keepcalculator

06 Numbers and Powers

Data Center Security Checklist for Customer Data

Card No. 06·76574 · Updated · Standard formula, shown below

This article provides a practical data center security checklist for businesses that store customer data. You’ll learn the physical, network, and operational controls to evaluate, plus how to verify a provider’s claims before signing a contract.

Why Data Center Security Matters for Customer Data

When your business stores customer data in a third-party data center, you are still responsible for its protection. Regulations like GDPR, HIPAA, and PCI DSS place the obligation on the data owner, not just the facility. A breach can lead to lawsuits, fines, and loss of customer trust. Therefore, you need a checklist that covers both the physical facility and the logical security of your systems.

A common misconception is that data center security is solely the provider’s job. In reality, it’s a shared responsibility. The provider secures the building, power, cooling, and network backbone, but you must secure your own servers, applications, and data. This checklist helps you evaluate both layers.

Physical Security Controls

Physical access to servers means direct access to data. Here are the key physical controls to verify:

  • Multi-factor authentication for all entry points – not just a badge, but also biometrics or PINs.
  • Mantrap or man-trap – a vestibule with two interlocking doors to prevent tailgating.
  • 24/7 surveillance – CCTV covering all entry points, aisles, and loading docks, with footage retained for at least 90 days.
  • On-site security personnel – trained staff who monitor access and respond to incidents.
  • Visitor logs – every visitor must be signed in, escorted, and have a clear purpose.
  • Delivery and disposal security – separate entrances for deliveries, and secure shredding for any media leaving the facility.

Ask the provider for their most recent SOC 2 Type II or ISO 27001 audit report. These certifications require independent verification of physical controls.

Network and Infrastructure Security

Once physical access is controlled, the network must be defended against remote attacks. Check for:

  • Redundant network connections – at least two diverse fiber paths to different internet backbones.
  • DDoS protection – either in-house or via a partner that can absorb large attacks.
  • Firewalls and intrusion detection/prevention systems – both at the perimeter and between customer segments.
  • Network segmentation – your servers should be in a separate VLAN or subnet from other tenants, so a compromise of one tenant doesn’t spread to you.
  • Encryption in transit – all data moving between your systems and the data center should be encrypted using TLS 1.2 or higher.

Also ask about their change management process. Any changes to network devices or firewalls should require approval and be logged.

Data Protection and Encryption

Protecting customer data at rest is critical. The checklist should include:

  • Encryption at rest – drives and backups should be encrypted with AES-256 or similar. Ask who holds the keys.
  • Key management – the provider should offer a hardware security module (HSM) or a cloud key management service. You should have control over your own keys.
  • Backup and disaster recovery – verify that backups are encrypted, tested regularly, and stored in a separate location. Ask for the recovery time objective (RTO) and recovery point objective (RPO).
  • Secure erasure – when you decommission hardware, the provider must guarantee that data is destroyed (e.g., via degaussing or physical shredding) and provide a certificate.

Be wary of providers that do not allow you to manage your own encryption keys. Without key ownership, you have less control over your data.

Operational and Compliance Considerations

Security is not just about technology; it’s about people and processes. Evaluate the provider’s operational practices:

  • Background checks – all employees with access to the facility should undergo background screening.
  • Incident response plan – the provider should have a documented plan and be willing to share a summary. They should notify you within a defined timeframe (e.g., 24 hours) of any security incident.
  • Compliance certifications – look for SOC 2, ISO 27001, PCI DSS, and HIPAA where applicable. Ask for the actual reports, not just a claim.
  • Right to audit – your contract should allow you (or a third party) to audit the provider’s controls, with reasonable notice.
  • Subcontractor management – if the provider uses third parties for cleaning, maintenance, or security, those vendors must also be vetted.

Also consider the provider’s financial stability. A data center that goes bankrupt could leave you without access to your data.

Common Mistakes and How to Avoid Them

Businesses often make these errors when evaluating data center security:

  • Focusing only on physical security – while important, network security and data encryption are equally critical.
  • Not reading the contract’s liability clause – many contracts limit the provider’s liability to a small fraction of the contract value. Understand what happens if they are negligent.
  • Ignoring the shared responsibility model – the provider secures the facility, but you must patch your servers, configure firewalls, and manage access.
  • Not testing backups – a backup that hasn’t been restored is not a backup. Test your disaster recovery plan at least annually.
  • Assuming all certifications are equal – a SOC 2 Type I is a point-in-time report, while Type II covers a period. Prefer Type II.

To avoid these, create a detailed checklist and visit the facility if possible. Ask to see the actual security controls, not just a slide deck.

Comparing Providers and Making a Choice

When comparing data centers, use a scoring matrix. Assign weights to each category (physical, network, data protection, compliance, cost) based on your business needs. Then score each provider. Here are some factors to compare:

  • Location – proximity to your office, but also risk of natural disasters (flood zones, earthquake faults).
  • Connectivity – number of carriers, and whether you can easily cross-connect to cloud providers.
  • Power and cooling – redundancy (N+1 or 2N), and the PUE (power usage effectiveness) which indicates energy efficiency.
  • Contract flexibility – can you scale up or down? What are the exit fees?
  • Support – 24/7 remote hands, and the response time for critical issues.

Remember that the cheapest option may lack critical security features.

Frequently Asked Questions

What is the most important security control in a data center?

There is no single most important control; security is layered. However, multi-factor authentication for physical access is often cited as a critical first line of defense, as it directly prevents unauthorized entry.

How often should I audit my data center provider?

At least annually, and whenever there is a significant change in your contract or the provider’s infrastructure. You can rely on their SOC 2 Type II report, but also consider a third-party penetration test of your own systems.

Can I rely on the data center’s encryption for my customer data?

You can rely on it only if you control the encryption keys. If the provider holds the keys, they can technically access your data. Always ask for bring-your-own-key (BYOK) options.

What is the difference between SOC 2 Type I and Type II?

Type I is a snapshot of the provider’s controls at a single point in time. Type II tests the operating effectiveness of those controls over a period (usually 6-12 months). Type II is generally more valuable for assessing ongoing security.

What should I do if my data center is breached?

Activate your incident response plan immediately. Notify your legal counsel, assess the scope, and inform affected customers as required by law. Also, review the provider’s breach notification timeline to ensure they met their obligations.

Is a colocation facility more secure than a cloud provider?

Not necessarily. Colocation gives you full control over hardware, but you are responsible for securing the OS and applications. Cloud providers often offer more advanced security tools (like identity management and encryption) but require you to configure them correctly. The best choice depends on your team’s expertise.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →