keepcalculator

06 Numbers and Powers

Backup WD My Cloud NAS to Cloud: Full Guide

Card No. 06·70770 · Updated · Standard formula, shown below

Yes, you can back up a WD My Cloud NAS to a cloud service, and the most reliable method is to use the NAS’s built-in Cloud Backup feature to sync specific folders to a supported provider like Backblaze B2, Amazon S3, or Microsoft Azure. You configure this from the WD My Cloud dashboard, and the NAS handles the upload directly, so your computer doesn’t need to stay on. This guide explains the options, the setup steps, and the common pitfalls to avoid.

Why Back Up a NAS to the Cloud

A NAS protects against a single drive failing, but it does not protect against fire, theft, or a ransomware attack that encrypts every drive in the unit. Offsite cloud backup creates a second copy in a different physical location. The 3-2-1 backup rule is the standard: keep three copies of your data, on two different media, with one copy offsite. Cloud backup fulfills that third copy without you having to maintain a second physical location.

WD My Cloud devices run a Linux-based operating system with a web dashboard. They include a built-in “Cloud Backup” app that can push files to several cloud storage providers. This is different from simply mounting the NAS as a network drive and using a desktop backup program—the built-in method runs independently of any computer.

What WD My Cloud Models Support Cloud Backup

The Cloud Backup feature is available on most current My Cloud models, including the My Cloud, My Cloud Home, My Cloud Home Duo, and My Cloud EX series. However, the exact interface and supported providers differ slightly between the classic My Cloud OS 5 and the My Cloud Home OS. If you have an older model that does not have the Cloud Backup app, you can still use a third-party tool like rclone or a desktop backup program that can read the NAS as a network share.

For My Cloud OS 5 devices, the dashboard includes an app called “Cloud Backup.” For My Cloud Home devices, the backup settings are under the “Settings” menu, and the options are more consumer-focused, often limited to a few providers. Check your specific model’s manual to confirm which providers are listed.

How the Built-in Cloud Backup Works

The built-in Cloud Backup uses an agent that runs on the NAS. You select a source folder on the NAS and a destination bucket or container in the cloud provider. The NAS then uploads the files, and on subsequent runs, it only uploads changes—this is called incremental backup. You can schedule the backup to run daily, weekly, or continuously.

The process is straightforward:

  • Open the My Cloud dashboard in a browser.
  • Go to the “Cloud Backup” app (or “Backup” on My Cloud Home).
  • Choose the cloud provider you have an account with.
  • Enter your access keys or sign in to the provider.
  • Select the local folder on the NAS to back up.
  • Select the destination bucket or container.
  • Set a schedule (e.g., daily at 2 AM).
  • Start the backup and monitor the progress.

Note that the NAS must have enough free space to stage the backup if the provider requires it, and the upload speed is limited by your internet connection’s upload bandwidth.

Choosing a Cloud Provider

Not all cloud storage is equal for NAS backup. You want a provider that supports the S3 API or a protocol that WD’s Cloud Backup supports natively. Common options include:

  • Backblaze B2 – Low cost, S3-compatible, and often listed directly in WD’s Cloud Backup app.
  • Amazon S3 – Widely supported, but costs can be higher for large amounts of data.
  • Microsoft Azure Blob – Another enterprise option, sometimes preferred by businesses.
  • Google Cloud Storage – Available on some models, but not all.

If your provider is not listed, you can use an S3-compatible gateway or a desktop program like CloudBerry (now MSP360) that runs on a computer and can copy from the NAS to any cloud. Another option is to use rclone, a command-line tool that can run on the NAS itself if you can install it via SSH, but that requires more technical knowledge.

Consider the cost of egress (downloading) if you ever need to restore. Some providers charge a fee for downloading your data, which can be a surprise. Backblaze B2, for example, has a free egress allowance up to 3x your storage per month, which is generous for personal use.

Common Problems and How to Avoid Them

Even with the built-in tool, several issues can arise:

  • Slow uploads – The NAS is not a high-performance server, and if you have many small files, the backup can be very slow. Consider zipping folders of small files before backing them up.
  • Incomplete backups – If the NAS loses power or network during a backup, it may not resume correctly. Check the backup logs regularly.
  • Provider credentials expiring – Some cloud providers require you to refresh access keys periodically. If the backup fails with an authentication error, update the keys in the WD dashboard.
  • File name limits – Some cloud providers have restrictions on file name lengths or characters. If you have files that fail, rename them or exclude them.

To avoid these, set up email notifications for backup failures, and test a restore periodically. A backup that you cannot restore is not a backup.

Alternative Methods: Desktop Software and rclone

If the built-in Cloud Backup is not available or does not meet your needs, you have alternatives:

  1. Desktop backup software – Programs like Arq, Duplicati, or MSP360 can be installed on a computer that can access the NAS as a network drive. They will read the NAS folders and upload to any cloud provider. The computer must be on during the backup window.
  2. rclone – A command-line tool that can run on a PC, a Raspberry Pi, or directly on the NAS if you have SSH access. It supports dozens of cloud providers and is scriptable. This is the most flexible but also the most technical.
  3. Sync to another NAS – If you have a second NAS at a different location, you can use rsync or WD’s own replication features to copy data between them. This is not cloud, but it is offsite.

Each method has trade-offs in cost, complexity, and reliability. The built-in Cloud Backup is the easiest for most users.

Cost and Storage Considerations

Cloud storage is not free beyond a small free tier. You pay for the amount of data stored, and sometimes for API requests and egress. For a 4 TB NAS, you might store 2 TB of actual data. At typical rates of $5–$6 per TB per month, that is about $10–$12 per month. Some providers offer lower costs for infrequent access storage, but that may incur fees when you restore.

Before you start, estimate your data size and set a budget. Also consider that the NAS itself needs to have enough free space for any temporary files during backup, and your internet plan should have a reasonable upload speed. For a large initial backup, you might want to do a local seed (e.g., using a USB drive) if the provider supports it, but WD’s built-in tool does not offer that easily.

Frequently Asked Questions

Can I back up my entire WD My Cloud to Google Drive?

It depends on your model. Some My Cloud OS 5 devices list Google Drive as a destination in the Cloud Backup app, but My Cloud Home models do not. If Google Drive is not listed, you can use a desktop program like rclone or Arq to copy the NAS folders to Google Drive, but the NAS itself will not do it natively.

Is the WD My Cloud Cloud Backup encrypted?

When the NAS uploads to a cloud provider, the connection is encrypted in transit (HTTPS/SSL). However, the files themselves are not encrypted before upload unless you enable encryption in the provider or use a third-party tool that encrypts client-side. For sensitive data, consider using a tool like Duplicati that encrypts before sending.

What happens if my NAS dies while the backup is running?

The partial files that were already uploaded remain in the cloud, but the backup session will not complete. After the NAS is replaced or repaired, you will need to run the backup again. The cloud provider may have incomplete files that you should clean up manually.

How long does the first backup take?

It depends on the amount of data and your upload speed. For example, 1 TB at 10 Mbps upload would take about 10 days continuously. You can estimate with this formula: time (days) = (data in GB * 8) / (upload speed in Mbps) / 86400. Most people do the initial backup over a few weeks.

Can I restore from the cloud to a new WD My Cloud?

Yes. The Cloud Backup app also allows you to download files from the cloud back to the NAS. You can select a folder and restore it. For large restores, it may be faster to request a physical drive from some providers, but WD’s built-in tool does not support that directly.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →