Anker 727 Charging Station: Ports, Power and Setup

The Anker 727 Charging Station is a compact desktop power strip with two AC outlets and four USB ports for charging and powering several devices from one wall socket. It is useful for a desk or bedside table, but its total output is shared across connected devices, so it is not equivalent to a high-power laptop dock or a surge protector unless the specific model’s documentation confirms that feature.

What the Anker 727 is

Sold as the Anker 727 Charging Station, also known as the Power Strip (GaNPrime 100W), the unit combines conventional AC outlets with USB charging. The GaNPrime name refers to Anker’s charging-product range; it does not mean the station supplies 100 watts to every port at once. The headline 100W figure is the maximum USB-C charging output under supported conditions, not the capacity of the AC outlets or the total rating of every output combined.

It is designed to sit on a work surface rather than function as a long extension cord. Its angled, upright form keeps outlets and ports accessible, which can be handy when bulky plugs would otherwise crowd a compact wall adapter. Check the product listing and label before buying: availability, included cable, regional plug, and specifications can differ between versions or markets.

Ports and charging power

The commonly listed 727 model has two AC outlets, two USB-C ports, and two USB-A ports. USB-C is the best choice for a compatible modern phone, tablet, or laptop because it supports USB Power Delivery (PD). USB-A remains useful for older cables and accessories, but it does not provide the same USB-C PD capability.

The maximum 100W USB-C figure applies when a single compatible device is connected to the appropriate USB-C port and the device and cable support the necessary charging mode. When multiple USB devices are connected, the station allocates its available USB power among them. The amount each receives depends on which ports are used and the device’s charging requirements; do not assume both USB-C ports can each deliver 100W simultaneously.

AC outlets are separate from the USB charging outputs: they provide mains power to devices such as a monitor or lamp, within the station’s rated limits. Their use does not turn the USB-C ports into a way to power an appliance, and the station should not be treated as a battery or portable power bank. It needs a wall outlet.

How to set it up

Place the station on a stable, dry surface with space around it for ventilation. Keep it away from water, heat sources, and places where it could be covered by fabric or papers.
Connect its AC plug directly to a suitable wall receptacle. Check the rating printed on the unit and follow the instructions for your country and electrical system.
Plug AC-powered equipment into the two AC outlets, staying within the marked limits. Connect USB devices with suitable cables to the USB-C or USB-A ports.
For a laptop or other high-demand device, use a USB-C cable rated for the required power and check the device’s charging specification. A low-rated cable or an incompatible charging protocol can result in slower charging.
If a device charges slowly, disconnect other USB devices and try it alone on a USB-C port. This helps identify whether shared output or cable compatibility is the cause.

Choosing it for a desk

The 727 makes most sense when you want several charging ports and a couple of AC outlets in one reachable desktop unit. For example, a desk setup might use an AC outlet for a monitor and the other for a lamp, while USB ports charge a phone, earbuds, and a tablet. A laptop may also charge over USB-C if its power needs fit the station’s supported output.

Count your connections. Two AC outlets and four USB ports can reduce adapter clutter, but they may not cover a setup with several mains-powered devices.
Check laptop requirements. Look up the laptop’s recommended USB-C charging wattage. A machine designed for more power may charge slowly, maintain its battery level, or continue discharging while in use.
Consider placement. The station is for a nearby surface, not a substitute for a long extension lead. Confirm that its cord and outlet arrangement suit your desk.
Check electrical ratings. Add up the requirements of devices using the AC outlets and observe the limits printed on the station. Do not exceed its ratings or connect another power strip unless the instructions explicitly allow it.

Common issues and misconceptions

“My laptop does not get 100W.” The advertised maximum is not guaranteed for every device or every port combination. The laptop, USB-C port, and cable must all support the required charging standard and power level; connecting additional USB devices may also change available output.

“The USB port is not charging.” Try a known-compatible cable and a different USB port, then test the device with its original charger. Inspect for debris or damage, and avoid forcing a connector. If the station or cable is unusually hot, damaged, or behaving erratically, unplug it and stop using it until the cause is resolved.

“Can I plug in a high-wattage appliance?” Do not assume that because an appliance’s plug fits, it is suitable. Check the station’s AC rating and the appliance’s power demand. High-draw devices such as heaters or kettles can exceed the limits of desktop power stations and should only be connected when the manufacturer’s instructions and ratings permit it.

Also, “charging station” does not automatically mean “surge protector.” If surge protection, overload protection, or another specific safeguard matters to you, verify that it is explicitly stated in the documentation for the exact model and regional version. Do not rely on appearance or the product name.

How it compares with alternatives

A basic power strip usually prioritizes multiple AC sockets, sometimes with a longer cord; the 727 instead emphasizes a mix of two AC outlets and built-in USB charging on a compact desk unit. A multi-port USB charger may offer more USB connections or a different power allocation, but it cannot replace AC outlets. A laptop dock typically adds data connections such as display or network ports; the 727 is a power accessory, not a USB-C hub or docking station.

Choose a simpler USB charger if you only need to charge phones and tablets. Choose a conventional power strip if you primarily need more AC outlets or a longer reach. Consider a dock if your goal is to connect a laptop to monitors and peripherals. Always compare the exact port layout, output distribution, cable length, electrical ratings, and safety features rather than relying on broad product labels.

Frequently Asked Questions

How many devices can the Anker 727 charge at once?
The commonly listed version has two AC outlets and four USB ports, so it can connect up to six devices. Whether all can operate together depends on their power needs and the station’s ratings; USB output is shared.

Can the Anker 727 charge a laptop?
Yes, a laptop that supports USB-C charging may charge from a USB-C port. Check the laptop’s required wattage and use a compatible cable; a higher-powered laptop may charge more slowly than it does with its dedicated adapter.

Does it deliver 100W from both USB-C ports?
No. The 100W figure is a maximum USB-C output under supported conditions, not a promise of 100W per port at the same time. Consult the model’s port-output table for the allocation when several devices are connected.

Is the Anker 727 a surge protector?
Do not assume so from the name. Check the specification sheet and label for the exact model to confirm whether surge protection is included and what its limits are.

Can I use the Anker 727 while traveling?
It is a mains-powered desktop station, not a battery-powered travel charger. Confirm the input-voltage range, plug type, and local electrical requirements before using a regional version abroad; a plug adapter does not change voltage.

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →