keepcalculator

06 Numbers and Powers

How to Choose a Wireless Charger

Card No. 06·73493 · Updated · Standard formula, shown below

To choose a wireless charger, match the charger’s output power and standard (Qi) to your phone’s maximum wireless charging speed, then pick a design that fits how you use your phone. Enter your phone model and its stated wireless charging wattage, and this page explains what the numbers mean and what to look for in a pad, stand, or car mount.

How Wireless Charging Works

Wireless charging uses electromagnetic induction. A coil in the charger creates an alternating magnetic field, and a coil in the phone converts that field back into electrical current. The two coils must be aligned and close together—typically within a few millimeters. That’s why most pads require the phone to sit flat on the surface.

The Qi standard, developed by the Wireless Power Consortium, is the universal standard for consumer phones. Almost all modern phones support Qi, but the maximum speed varies by brand and model. Apple’s iPhones cap at 7.5W with standard Qi, though newer models support 15W with MagSafe. Samsung phones often support 15W with compatible chargers, while some Android phones support 10W or 15W.

Key Factors in Choosing a Wireless Charger

  • Output power (watts): A charger rated higher than your phone’s max won’t charge faster—the phone limits the speed. A charger rated lower than your phone’s max will charge slower.
  • Form factor: Pads are flat, stands hold the phone upright, and car mounts clip to vents or dashboards. Stands are useful for Face ID or video calls, while pads are more portable.
  • Coil alignment: Some chargers have multiple coils, so you can place the phone in different orientations. Single-coil chargers require precise placement.
  • Cooling: Heat reduces charging speed and battery lifespan. Chargers with fans or heat sinks can maintain higher speeds.
  • Cable and adapter: Many chargers don’t include a power adapter. The adapter must supply enough wattage—check the charger’s spec for the required adapter output.
  • Multi-device support: Some pads charge a phone, earbuds, and a watch simultaneously, but the total power is shared, so each device may charge slower.

Common Problems and Misconceptions

“My phone says charging, but it’s slow.” This is usually because the charger is lower wattage than the phone’s max, or the phone is misaligned. Check the charging screen for the wattage (if available) and reposition the phone.

“A 30W charger will charge my 15W phone faster.” No. The phone only draws what it supports. A 30W charger will still charge at 15W (or whatever the phone’s max is).

“Wireless charging is bad for my battery.” Heat is the main culprit. If the charger doesn’t have good cooling, the battery may degrade faster. But modern phones and chargers manage heat, and occasional wireless charging is generally safe.

“All Qi chargers are the same.” Not true. Build quality, coil design, and cooling differ. A cheap 5W charger may work, but it will be slow and may overheat.

Comparing Wireless Chargers

When comparing models, look at the listed output wattage and the number of coils. For example, a 15W single-coil pad is fine for one phone, but a 10W dual-coil pad lets you place the phone horizontally or vertically. Multi-device pads often split power—a 15W pad might give 10W to a phone and 5W to earbuds.

Also check the input requirement. A charger that accepts 5V/2A (10W) will not deliver 15W output; it needs 9V/2A or similar. The included cable matters too—a poor-quality cable can limit power delivery.

Cost and Value

Wireless chargers range from under $10 for basic 5W pads to over $50 for multi-device stands with cooling. The price difference reflects build quality, coil count, and included accessories. A $20 15W charger is often the sweet spot for most phones. If you need a stand or car mount, expect to pay a bit more.

Safety and Standards

Look for Qi certification or at least a reputable brand. Qi certification ensures the charger meets safety and interoperability standards. Avoid unbranded chargers that may lack overheat protection or foreign object detection (FOD). FOD prevents metal objects (like coins) from heating up on the pad. Always use the included cable or a quality cable that supports the charger’s power requirements.

Do not leave a phone on a wireless charger overnight if the charger lacks overcharge protection—though most modern chargers and phones handle this automatically. Keep the charging area free of metal objects and flammable materials.

Alternatives to Wireless Charging

Wired charging is still faster and more efficient. A 20W wired charger can fill a phone in about an hour, while wireless takes 2–3 hours. Wired also generates less heat and works while you hold the phone. If you need the fastest charge, use a cable. Wireless is best for convenience—dropping your phone on a pad at your desk or nightstand.

Frequently Asked Questions

Q: Can I use a wireless charger with a thick case?
Probably not. Cases thicker than about 3mm or with metal components block the magnetic field. Remove the case or use a charger with a higher output to compensate.

Q: Why does my phone get hot while wireless charging?
Heat is generated by the induction process and the phone’s battery. Poor alignment, a thick case, or a low-quality charger can increase heat. Stop charging if it becomes uncomfortably hot.

Q: Is it okay to leave my phone on the charger all night?
Yes, for most modern phones. They stop drawing power at 100% and trickle charge to maintain the level. However, prolonged heat can degrade the battery, so a cool, well-ventilated spot is better.

Q: Do I need to buy the same brand charger as my phone?
No. Qi is universal. Any Qi-certified charger will work, but the speed may be limited if the charger doesn’t support your phone’s fast wireless protocol (like Apple’s MagSafe or Samsung’s Fast Wireless Charging).

Q: How do I know if my phone supports wireless charging?
Check your phone’s specs on the manufacturer’s website or in the settings (usually under Battery). If it doesn’t mention wireless charging, it likely doesn’t support it.

Q: Can I use a wireless charger with a metal phone?
No. Metal blocks electromagnetic fields. Most phones with wireless charging have glass or plastic backs. If your phone has a metal back, it won’t charge wirelessly.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →