keepcalculator

06 Numbers and Powers

Best HDMI Switchers with 4K Support

Card No. 06·74175 · Updated · Standard formula, shown below

The top pick for most people is the Kinivo 550BN – it handles 4K@60Hz, HDR, and HDCP 2.2 on all three inputs, comes with a remote and IR extender, and costs under $50. It simply works with modern consoles, streaming boxes, and Apple TV without the handshake headaches that plague cheaper switches.

What to Look For

Not all “4K” HDMI switchers are equal. The specs that actually matter:

  • HDCP 2.2/2.3 support – without this, Netflix, Disney+, and 4K Blu-ray players will refuse to output 4K or HDR. Check the product page explicitly.
  • Bandwidth (18Gbps vs 48Gbps) – 18Gbps (HDMI 2.0) handles 4K@60Hz with HDR10. 48Gbps (HDMI 2.1) adds 4K@120Hz and 8K, but only matters if you have a PS5/Xbox Series X and a 120Hz TV.
  • Power supply – passive switches (no power) often drop signal or fail to switch automatically. Always choose a powered switch.
  • Remote or auto-switching – IR remotes are standard; auto-switching (detects the newest active input) is convenient but can be flaky. Look for a manual override button.
  • Number of inputs – 3 or 4 is typical. More inputs usually cost more and may introduce more switching lag.
  • EDID handling – cheap switches sometimes pass wrong display info, causing black screens. Look for switches with “EDID emulation” or firmware updates.

Kinivo 550BN (Best Overall)

Strengths: 3 HDMI 2.0 inputs, 4K@60Hz, HDR10, Dolby Vision passthrough, HDCP 2.2, IR remote + front panel buttons, auto-switching that actually works, and a 12-month warranty. It’s the most reliable budget switch we’ve seen in terms of handshake reliability.

Trade-offs: No HDMI 2.1 (so no 4K@120Hz), and the remote is basic. Also, it’s not ideal if you have more than 3 devices.

Who it suits: Most living rooms with a 4K TV, a streaming stick, a game console, and a cable box. If you want a set-and-forget switch under $50, this is it.

ROOFULL 4K 60Hz 5×1 (Most Inputs for the Price)

Strengths: Five HDMI inputs, all supporting 4K@60Hz, HDR, and HDCP 2.2. Includes IR remote, manual button, and auto-switching. Costs about $35–$40, which is remarkable for five ports.

Trade-offs: Build quality is plasticky, and some users report occasional EDID issues with certain TVs (usually fixed by power cycling). No 4K@120Hz support.

Who it suits: People with many legacy devices (Roku, Fire Stick, older console, DVD player, PC) who need one switch to rule them all on a tight budget.

Zettaguard 4K 60Hz 4×1 (Best Value with Remote)

Strengths: Four inputs, 4K@60Hz, HDR10, HDCP 2.2, and includes both IR remote and a small IR receiver cable. Auto-switching is reliable, and it supports Dolby Vision. Often under $30.

Trade-offs: No HDMI 2.1, and the remote requires line-of-sight (the IR receiver helps). Some units have a slightly loose HDMI port.

Who it suits: Budget-conscious buyers who need 4 inputs and want a working remote without paying a premium.

AV Access 4K 4×1 (Best for EDID Control)

Strengths: Features EDID emulation (you can set it to copy the TV’s EDID or use a default), which solves many black-screen problems. Supports 4K@60Hz, HDR, and HDCP 2.2. Has a small OLED display showing the active input.

Trade-offs: Pricier (around $60–$70), and the OLED display is a bit gimmicky. No HDMI 2.1.

Who it suits: Tech-savvy users who’ve had handshake issues with other switches, or who connect to a projector or AV receiver with finicky EDID.

CYP 4K 4×1 (Best for Professional/AV Installations)

Strengths: Rack-mountable, metal chassis, supports 4K@60Hz 4:4:4, HDCP 2.2, and has serial (RS-232) control for automation systems. Very reliable in commercial setups.

Trade-offs: Expensive (often $150+), no remote included (you need to buy one or use serial), and overkill for most homes.

Who it suits: Home theater installers, conference rooms, or anyone integrating with a control system.

HDMI 2.1 Switch (e.g., Zeskit 8K 2×1 or 3×1) – For Next-Gen Consoles

Strengths: Supports 48Gbps bandwidth, 4K@120Hz, 8K@60Hz, VRR, ALLM, and eARC. If you have a PS5 or Xbox Series X and a 120Hz TV, this is the only way to get full features.

Trade-offs: Much more expensive (usually $80–$150 for 2–3 inputs), and some models have compatibility quirks with certain TVs. Also, 8K is still not mainstream.

Who it suits: Gamers with high-refresh-rate displays who absolutely need 4K@120Hz and VRR.

How to Choose

Budget: Under $40 – stick with Kinivo, ROOFULL, or Zettaguard. They all handle 4K@60Hz HDR. Over $60 – you’re paying for EDID control, build quality, or HDMI 2.1 features.

Use case: If you only have 3 devices and want zero fuss, Kinivo 550BN is the sweet spot. If you have 5 devices, ROOFULL is the cheapest way. If you have a 120Hz gaming setup, you must spend more on an HDMI 2.1 switch – no way around it.

Common trade-offs: More inputs often mean more switching lag or EDID issues. Auto-switching is convenient but can misbehave when you turn off one device and it “steals” the signal. IR remotes are fine, but if your equipment is hidden in a cabinet, get a switch with an IR receiver cable (Zettaguard has one).

Also consider: Do you need audio extraction (e.g., optical out)? That adds cost and complexity. Do you need 4K@60Hz 4:4:4 chroma? Most budget switches only support 4:2:0 at 4K@60Hz, which is fine for video but less ideal for PC text. Check the spec sheet.

Frequently Asked Questions

Will a 4K switch work with my older 1080p TV?

Yes, it will output 1080p if that’s what the TV supports. The switch passes through the resolution the TV reports via EDID.

Why does my screen go black for a few seconds when switching?

That’s normal – the TV and source renegotiate HDCP handshake. It can take 2–5 seconds. If it happens frequently, try a powered switch with EDID emulation.

Do I need an HDMI 2.1 switch for 4K@60Hz?

No. HDMI 2.0 (18Gbps) is enough for 4K@60Hz with HDR10. HDMI 2.1 is only needed for 4K@120Hz or 8K.

Can I use a switch with a soundbar?

Yes, but you need to connect the switch to the TV’s HDMI ARC/eARC port, then the soundbar to the TV’s eARC port. Or use a switch with audio extraction if your soundbar lacks HDMI.

Why does my switch not auto-switch when I turn on a device?

Auto-switching relies on the device sending a hot-plug signal. Some devices (like Apple TV) don’t always do that. Use the remote or manual button instead.

Will a switch degrade picture quality?

No, if it’s a powered switch that supports the full bandwidth. Cheap passive switches can cause sparkles or dropouts, but a quality powered switch passes the signal digitally without loss.

Bottom Line

For 95% of people, the Kinivo 550BN is the clear winner – it’s affordable, reliable, and handles all the 4K/HDR formats you actually use. If you need more than 3 inputs, get the ROOFULL 5×1. If you’re a gamer with a 120Hz TV, save up for a proper HDMI 2.1 switch. Avoid any unpowered switch – they cause more problems than they solve.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →