If your Canon camera or printer says the card cannot be accessed, it usually means the memory card is corrupted, locked, or incompatible with the device. You can often fix it by reinserting the card, checking the lock switch, or formatting the card in the camera—but formatting erases all data, so try recovery first if you have photos you need.
What “Card Cannot Be Accessed” Means
This error appears on Canon cameras (like EOS DSLRs and PowerShot models) and Canon printers when the device cannot read the file system on the memory card. The card may be physically present, but the camera’s firmware cannot mount it. Common causes include:
- Corrupted file system (e.g., from removing the card mid-write)
- Card locked via the physical lock switch on the side
- Card is too old or has worn-out flash memory
- Card incompatible with the device (e.g., SDXC in an older camera that only supports SDHC)
- Dirty or damaged contacts on the card or in the slot
- Firmware bug or camera needs a reset
How to Fix It: Step-by-Step
- Power off the camera and remove the card.
- Check the lock switch on the left edge of the card. If it’s slid down (toward the bottom), slide it up to unlock.
- Clean the gold contacts with a soft, dry cloth or an eraser. Avoid touching them with fingers.
- Reinsert the card firmly until it clicks, then power on.
- If the error persists, try the card in a card reader connected to a computer. If the computer reads it, back up your files immediately.
- If the computer also fails, try a different card in the camera. If the new card works, the original card is faulty.
- If the card is readable on a computer but not the camera, format the card in the camera (see next section).
Formatting the Card: When and How
Formatting erases all data and rebuilds the file system. Only do this after you’ve backed up or recovered what you need. To format in a Canon camera:
- Insert the card and turn on the camera.
- Press the Menu button.
- Navigate to the wrench (setup) tab.
- Select Format card (or “Format”).
- Confirm the action. Some cameras offer a “Low-level format” option—use it if the card is old or has bad sectors.
If the camera refuses to format and still shows the error, try formatting the card on a computer using the SD Association’s official formatter (for SD/SDHC/SDXC cards) or the camera’s own format function. For Canon printers, you may need to format the card on a computer first, then reinsert it into the printer.
Why Does This Error Happen?
Memory cards are flash storage with a finite number of write cycles. Over time, bad blocks accumulate. The camera’s controller may fail to read the file allocation table (FAT32 or exFAT) if the card was corrupted by an interrupted write—for example, if the battery died while saving a photo. Also, some Canon cameras are picky about card speed and type; using a card that is too slow for video recording can cause errors. Always check your camera’s manual for supported card types (SD, SDHC, SDXC, CF, etc.).
Common Mistakes to Avoid
- Ignoring the lock switch—it’s the number one cause of “card cannot be accessed” on SD cards.
- Formatting on a computer with the wrong file system—Canon cameras expect FAT32 for cards up to 32GB and exFAT for larger cards. Using NTFS will cause the camera to fail.
- Using a card reader that is faulty—try a different reader before blaming the card.
- Removing the card while the camera is writing—always wait for the access lamp to go off.
- Assuming the card is dead—often it’s just a corrupted file system that can be fixed with a format or recovery tool.
How to Recover Data Before Formatting
If you have photos on the card that you need, do not format yet. Try these steps:
- Use a card reader and connect to a computer.
- If the computer recognizes the card, copy all files to your hard drive.
- If the computer does not recognize it, try a data recovery program like Recuva (free) or PhotoRec (open source). These can often recover files from a corrupted file system.
- If the card is physically damaged, professional recovery services may be needed—but that’s usually expensive and only for critical data.
After recovery, format the card in the camera to restore normal function.
Preventing Future Card Errors
- Always format new cards in the camera, not just on the computer.
- Use a quality card from a reputable brand (SanDisk, Lexar, etc.) and buy from authorized sellers to avoid counterfeits.
- Don’t fill the card to 100%—leave some free space.
- Replace cards every 2–3 years if you use them heavily.
- Keep the card in a protective case when not in use.
- Update your camera’s firmware periodically—Canon sometimes fixes card compatibility issues.
Frequently Asked Questions
Will formatting the card fix the “cannot be accessed” error?
Yes, in most cases. If the card isn’t physically damaged, a format rebuilds the file system and the camera can access it again. However, if the card has bad sectors, the error may return.
Can I use a card that was used in another camera?
Yes, but it’s best to format it in your Canon camera before use. Cards formatted in other devices may have file systems that Canon doesn’t recognize.
Why does my Canon printer say “card cannot be accessed”?
Printers often have limited file system support. The card may be too large (e.g., 128GB) or formatted with exFAT, which older printers don’t support. Try a smaller card (32GB or less) formatted as FAT32.
Can a card be too slow for my Canon camera?
Yes, especially for 4K video or burst shooting. If the card’s write speed is too low, the camera may stop recording or show an error. Check the camera manual for minimum speed class (e.g., UHS-I or UHS-II).
Is there a way to bypass the error without formatting?
Sometimes. Try cleaning the contacts, reinserting the card, or using a different card reader. If the card is locked, unlock it. If the error persists, formatting is the only reliable fix.
What should I do if a new card also shows the error?
If a brand-new card fails, the problem is likely the camera’s card slot. Try another card in the slot; if all cards fail, the slot may be dirty or damaged. Clean it gently with compressed air, or have the camera serviced.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Arctic Sea Ice Forecasts Disagree: What to Do
- MySQL Workbench to VPS: SSH Tunnel Setup
- Bluesky Beginners Guide: How to Get Started5.00 min/km
- LG V20 Won’t Turn On? Fixed
- Snagit vs Camtasia: Which One Do You Need?
- Scale a Small Business Without Losing Culture