keepcalculator

06 Numbers and Powers

CS2 Competitive Server Config Settings for Matchmaking

Card No. 06·71935 · Updated · Standard formula, shown below

CS2 competitive server config settings for matchmaking are defined by Valve’s official competitive ruleset, which is enforced automatically when you play in Premier or Competitive matchmaking. You don’t need to create or edit a config file for standard matchmaking—the game applies the official competitive settings for you. However, if you host your own server or want to practice with competitive rules, you can use a custom configuration file or console commands to replicate the official settings.

Official Competitive Ruleset Overview

The competitive ruleset in CS2 is designed for 5v5 play with a 15-round half, a 30-round maximum, and overtime if needed. The settings are tuned to balance strategy, economy, and fairness. Key parameters include round time (1 minute 55 seconds), buy time (20 seconds), and a freeze time (15 seconds) at the start of each round. The C4 timer is 40 seconds, and the defuse time is 10 seconds (or 5 seconds with a defuse kit).

Valve enforces these settings on official matchmaking servers, so you don’t need to configure anything for normal play. But if you’re running a private server for scrims or practice, you can replicate these settings using a config file or console commands.

Base Config File Structure

For a custom server, you can create a competitive.cfg file in the csgo/cfg folder (or cs2/cfg depending on your install). This file is executed when you load the map or start the server. A minimal competitive config includes the following commands:

mp_competitive_startmoney 800
mp_maxmoney 16000
mp_roundtime 1.9167
mp_roundtime_defuse 1.9167
mp_buytime 20
mp_freezetime 15
mp_c4timer 40
mp_defuser_allocation 1
mp_timelimit 0
mp_maxrounds 30
mp_overtime_enable 1
mp_overtime_maxrounds 6
mp_overtime_startmoney 10000
mp_overtime_halftime 1
mp_match_can_clinch 1
mp_halftime 1
mp_halftime_duration 15
mp_afterroundmoney 0
mp_win_panel_display_time 10
mp_weapons_allow_map_placed 1
mp_weapons_allow_typecount 0
mp_weapons_tier_drop 0
mp_weapons_glow_on_ground 0
mp_weapons_allow_heavy 0
mp_weapons_allow_heavy_melee 0
mp_weapons_allow_heavy_assaultsuit 0
mp_weapons_allow_zeus 1
mp_weapons_allow_knife 1
mp_weapons_allow_taser 1
mp_weapons_allow_flash 2
mp_weapons_allow_smoke 2
mp_weapons_allow_he 2
mp_weapons_allow_molotov 2
mp_weapons_allow_decoy 2
mp_weapons_allow_incendiary 2
mp_weapons_allow_awp 1
mp_weapons_allow_ssg08 1
mp_weapons_allow_sg553 1
mp_weapons_allow_aug 1
mp_weapons_allow_mp9 1
mp_weapons_allow_mp7 1
mp_weapons_allow_ump45 1
mp_weapons_allow_p90 1
mp_weapons_allow_bizon 1
mp_weapons_allow_mac10 1
mp_weapons_allow_mp5sd 1
mp_weapons_allow_xm1014 1
mp_weapons_allow_nova 1
mp_weapons_allow_sawedoff 1
mp_weapons_allow_mag7 1
mp_weapons_allow_m249 1
mp_weapons_allow_negev 1
mp_weapons_allow_ak47 1
mp_weapons_allow_m4a1 1
mp_weapons_allow_m4a1_silencer 1
mp_weapons_allow_famas 1
mp_weapons_allow_galilar 1
mp_weapons_allow_deagle 1
mp_weapons_allow_elite 1
mp_weapons_allow_fiveseven 1
mp_weapons_allow_glock 1
mp_weapons_allow_hkp2000 1
mp_weapons_allow_p250 1
mp_weapons_allow_tec9 1
mp_weapons_allow_usp_silencer 1
mp_weapons_allow_cz75a 1
mp_weapons_allow_revolver 1
mp_weapons_allow_knife 1
mp_weapons_allow_taser 1

Note: The above list covers most weapons, but you can simplify by using mp_weapons_allow_typecount 0 and then explicitly disabling specific weapons if needed. In practice, the official competitive mode uses a whitelist that restricts certain weapons (like the M249 and Negev) from being purchased—they are still available on the ground but not buyable.

Key Settings Explained

Here are the most important settings you need to understand:

  • mp_roundtime – Length of each round in minutes. Competitive uses 1.9167 (1 minute 55 seconds).
  • mp_buytime – Time at the start of a round when you can buy items. Competitive uses 20 seconds.
  • mp_freezetime – Time at the start of a round when players are frozen and can’t move. Competitive uses 15 seconds.
  • mp_c4timer – Time for the bomb to explode after being planted. Competitive uses 40 seconds.
  • mp_maxrounds – Total rounds before the match ends (excluding overtime). Competitive uses 30.
  • mp_halftime – Whether teams switch sides at the halfway point. Competitive enables this.
  • mp_overtime_enable – Allows overtime when the match is tied after regulation.
  • mp_startmoney – Starting money for each player at the beginning of the match. Competitive uses 800.
  • mp_maxmoney – Maximum money a player can hold. Competitive uses 16000.

How to Apply the Config

To use your config on a dedicated server, place the file in the cfg folder and execute it after the map loads. You can do this by typing exec competitive.cfg in the console or by adding exec competitive.cfg to your server’s server.cfg file. If you’re hosting a listen server (for practice with bots), you can also run the config manually.

For matchmaking, you don’t need to do anything—Valve’s servers automatically apply the official settings. However, if you want to practice on a private server with the exact same rules, use the config above and adjust the bot settings as needed.

Common Mistakes and Misconceptions

One common mistake is using mp_roundtime 1.9167 but forgetting to set mp_roundtime_defuse to the same value. If you don’t set it, the defuse round time might default to a different value (like 1.75). Always set both.

Another misconception is that you need to set mp_weapons_allow_typecount 0 to disable weapon restrictions. In official competitive, certain weapons like the M249 and Negev are not buyable, but they still appear on the map. The game handles this via a separate weapon whitelist that isn’t exposed in the console. To replicate this, you can use mp_weapons_allow_typecount 0 and then explicitly set mp_weapons_allow_m249 0 and mp_weapons_allow_negev 0.

Also, note that mp_weapons_allow_heavy is a master switch for heavy weapons (like the M249 and Negev). Setting it to 0 disables all heavy weapons, but that’s not what competitive does—it only disables buying them. So you need to keep mp_weapons_allow_heavy 1 and then set individual weapon flags to 0.

Advanced Settings for Scrims and Practice

If you’re running a scrim or practice server, you might want to adjust a few more settings:

  • mp_autoteambalance 0 – Prevents the server from auto-balancing teams, which is useful for 5v5 scrims.
  • mp_limitteams 0 – Allows uneven teams (e.g., 5v4) for practice.
  • mp_spectators_max 10 – Allows more spectators for coaching.
  • mp_ready_restart 1 – Requires all players to be ready before the match starts (used in some leagues).
  • mp_ready_signal_team_ready 1 – Requires team captains to signal readiness.
  • mp_overtime_halftime 1 – Teams switch sides in overtime as well.
  • mp_overtime_startmoney 10000 – Starting money in overtime rounds (competitive uses 10,000).

Frequently Asked Questions

Do I need a custom config for matchmaking?

No. Matchmaking in CS2 automatically uses the official competitive ruleset. You don’t need to configure anything. Custom configs are only for private servers or practice.

What is the exact round time in competitive?

The round time is 1 minute 55 seconds, which is 1.9167 minutes in decimal. The buy time is 20 seconds, and the freeze time is 15 seconds.

Can I change the competitive settings on my own server?

Yes, you can change any settings on your own server. However, if you want to practice for matchmaking, it’s best to keep the settings identical to the official ruleset.

How do I set up a practice server with competitive rules?

Create a config file with the settings listed above, place it in the cfg folder, and execute it on your server. You can also use the exec command in the console.

Why do some weapons not appear in the buy menu on my custom server?

This is likely because you have mp_weapons_allow_typecount set to a value that restricts weapon types, or you have specific weapon flags set to 0. Check your config for any weapon restrictions.

What is the overtime format in competitive?

Overtime is played in sets of 3 rounds per side (6 rounds total per set). Teams switch sides after each set. The first team to win a set (winning 4 rounds in the set) wins the match. The starting money in overtime is 10,000.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →