To set per-level stat multipliers in Ark: Survival Evolved, you edit the Game.ini file and add lines under the [/Script/ShooterGame.ShooterGameMode] section, using the format PerLevelStatsMultiplier_Player[StatIndex]=Value or PerLevelStatsMultiplier_DinoTamed[StatIndex]=Value. For example, PerLevelStatsMultiplier_Player[0]=0.1 makes health increase by 10% of the default amount per level. This article explains the exact syntax, which stat index corresponds to which attribute, and how to apply the changes safely.
Formula
The formula for the new stat value after leveling is:
New Value = Base Value × (1 + (Multiplier × Levels Gained))
Where:
- Base Value – the stat value before leveling (e.g., 100 health).
- Multiplier – the per-level multiplier you set in Game.ini (e.g., 0.1 means +10% of base per level).
- Levels Gained – the number of levels you put into that stat.
This is a simplified model; the actual game uses a more complex curve, but it gives you a quick estimate.
Worked Example
Using the default values from the calculator above:
- Base Health = 100
- Multiplier = 0.1 (10%)
- Levels Gained = 10
- New Health = 100 × (1 + 0.1 × 10) = 100 × 2 = 200
So after 10 levels, your health would be 200, double the base.
What Are Per-Level Stat Multipliers?
In Ark, every time a player or a tamed creature gains a level, they receive a certain number of stat points (usually 1 for players, and a random amount for dinos). Each point increases a specific stat by a fixed percentage of the base value. These percentages are controlled by the per-level multipliers. By default, most stats increase by about 2-3% per level for players, and 5-7% for tamed dinos, but you can change these values to make the game easier, harder, or just more to your liking.
How to Edit Game.ini
Here are the exact steps to change the multipliers:
- Locate your Game.ini file. For single-player, it’s in
ShooterGame/Saved/Config/WindowsNoEditor/Game.ini. For a dedicated server, it’s in the server’sShooterGame/Saved/Config/LinuxServer/Game.ini(or WindowsServer). - Open the file with a text editor like Notepad or VS Code.
- Find or create the section
[/Script/ShooterGame.ShooterGameMode]at the top of the file. - Add lines for each stat you want to change. Use the format
PerLevelStatsMultiplier_Player[Index]=Valuefor players,PerLevelStatsMultiplier_DinoTamed[Index]=Valuefor tamed dinos, andPerLevelStatsMultiplier_DinoWild[Index]=Valuefor wild dinos. - Save the file and restart the game/server.
Stat Index Numbers
Each stat has a number (index) that you must use in the brackets. Here is the full list:
- 0 – Health
- 1 – Stamina
- 2 – Torpor (usually not changed)
- 3 – Oxygen
- 4 – Food
- 5 – Water
- 6 – Temperature (usually not changed)
- 7 – Weight
- 8 – Melee Damage
- 9 – Movement Speed
- 10 – Fortitude (players only)
- 11 – Crafting Speed (players only)
For example, to make players gain 5% more health per level, you would add: PerLevelStatsMultiplier_Player[0]=0.05.
Choosing the Right Multiplier Values
The default values are roughly 0.02 (2%) for most player stats, and 0.05-0.07 for tamed dinos. If you want a more casual experience, you might set health and melee to 0.05 or 0.1. If you want a brutal survival challenge, you could set them to 0.01 or even 0. Here are some common configurations:
- Vanilla-ish: 0.02 for players, 0.05 for tamed dinos.
- Easy / boosted: 0.05 for players, 0.1 for tamed dinos.
- Hardcore: 0.01 for players, 0.02 for tamed dinos.
Remember that these multipliers affect only the increase per level, not the base value. The base value is determined by the creature’s species and its wild level.
Common Mistakes and Troubleshooting
Here are the most frequent issues players run into:
- Wrong section: The lines must be under
[/Script/ShooterGame.ShooterGameMode], not under[/Script/Engine.GameSession]or any other section. - Wrong file: You must edit
Game.ini, notGameUserSettings.ini. - Typos: The exact spelling matters.
PerLevelStatsMultiplier_Player[0]=0.1is correct;PerLevelStatsMultiplier_Player[0] = 0.1(with spaces) may not work. - Not restarting: Changes only take effect after a full restart of the game or server.
- Existing saves: The multiplier only applies to new levels gained after the change. Creatures already leveled will keep their old stats.
Frequently Asked Questions
Do these multipliers affect wild dinos?
Yes, you can use PerLevelStatsMultiplier_DinoWild[Index]=Value to change how wild dinos scale. However, this is rarely recommended because it can make wild creatures extremely powerful or weak, breaking the game balance.
Can I set a multiplier to 0 to disable a stat?
Yes, setting a multiplier to 0 means that stat will not increase when you level up. This is useful for removing stats you don’t want, like Oxygen or Food on a server where they’re irrelevant.
Is there a way to make stats increase by a flat number instead of a percentage?
No, the per-level multipliers are always percentage-based. There is no built-in way to add a flat amount per level. You would need a mod for that.
Why didn’t my change work?
Check the section header, the exact syntax, and make sure you restarted. Also, if you’re on a server, the server owner must make the change; client-side changes don’t affect dedicated servers.
What is the maximum multiplier I can set?
There is no hard cap, but extremely high values (like 100) can cause overflow or make the game unplayable. It’s best to stay below 1.0 (100%) to avoid weird behavior.
Can I use decimals like 0.05?
Yes, decimals are perfectly fine. 0.05 means a 5% increase per level.
Related
Formula used
in t | Current Stat Value | - | 100 | 0 in p | Multiplier (e.g., 0.1 = 10%) | - | 0.1 | 0 in l | Levels Gained | - | 10 | 0 out new | New Stat Value | - | t * (1 + p * l) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Skip Ryobi and Milwaukee? Harbor Freight Tools to Buy
- Funny Subreddits That Make You Laugh
- Why Retro Gaming Is Still Worth Playing Today
- Neptune Facts That Will Blow Your Mind
- Survival Crafting Game Fatigue: Why & How to Fix It
- Sell Your EV Now Before Prices Plummet?