settings → Apps → Zepp → Notifications → toggle it off and on again.
Check battery saver: On both platforms, battery-saving modes can kill the Zepp app. Add Zepp to “Unrestricted” or “Not optimized” battery settings.
Re-pair the watch: In the Zepp app, remove the device and pair it again. This often resets the notification channel.
Update the app and watch firmware: Go to the app’s “Check for updates” and the watch’s “Firmware update” in settings.

Why Notifications Stop Syncing

The most common reason is that the Zepp app is not running in the background. On Android, aggressive battery optimization (from manufacturers like Xiaomi, Samsung, or Huawei) can kill the app. On iPhone, if you swipe the app away from the app switcher, it may not receive notifications. Another cause is that you’ve reached the watch’s notification limit—the Bip stores a limited number of alerts (usually around 10–20). Once full, older ones are replaced, but new ones should still appear. If the watch is out of Bluetooth range (about 10 meters), sync pauses until you’re back in range.

What Notifications Can You Get?

Calls: Incoming call alerts with caller ID (if your phone’s contacts are synced).
SMS: Text message previews.
App alerts: Any app that sends notifications—WhatsApp, Telegram, Facebook, email, calendar, etc. You can enable or disable each app individually.

The watch does not support replying to notifications—it only displays them. It also does not show images or rich content; only text.

Frequently Asked Questions

Why do I only get call notifications and not app notifications?

On Android, app notifications require “Notification access” permission. Go to Settings → Apps → Zepp → Notifications → enable “Notification access.” On iPhone, make sure the specific app’s notifications are allowed in iOS settings and that Zepp has “App notifications” enabled in the watch’s settings. Also, check that the app you want is toggled on in the Zepp app’s notification list.

Can I get notifications when the phone is locked?

Yes, the watch receives notifications from the phone’s notification shade, which works even when the phone is locked. However, on Android, the Zepp app must be running in the background. On iPhone, the watch receives notifications from the iOS notification center, which also works when locked.

How do I stop the watch from showing notifications at night?

You can enable “Do Not Disturb” mode on the watch (swipe down from the watch face and tap the moon icon). This silences all notifications and vibrations until the set time. You can also schedule DND in the Zepp app under Device settings.

Why do notifications appear but the watch doesn’t vibrate?

Check the watch’s vibration setting. On the watch, go to Settings → Vibration and make sure it’s not set to “Off.” Also, check if “Do Not Disturb” is enabled. On Android, ensure that the Zepp app has vibration permission enabled in the system settings.

Does the Bip support notification sync with multiple phones?

No, the watch can only be paired with one phone at a time. If you switch phones, you must unpair from the old phone and pair with the new one via the Zepp app.

Alternatives and Limitations

The Amazfit Bip is an older model, and its notification sync is basic compared to newer smartwatches. It cannot display emoji or images, and it truncates long messages. If you need more advanced notification features (like quick replies), you might consider a newer Amazfit model or a Wear OS watch. However, for simple alerts, the Bip works well once set up correctly.

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →