Yes, you can bring retro Mac startup chimes and system sounds back to modern OS X and macOS, and it takes only a few minutes using built-in tools or a free utility. This guide covers the classic sounds, where to find them, and two reliable ways to install them so your Mac sounds like 1991 again.
The Sounds People Miss
Classic Macintosh sounds fall into two groups: the startup chime and the system alert sounds. The startup chime played once during boot, while system sounds (like the “Simple Beep” or “Sosumi”) played for alerts, errors, and file operations. The most iconic is the 1984 Macintosh startup chord, a gentle four-note arpeggio. Later models used different chimes: the 1990s Macs had a longer, more melodic tone, and the 2000s Power Macs used a louder, more electronic beep. Modern Macs (2016 and later) play a startup sound only when booting into recovery or when the firmware is reset, so many users don’t hear any chime during normal startup.
Where to Get the Original Sound Files
Apple never officially released the classic sounds as downloadable files, but they exist in several places. The most reliable source is the System 7.5.3 and Mac OS 9 system files, which contain the alert sounds as .snd resources. You can extract them using a resource editor on an old Mac or a virtual machine. A simpler path: many retro Mac enthusiast sites host the extracted files in .aiff or .wav format. Search for “Macintosh startup chime download” or “Mac OS 9 system sounds.” Be cautious with random downloads—stick to well-known retro computing communities or archive.org, which hosts several Mac OS system images.
Method 1: Replace System Sounds with Built-in Tools (No Extra Software)
Modern macOS allows you to replace alert sounds by placing .aiff files in the system sound folder. Here’s how:
- Convert your retro sound file to
.aiffformat if it isn’t already (use the built-inafconvertcommand or any audio converter). - Open Finder, press
Cmd+Shift+G, and go to/System/Library/Sounds/. - Back up the original sound you want to replace (e.g.,
Glass.aiff) by copying it to your Desktop. - Rename your retro sound file to match the original name (e.g.,
Glass.aiff) and copy it into the folder. You’ll be prompted for your admin password. - Go to System Settings > Sound > Sound Effects and select the sound you just replaced (it will still show the original name, but play your file).
This works for alert sounds, but not for the startup chime, which is stored in firmware and not easily replaceable on modern Macs.
Method 2: Use a Free Utility for Full Control
For a more comprehensive solution, a free utility called Bong (by a developer named Adam) lets you set a custom startup chime on Macs that still have a startup sound. It works by intercepting the boot process and playing your chosen audio file. Alternatively, StartupSound is a command-line tool that can disable or replace the startup chime on Macs that have it. For alert sounds, you can use SoundSource (paid) or BackgroundMusic (free) to route system sounds to custom files, but the built-in method above is simpler for most users.
Why the Startup Chime Is Harder to Replace
On Intel Macs, the startup chime is stored in the EFI firmware, not in the operating system. That’s why you can’t just drop a file into a folder. On Apple Silicon Macs (M1 and later), the startup sound is also firmware-based, but it only plays during certain operations. Some utilities can patch the firmware, but that’s risky and not recommended for most users. The safest way to get a retro startup chime is to use a login item that plays the sound after you log in—it’s not the same as the boot chime, but it’s close.
Common Problems and Fixes
- Sound doesn’t play after replacement: Make sure the file is in
.aiffformat, mono or stereo, and less than a few seconds long. Also, check that the file permissions are correct (they should beroot:wheel). - System won’t let you copy to /System/Library/Sounds: On newer macOS versions, the system volume is read-only. You may need to disable System Integrity Protection (SIP) temporarily, which is not recommended for everyday use. A safer alternative is to use a utility that doesn’t require system file modification.
- The sound plays too quietly or too loudly: Adjust the volume in your audio editor before converting to AIFF. The system doesn’t apply any normalization.
- Startup chime doesn’t play at all on your Mac: If you have a 2016 or later MacBook Pro, the startup chime is disabled by default. You can re-enable it in Terminal with
sudo nvram StartupMute=%00(and mute it again with%01). This works on Intel Macs; Apple Silicon Macs don’t support this command.
Alternatives: Retro Sound Packs and Apps
If you don’t want to fiddle with system files, consider using a third-party app that plays retro sounds on demand. For example, Macintosh Sound Effects (a small app) plays classic sounds when you click its menu bar icon. You can also set individual app alerts to retro sounds—for example, in Mail, you can set a custom alert sound by placing an AIFF file in ~/Library/Sounds/ and selecting it in the app’s preferences. This is a non-invasive way to get the nostalgia without touching system folders.
Frequently Asked Questions
Can I get the original 1984 Mac startup chime on my M1 Mac?
Yes, but not as a true boot chime. You can play the audio file as a login item or use a utility that plays it after login. The firmware-level chime on Apple Silicon is not user-replaceable without unsupported firmware hacks.
Is it safe to replace system sound files?
Replacing alert sounds in /System/Library/Sounds is generally safe if you back up the originals. However, on macOS Catalina and later, the system volume is read-only, and modifying it requires disabling SIP, which weakens security. Using the ~/Library/Sounds folder for app-specific sounds is safer.
What format do the sound files need to be?
macOS system sounds must be AIFF (or CAF) format. You can convert MP3 or WAV files to AIFF using the built-in afconvert command in Terminal: afconvert input.mp3 output.aiff.
Why does my Mac not play any startup sound anymore?
Apple removed the startup chime on many Macs starting in 2016. On Intel Macs, you can re-enable it with the nvram command mentioned above. On Apple Silicon, there is no user-accessible setting.
Can I use the sounds on Windows or Linux?
Yes, the AIFF files work on any platform that supports AIFF. You can set them as system sounds in Windows (after converting to WAV) or in Linux desktop environments that accept custom sounds.
Are there any legal issues with downloading retro Mac sounds?
The sounds are copyrighted by Apple, but they are widely distributed for personal, non-commercial use. Downloading them for personal nostalgia is generally accepted, but redistributing them commercially would violate Apple’s copyright.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Skip Ryobi and Milwaukee? Harbor Freight Tools to Buy
- Funny Subreddits That Make You Laugh
- Why Retro Gaming Is Still Worth Playing Today
- Neptune Facts That Will Blow Your Mind
- Survival Crafting Game Fatigue: Why & How to Fix It
- Sell Your EV Now Before Prices Plummet?