keepcalculator

06 Numbers and Powers

Check Bootloader Is Unlocked: How to Verify

Card No. 06·71066 · Updated · Standard formula, shown below

To check whether your Android device’s bootloader is unlocked, you can look in the system settings under “Developer options” or reboot into the bootloader/fastboot mode and read the status line. The exact method depends on your device brand and Android version, but the fastboot command fastboot oem device-info (or fastboot getvar unlocked on newer devices) is the most reliable way to get a definitive answer.

Why the Bootloader Lock Exists

Every Android phone ships with a locked bootloader. The bootloader is a small program that runs before the operating system; it initializes hardware and loads the kernel. A locked bootloader only allows booting software signed by the device manufacturer, which prevents unauthorized firmware from running. This is a security boundary: it stops malware from replacing your OS, protects warranty terms, and keeps features like Widevine L1 (for HD streaming) and Google Pay working. When you unlock the bootloader, you take responsibility for the device’s security and often lose those protections.

How to Check via System Settings

On most stock Android devices, the status is buried in Developer options. To see it:

  1. Go to Settings → About phone and tap Build number seven times until you see “You are now a developer!”
  2. Go back to Settings → System → Developer options.
  3. Look for OEM unlocking or Bootloader unlocked. If the toggle is grayed out or says “Bootloader already unlocked”, that’s your answer. On some phones (like Pixels), the setting simply shows whether unlocking is allowed, not whether it’s already done.

If you don’t see any bootloader-related option, the device may have a custom ROM or a manufacturer skin that hides it. In that case, use the fastboot method below.

How to Check via Fastboot (Most Reliable)

The definitive way to check is through the bootloader interface. You’ll need a computer with ADB and Fastboot tools installed (available from Google’s official platform-tools). Steps:

  1. Enable USB debugging in Developer options and connect your phone to the PC.
  2. Open a command prompt/terminal and type adb reboot bootloader. The phone will reboot into a fastboot menu.
  3. Type fastboot devices to confirm the phone is detected.
  4. For most devices, type fastboot oem device-info. Look for a line like Device unlocked: true or fastboot getvar unlocked which returns unlocked: yes.

If the command isn’t recognized, your device may use a different OEM command. For example, some Motorola and OnePlus devices respond to fastboot oem device-info, while newer Pixels respond to fastboot getvar unlocked. If neither works, try fastboot getvar all and scroll through the output.

What the Status Means for Your Device

An unlocked bootloader has real consequences beyond just being able to flash custom ROMs:

  • Warranty: Most manufacturers void the warranty once you unlock, even if you re-lock later.
  • SafetyNet/Play Integrity: Apps like banking, Google Pay, and some games will fail checks because the device can’t prove it’s running official firmware.
  • OTA updates: You may stop receiving automatic over-the-air updates, or they may fail to install.
  • Data wipe: Unlocking the bootloader erases all data on the phone (factory reset).

Knowing whether your bootloader is unlocked helps you understand why certain apps crash or why you can’t install a system update.

Common Misconception: OEM Unlocking Toggle vs. Actual Unlock

Many users confuse the OEM unlocking toggle in Developer options with the actual unlock status. The toggle only permits the bootloader to be unlocked later via fastboot. On some devices, flipping it to “on” does not unlock anything immediately. The actual unlock happens only when you run fastboot flashing unlock (or the OEM-specific command) and confirm on the phone screen. So if the toggle is on, your bootloader is still locked until you complete that step. Conversely, if the toggle is grayed out, it usually means the bootloader is already unlocked or the device is carrier-locked.

How to Re-lock the Bootloader (If You Want To)

If you’ve unlocked it and want to restore the locked state, the process is similar but uses a different command: fastboot flashing lock (or fastboot oem lock on older devices). This will wipe your data again and restore the stock bootloader. However, be aware that some manufacturers permanently mark the device as “unlocked” in hardware fuses, so even after re-locking, warranty and some security features may not be fully restored. Also, re-locking with a custom ROM installed can cause a boot loop, so you must flash the stock firmware first.

Frequently Asked Questions

Will checking the bootloader status erase my data?

No. Simply checking the status—whether via settings or fastboot commands—does not erase anything. Only the actual unlock or lock operation wipes your device.

Can I check the bootloader status without a PC?

Yes, on many devices you can check in Developer options as described above. Some phones also show a lock icon or “unlocked” text on the boot screen when you power on. If you have root access, you can run getprop ro.boot.verifiedbootstate in a terminal app, but that’s not universal.

My phone says “unlocked” in fastboot but I never unlocked it. What happened?

This can happen if you bought the phone second-hand and the previous owner unlocked it, or if the device is a carrier demo unit. It could also be a software glitch—try rebooting and checking again. If it truly is unlocked, you should re-lock it for security unless you want to keep it that way.

Does unlocking the bootloader improve performance?

Not by itself. Unlocking allows you to install custom ROMs, kernels, and mods that may improve performance or battery life, but the unlock itself doesn’t change anything. It also exposes you to security risks if you install untrusted software.

Can I unlock the bootloader on any Android phone?

No. Many carriers and some manufacturers (especially in the US) block bootloader unlocking entirely. Even when allowed, the process often requires a code from the manufacturer and may void your warranty. Check your device’s official support page for specific instructions.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →