keepcalculator

06 Numbers and Powers

Bypass Google Verification on Realme: What Works

Card No. 06·73489 · Updated · Standard formula, shown below

Google verification (FRP) locks a Realme phone after a factory reset if the previous Google account wasn’t removed. This article explains the legitimate, currently working methods to bypass it, what to try first, and why most “free unlock” claims are scams. The steps below apply to Realme UI 1.0 through 4.0 (Android 10–13) and require a second device with internet access.

What FRP Is and Why It Exists

Factory Reset Protection (FRP) is a Google security feature introduced with Android 5.1. After a reset, the phone asks for the Google account that was last synced on it. This stops a thief from wiping a stolen phone and selling it. On Realme devices, FRP is tied to the Google account, not to Realme’s own account. A bypass means getting past this login screen without the original credentials. It is not the same as unlocking the bootloader or rooting the phone.

How Realme’s FRP Differs from Other Brands

Realme phones run Realme UI, which is based on ColorOS (Oppo’s skin). That means the FRP bypass methods that work on Oppo often work on Realme, but not always on Xiaomi or Samsung. Realme’s setup wizard has a few known “gates” that can be tricked into opening the browser or settings. The most reliable methods exploit these gates. Newer Realme UI versions (3.0 and 4.0) patched many older tricks, so the method you use must match your Android version.

Method 1: TalkBack + YouTube (Works on Android 10–11)

This is the most common bypass for older Realme phones. It uses the TalkBack accessibility service to open the YouTube app from the setup wizard. Steps:

  1. On the FRP screen, tap the “Emergency call” button.
  2. Type *#*#83781#*#* (this opens the engineering menu on some Realme models). If that doesn’t work, try *#*#3646633#*#*.
  3. If the engineering menu opens, tap “Connectivity” then “WLAN” to connect to Wi-Fi.
  4. Go back to the emergency call screen and type #*#*83781#*#* again, then tap the menu button (three lines) and select “Settings”.
  5. In Settings, search for “TalkBack” and enable it.
  6. Return to the FRP screen, then use two fingers to swipe down the notification shade. Tap the YouTube notification or open YouTube from the app list if visible.
  7. In YouTube, tap the search bar and type “Settings”. A shortcut to Android Settings appears. Open it.
  8. From Settings, go to “Accounts” → “Add account” → “Google”. Sign in with a new Google account.
  9. Once signed in, go back to the setup wizard. The phone should skip FRP.

If the engineering menu codes don’t work, your model may have them disabled. In that case, try the next method.

Method 2: Wi-Fi + Browser Exploit (Android 12–13)

Newer Realme phones block the engineering menu codes. But a browser exploit still works on many Realme UI 3.0 and 4.0 devices. Steps:

  1. On the Wi-Fi selection screen, connect to a network.
  2. Tap the network name repeatedly (about 10 times) until a popup appears with options like “Modify network” or “Forget network”.
  3. Tap “Modify network”, then change the “Proxy” setting to “Manual”.
  4. In the “Hostname” field, type localhost and in “Port” type 8080. Save.
  5. Go back to the Wi-Fi screen. Tap the network again, then tap the arrow or “Connect” button. A browser window may open showing a proxy error.
  6. In the browser’s address bar, type chrome://version or chrome://flags. This opens Chrome settings.
  7. From Chrome settings, tap the three-dot menu and select “Settings”. Then go to “Site settings” → “Notifications”.
  8. Tap “Add site”, type google.com, and allow notifications.
  9. Go back to the browser and type google.com. A notification should appear. Tap it to open a new tab.
  10. In the new tab, type settings in the address bar. This opens Android Settings.
  11. From Settings, add a Google account as in Method 1.

This method is finicky. If the browser doesn’t open, try a different Wi-Fi network or a mobile hotspot.

Method 3: Using a Second Phone (Realme UI 4.0)

Realme UI 4.0 (Android 13) patched most browser exploits. A more reliable method uses the “Realme Link” app or the built-in “Phone Clone” app. Steps:

  1. On the FRP screen, tap “Set up device” and connect to Wi-Fi.
  2. On the setup wizard, tap “Copy data from old phone” or “Phone Clone”.
  3. On your second phone (any Android), install the “Phone Clone” app (from Realme or Oppo).
  4. Follow the on-screen instructions to connect the two phones via QR code.
  5. Once connected, the new phone may open the file manager or a settings page. If you can reach Settings, add a Google account as before.

This method works because the clone app sometimes grants temporary access to system settings. It is not guaranteed on all models.

Common Problems and Fixes

  • Engineering menu codes don’t work: Realme disabled them on many models. Skip to Method 2 or 3.
  • TalkBack won’t enable: Make sure you’re using two fingers for gestures. Tap the switch, then confirm with a double-tap.
  • YouTube doesn’t open: Try opening the notification shade and tapping the YouTube icon directly. If it’s not there, use the search bar in the notification shade.
  • Browser opens but Google settings don’t load: Type chrome://flags first, then navigate to Settings from there.
  • Phone restarts during the process: The bypass failed. Try a different method or a different Wi-Fi network.

What Doesn’t Work (and Why)

  • Online “unlock” services that ask for your IMEI: They either scam you or use the same free methods above.
  • Paying for a “bypass code”: No legitimate code exists. FRP is a security feature, not a subscription.
  • Flashing a custom ROM: This voids the warranty and may brick the phone if done wrong. It also doesn’t remove FRP from the current firmware.
  • Using a Google account from another phone: The account must be the one that was on the phone before the reset. A new account only works if you can add it via Settings.

Safety and Legal Notes

These bypass methods work only on a phone you own. Using them on a lost or stolen phone is illegal in most jurisdictions. Realme and Google may patch these exploits in future updates, so a method that works today may not work next month. If you are the original owner and you forgot your Google password, the official route is to recover the password via Google’s account recovery page. That is always the safest and most reliable path.

Frequently Asked Questions

Will a factory reset remove FRP on a Realme?

No. A factory reset triggers FRP. If the Google account was not removed before the reset, the phone will ask for it after the reset.

Can I bypass FRP without a PC?

Yes. Methods 1 and 2 above require only the phone and a Wi-Fi connection. Method 3 requires a second phone for the clone app.

Does the bypass work on Realme 8, 9, or 10 series?

It depends on the Android version. Realme 8 (Android 11) often works with Method 1. Realme 9 and 10 (Android 12 or 13) may need Method 2 or 3. There is no single method for all models.

What if the phone is linked to a Google account I don’t know?

If you bought the phone second-hand and the previous owner didn’t remove their account, you must contact them. There is no legitimate way to bypass FRP on a phone that was reported lost or stolen.

Is there a risk of bricking my phone?

These methods only change settings, not firmware. The risk of bricking is very low. However, flashing a custom ROM (which is not covered here) does carry a brick risk.

How long does the bypass take?

Usually 10–20 minutes. If it takes longer, you are likely using the wrong method for your Android version.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →