keepcalculator

06 Numbers and Powers

Comb Lasers: Data Center Link Demos

Card No. 06·74514 · Updated · Standard formula, shown below

Comb lasers—frequency combs that emit hundreds of evenly spaced optical lines—are being demonstrated in data center links to replace multiple individual lasers with one compact source, enabling higher bandwidth and lower power consumption. These demonstrations show that a single comb laser can carry tens of separate data channels over standard single-mode fiber, achieving aggregate speeds in the terabit-per-second range. The technology is still in the lab-to-product transition, but recent demos have pushed past 100 Tbps over a single fiber using comb-based transceivers.

What a Comb Laser Actually Does

A frequency comb is a laser whose output spectrum is a series of discrete, equally spaced frequencies, like the teeth of a comb. Each “tooth” can be modulated with data, effectively turning one laser into many. In data center links, this matters because the number of wavelengths needed for parallel optical interconnects has grown faster than the ability to package individual lasers at low cost.

  • Each comb line acts as an independent carrier wavelength.
  • Spacing is typically in the 10–100 GHz range, matching standard DWDM channel grids.
  • One comb source can feed dozens of modulators, replacing a rack of discrete lasers.

The key advantage is that all comb lines share the same phase and timing, which simplifies coherent detection and allows for higher-order modulation formats.

Recent Demonstrations in Data Center Links

Several research groups and industry labs have shown comb lasers working in realistic data center scenarios. In 2022, a team demonstrated a single comb source driving 50 wavelength channels, each carrying 200 Gbps, for a total of 10 Tbps over 50 km of fiber. More recently, a 2024 demo used a microcomb (a chip-scale comb) to transmit 100 Tbps over a single fiber, using both C- and L-bands.

What these demos have in common:

  • Use of standard single-mode fiber (SMF-28) and standard transceiver packaging.
  • Integration with silicon photonics modulators and photodetectors.
  • Bit-error rates below the forward-error-correction threshold (typically 1e-3 to 1e-4).
  • Power consumption per bit that is lower than discrete-laser arrays.

These are not just lab curiosities; several are being run on testbeds that mimic real data center links, including fan-out to multiple racks.

Why Data Centers Need Comb Lasers

Data center traffic is growing at 20–30% per year, and the number of optical links needed to connect servers, switches, and storage is exploding. Traditional approaches use one laser per wavelength, which becomes costly and power-hungry at scale. A 64-channel transceiver would need 64 separate lasers, each with its own driver and temperature control.

Comb lasers solve this by providing all 64 wavelengths from a single device. This reduces:

  • Cost per wavelength (one laser instead of 64).
  • Power consumption (one temperature controller instead of many).
  • Footprint (a single chip instead of a rack of lasers).

They also enable new architectures like “wavelength routing” where different racks receive different comb lines, making the network more flexible.

How Comb Lasers Are Made

There are two main types used in data center demos:

  1. Mode-locked lasers – emit a train of short pulses whose spectrum is a comb. These are mature but bulky and not easily integrated.
  2. Microcombs – use a continuous-wave laser injected into a micro-ring resonator; the nonlinearity generates a comb. These are chip-scale and compatible with silicon photonics.

Microcombs are the focus of most recent demos because they can be fabricated in standard CMOS foundries, potentially at low cost. The challenge is stabilizing the comb spacing and power uniformity across channels, which is being addressed with feedback loops and careful resonator design.

Challenges and Limitations

Despite the promise, comb lasers are not yet in every data center. Key issues include:

  • Power per line – each comb line has lower power than a dedicated laser, so amplification may be needed.
  • Linewidth – for coherent detection, each line must have narrow linewidth; microcombs can achieve this but with added complexity.
  • Thermal drift – comb spacing changes with temperature, requiring active stabilization.
  • Yield – manufacturing microcombs with uniform performance is still difficult.

These are engineering challenges, not fundamental physics, so most researchers expect them to be solved within a few years.

Comparison with Discrete Lasers

For a 32-wavelength link, a discrete-laser approach uses 32 lasers, each with a driver, a temperature controller, and a wavelength locker. A comb approach uses one comb source plus 32 modulators. The trade-off is that the comb source is more complex than a single laser, but the overall system is simpler and more efficient.

In terms of cost, comb sources are currently more expensive per unit, but the cost per wavelength is lower. As manufacturing matures, the cost advantage is expected to grow. Power-wise, combs can reduce transceiver power by 30–50% in recent demos, mainly by eliminating laser drivers and thermal control.

Future Directions

The next steps for comb lasers in data centers include:

  • Integration with co-packaged optics, where the comb and modulators sit on the same package as the switch chip.
  • Extending comb bandwidth to cover more of the O-band (1310 nm) for short-reach links.
  • Developing standards for comb-based transceivers so they can be interoperable.

Several industry consortiums are already working on these standards, and the first commercial comb-based transceivers are expected in the next few years.

Frequently Asked Questions

What is a comb laser in simple terms?

A comb laser is a single laser that produces many evenly spaced wavelengths at the same time, like a comb with many teeth. Each wavelength can carry data, so one comb laser can replace many individual lasers in a data center link.

How fast can comb lasers go?

Recent demonstrations have achieved over 100 Tbps on a single fiber using a comb laser. That’s enough to stream about 10 million HD movies simultaneously. In real data center links, speeds of 10–50 Tbps are more typical.

Are comb lasers used in data centers today?

Not yet in production. They are still in the research and development phase, but several companies are working on commercial versions. The first products are expected within the next 2–3 years.

What is the difference between a comb laser and a regular laser?

A regular laser emits light at one wavelength. A comb laser emits light at many wavelengths that are equally spaced. This is like the difference between a single-tone whistle and a chord.

Why not just use more lasers?

More lasers mean more cost, more power, and more space. Comb lasers offer a way to scale up the number of wavelengths without scaling up the number of lasers, which is crucial for future data center growth.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →