Bypass FRP Lock Huawei: What Works

Bypassing the Factory Reset Protection (FRP) lock on a Huawei device is possible in several ways, but the method that works depends entirely on your device’s model, its Android version, and the build of EMUI or HarmonyOS it runs. The most reliable approaches involve using the built-in TalkBack accessibility feature to reach the Google account setup screen, using a special dialer code to open a hidden settings menu, or using a paid third-party unlocking tool that connects the phone to a PC.

What Is FRP and Why Does It Lock a Huawei?

Factory Reset Protection (FRP) was introduced by Google with Android 5.1 Lollipop. Its purpose is simple: if a phone is reset to factory settings without the owner’s permission, the device will ask for the Google account credentials that were previously synced on that phone. This prevents a thief from wiping the device and using it as new.

On Huawei devices, the situation is slightly more complex because Huawei lost access to Google Mobile Services (GMS) in 2019 due to US trade restrictions. This means newer Huawei models (those released after mid-2019) do not ship with Google apps or the Google account setup wizard. However, many older Huawei phones (like the P20, P30, Mate 20, and Honor 8X) do have GMS, and these are the ones where FRP is a common problem. On newer Huawei devices without GMS, FRP is not tied to a Google account, but the phone may still have a Huawei ID lock that behaves similarly.

How FRP Works on Huawei Phones

When you perform a factory reset on a Huawei phone that has Google services, the phone boots into a setup wizard. The wizard asks you to connect to Wi-Fi and then sign in with the Google account that was previously used on the device. If you don’t know that password, you cannot proceed past this screen.

The lock is stored in a secure partition on the device, and it is tied to the device’s unique identifiers (IMEI, serial number, and the Google account email). Simply flashing a new ROM or doing another reset will not clear the lock, because the FRP flag is stored in a separate partition that is not wiped by a standard factory reset.

On Huawei devices, there is an additional layer: the bootloader is usually locked, and Huawei stopped providing official bootloader unlock codes in 2018. This makes it harder to flash custom firmware or use low-level tools to remove the FRP partition.

General Methods That Work on Many Huawei Models

There are three main categories of FRP bypass methods for Huawei phones. Each works on a specific set of models and Android versions.

1. TalkBack Accessibility Method

This is the most widely known method and works on many Huawei models running Android 8, 9, or 10 with GMS. It uses the TalkBack screen reader to access the device’s settings during the setup wizard.

1. On the first screen (language selection), tap the “Emergency Call” button.
2. Type *#*#83781#*#* into the dialer and press the call button. This opens a hidden “Engineering Mode” menu.
3. In Engineering Mode, tap “Back” until you return to the setup wizard.
4. Now, enable TalkBack by pressing and holding the power button with two fingers, or by going to Settings > Accessibility > TalkBack (if accessible).
5. Use the TalkBack gesture (swipe right with one finger) to navigate to the “Google” app icon on the home screen (if it appears) or to the “Settings” app.
6. Once in Settings, go to Accounts > Add account > Google, and add a new Google account. This will bypass the FRP check.

This method is not guaranteed on all models, and the dialer code may not work on newer EMUI versions.

2. Dialer Code Method (for Older EMUI)

On some Huawei phones with EMUI 5 or earlier (Android 7), you can bypass FRP by using a dialer code during the setup wizard.

1. From the setup wizard, tap “Emergency Call”.
2. Type *#*#2846579#*#* to open the Project Menu.
3. Navigate to “Background Settings” and then “Google Settings”.
4. This may open a settings page where you can add a Google account directly.

Again, this is model-specific and often fails on newer devices.

3. Paid Unlocking Tools

If the free methods fail, you can use a paid software tool that runs on a Windows PC. These tools (such as those sold by GSM service providers) connect your Huawei phone to the computer via USB, read the device’s security partition, and remove the FRP flag. They typically cost between $10 and $50 and require a one-time purchase or a per-use credit.

These tools are not officially endorsed by Huawei or Google, and they often require a specific combination of device model, firmware version, and tool version. They are the most reliable option for newer models but come with a risk of voiding your warranty or, in rare cases, bricking the device if used incorrectly.

How to Choose the Right Method for Your Huawei

Before trying any bypass, you need to identify your exact model and firmware. Here is how to narrow it down:

• Check if your phone has Google apps: Go to the app drawer and look for the Play Store. If it is there, you have GMS and the TalkBack or dialer code methods may work.
• Check the Android version: Go to Settings > About phone. If it says Android 8 or higher, the TalkBack method is more likely to work. If it says Android 7 or lower, the dialer code method is more likely.
• Check the EMUI version: EMUI 5.x and earlier are more likely to respond to dialer codes. EMUI 8 and later often require the TalkBack method.
• If the phone is a 2019 or later model without GMS: FRP is not the issue; the phone may be locked to a Huawei ID. In that case, you need to contact Huawei support or use a Huawei ID unlock service.

Common Problems and What to Do When a Method Fails

It is very common for the free methods to fail, especially on newer EMUI versions. Here are the typical issues and how to handle them:

• The dialer code does nothing: This means the code is not supported on your firmware. Try a different code (e.g., *#*#1357946#*#* for some models) or move to the TalkBack method.
• TalkBack does not open the Settings app: On some devices, the Settings icon is hidden during the setup wizard. Try using the “Google” app (if present) and type “Settings” in the search bar, then open it from the results.
• The “Add account” option is greyed out: This happens when the device has already been partially set up. You may need to do another factory reset from recovery mode (power off, then press and hold Volume Up + Power) and start over.
• The phone reboots when you try to add a Google account: This is a security measure on some EMUI versions. Try the paid tool route instead.

Safety, Risks, and Legal Considerations

Bypassing FRP is legal if you own the phone or have the owner’s permission. Using these methods on a lost or stolen phone is illegal and against Google’s terms of service. The methods described here are for legitimate use cases, such as when you forgot your own Google account password after a reset.

There are risks involved in any bypass attempt:

• Data loss: Some methods may require a factory reset, which erases all data on the phone.
• Bricking: Using paid tools incorrectly can corrupt the device’s firmware, making the phone unusable.
• Warranty void: Unlocking the bootloader or using third-party tools may void your warranty.
• Security: Downloading tools from unknown websites can expose your computer to malware. Only use tools from reputable sources.

Alternatives to Bypassing FRP

If you cannot bypass the FRP lock, there are a few legitimate alternatives:

• Contact Huawei Support: If you have proof of purchase, Huawei may be able to unlock the device for you, especially if the issue is a Huawei ID lock rather than Google FRP.
• Use the original Google account: If you remember the email but not the password, use the “Forgot password” option on the setup screen. You will need access to the recovery email or phone number.
• Visit a professional phone repair shop: Many independent repair shops have the tools and experience to remove FRP for a fee.
• If the phone is stolen: Return it to the rightful owner or the police. Do not attempt to bypass the lock.

Frequently Asked Questions

Will a factory reset remove FRP on Huawei?

No. A factory reset does not remove FRP because the FRP flag is stored in a separate secure partition that is not wiped by a standard reset. That is why the lock persists even after you reset the phone.

Is there a free way to bypass FRP on Huawei?

Yes, the TalkBack method and dialer code methods are free, but they only work on certain models and Android versions. They are most likely to work on older Huawei phones (pre-2019) with GMS. Newer models usually require a paid tool.

Does the bypass work on Huawei phones without Google apps?

No. If your Huawei phone does not have Google apps (models released after 2019), there is no Google FRP lock. Instead, the phone may be locked to a Huawei ID, which is a different system. You cannot use the same bypass methods.

Can I bypass FRP on a Huawei phone that is Android 11 or higher?

It is very unlikely. Android 11 and higher have patched most of the known FRP bypass vulnerabilities. Paid tools may still work on some models, but free methods almost never work on these versions.

Is it safe to use paid FRP bypass tools?

It can be safe if you use a reputable tool and follow the instructions carefully. However, there is always a risk of bricking your device or infecting your computer with malware. Always download tools from well-known GSM service providers and read reviews before purchasing.

What should I do if I bought a used Huawei that is FRP locked?

First, ask the seller for the previous Google account credentials. If they cannot provide them, try the free methods. If those fail, contact the seller for a refund or use a paid bypass service. If the phone is reported lost or stolen, do not attempt to bypass it; return it to the carrier or seller.

Related

• Dig Dire Wolf Boss Guide: How to Beat It
• Beginner Drones: Which First Drone Fits Your Flying Plans?
• Poco F7 vs Redmi Note 17 Pro 5G: Specs Compared