keepcalculator

06 Numbers and Powers

HP vs PS: Compare Power Ratings Without Confusion

Card No. 06·79829 · Updated · Standard formula, shown below

Metric horsepower (PS) 101.39 PS
Kilowatts (kW)
74.57 kW
Result
Horsepower (hp)
100 hp
You entered
You enter
Horsepower (hp)
You get
Metric horsepower (PS), Kilowatts (kW)
Rounding
2 dp

This article explains the difference between horsepower (hp) and metric horsepower (PS), how to convert between them, and why the numbers often look similar but are not identical. You’ll learn the exact conversion factor, how each rating is measured, and what to check so you don’t misread a spec sheet.

Formula

The conversion between horsepower and PS is a simple multiplication:

PS = hp × 1.01387

Where:

  • hp = mechanical horsepower (imperial), often called “brake horsepower” (bhp) in the UK.
  • PS = Pferdestärke, the German term for metric horsepower.

To go the other way: hp = PS × 0.98632.

Worked Example

Using the default value of 100 hp:

  1. Start with 100 hp.
  2. Multiply by 1.01387: 100 × 1.01387 = 101.387.
  3. Round to two decimals: 101.39 PS.

The calculator shows the same result: 101.39 PS. It also gives 74.57 kW, since 1 hp = 0.7457 kW.

Why Two Standards Exist

Horsepower was defined by James Watt in the 18th century to compare steam engines to horses. He measured that a horse could lift 550 pounds one foot in one second, giving 550 ft·lbf/s. That became the mechanical horsepower used in the US and UK.

Later, continental Europe adopted the metric system and defined its own horsepower: the power needed to lift 75 kilograms one meter in one second, which is 735.49875 watts. This is called PS (Pferdestärke) in German, CV (chevaux) in French, and often just “metric horsepower” in English.

The two definitions are close—about 1.4% apart—but not equal. That small difference rarely matters for everyday driving, but it can affect insurance, tax, or racing class calculations.

How to Read Spec Sheets Correctly

When comparing cars from different markets, check the unit used:

  • US and UK: usually hp (mechanical) or bhp (brake horsepower, which is measured at the engine’s flywheel).
  • Germany and much of Europe: PS (metric).
  • Most modern official documents: kilowatts (kW) are used in the EU, and increasingly worldwide.

If a spec sheet says “200 hp” and another says “200 PS,” the PS car actually has about 1.4% more power (202.8 hp). In practice, a 200 PS car is roughly equivalent to a 197 hp car.

Common Misconceptions and Mistakes

One frequent error is assuming hp and PS are identical. They are not, but the difference is small enough that many people ignore it. Another mistake is mixing up horsepower with torque—they are different measurements. Horsepower is the rate of doing work; torque is the twisting force. A car can have high torque and low hp, or vice versa.

Also, be careful with “brake horsepower” (bhp) vs. “horsepower” (hp). In the UK, bhp is used to mean power at the flywheel, while hp can refer to any type. In the US, hp usually means the same thing, but some manufacturers quote wheel horsepower (whp), which is lower due to drivetrain losses.

Why the Difference Matters

For most drivers, the 1.4% difference is negligible. If you’re comparing a 150 hp car and a 150 PS car, the PS car has about 2.1 hp more—not enough to feel. However, in professional racing, insurance classes, or vehicle taxation (some countries tax based on power), the exact figure can affect costs or eligibility.

For example, in some European countries, cars above a certain PS threshold pay higher taxes. If you import a US car, you may need to convert hp to PS for registration, and the difference could push you over a limit.

How to Choose the Right Unit for Your Needs

When comparing vehicles, always convert to one unit first. Use the calculator above to get the exact PS or hp. If you’re in a country that uses PS, convert all hp figures to PS. If you’re in the US, convert all PS figures to hp.

For official purposes (registration, insurance), use the unit required by your local authority. For personal comparison, the difference is so small that you can often ignore it, but it’s good to know the exact number if you’re negotiating or entering a competition.

Frequently Asked Questions

Is 1 PS equal to 1 hp?

No. 1 PS is approximately 0.98632 hp, and 1 hp is approximately 1.01387 PS. They are close but not equal.

Why do German cars list PS instead of hp?

Because PS is the metric horsepower unit used in Germany and most of continental Europe. It’s the standard in those markets, just as hp is in the US and UK.

What is the difference between bhp and hp?

Bhp (brake horsepower) refers to power measured at the engine’s flywheel, before losses from the gearbox, differential, and wheels. Hp is a general term that can mean any type of horsepower, but in the US it usually means the same as bhp. Wheel horsepower (whp) is measured at the wheels and is lower.

How do I convert kW to PS or hp?

1 kW = 1.35962 PS and 1 kW = 1.34102 hp. So multiply kW by 1.35962 to get PS, or by 1.34102 to get hp.

Does using PS instead of hp affect performance?

No. The unit doesn’t change the actual power; it’s just a different measurement scale. A car with 200 PS has the same physical power as a car with 197.3 hp.

Which unit is more accurate?

Neither is more accurate; they are just different definitions. PS is based on metric units (75 kgf·m/s), while hp is based on imperial units (550 ft·lbf/s). Both are approximations of a horse’s output.

Related

Formula used
in hp | Horsepower (hp) | hp | 100 | 0 | 10000
out ps | Metric horsepower (PS) | PS | hp * 1.01387 | 2
out kw | Kilowatts (kW) | kW | hp * 0.7457 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →