keepcalculator

06 Numbers and Powers

DNS Server Isn’t Responding: Fixes That Work

Card No. 06·73020 · Updated · Standard formula, shown below

When your browser says “DNS server isn’t responding,” it means your device couldn’t reach a DNS server to translate a domain name like example.com into an IP address. The fix is usually straightforward: restart your router, switch DNS servers, or clear your DNS cache—this guide walks through every step in order.

What DNS Actually Does

DNS (Domain Name System) is the internet’s phone book. Every website lives at a numeric IP address (e.g., 142.250.190.78), but humans remember names. When you type a URL, your device asks a DNS server, “What’s the IP for this name?” The server answers, then your browser connects to that IP. If the DNS server is unreachable or fails to respond, you get the “DNS server isn’t responding” error, even though your internet connection may be fine.

Your device uses DNS servers in a specific order: first the ones assigned by your router (usually from your ISP), then any manually configured ones. If the first server times out, it tries the next. The error appears when all of them fail or when the response is corrupted.

Why This Error Happens

  • ISP outage: Your internet provider’s DNS servers are temporarily down.
  • Router issues: The router’s DNS settings are wrong, or the router itself is frozen.
  • Local cache corruption: Your device’s stored DNS records are outdated or damaged.
  • Firewall/antivirus interference: Security software sometimes blocks DNS queries.
  • Misconfigured network settings: A manual DNS entry points to an unreachable server.
  • Malware: Rarely, malicious software alters DNS settings.

Note that this error is different from “DNS_PROBE_FINISHED_NXDOMAIN,” which means the domain itself doesn’t exist. Here, the server isn’t responding at all.

Quick Fixes to Try First

  1. Restart your router and modem: Unplug both, wait 30 seconds, plug the modem back in, then the router. This clears temporary glitches.
  2. Restart your device: A full reboot clears the DNS cache and resets network connections.
  3. Check other devices: If only one device fails, the problem is local. If all fail, it’s the network or ISP.
  4. Try a different browser: Sometimes browser extensions interfere. If it works in another browser, reset the first one.

Change Your DNS Server (Most Reliable Fix)

If the above don’t work, switch to a public DNS server like Google (8.8.8.8 and 8.8.4.4) or Cloudflare (1.1.1.1 and 1.0.0.1). These are free, fast, and rarely down.

On Windows 10/11: Go to Settings → Network & Internet → Advanced network settings → More network adapter options. Right-click your connection (Ethernet or Wi-Fi) → Properties → select “Internet Protocol Version 4 (TCP/IPv4)” → Properties → choose “Use the following DNS server addresses” and enter the numbers. Click OK.

On macOS: System Settings → Network → select your connection → Details → DNS → click “+” and add the addresses. Click OK.

On Android: Settings → Wi-Fi → long-press your network → Modify network → Advanced → IP settings → change to “Static” and enter DNS addresses. (Steps vary by manufacturer.)

On iOS: Settings → Wi-Fi → tap the “i” next to your network → Configure DNS → Manual → add servers.

After changing, restart your browser. If the error persists, move to the next steps.

Flush DNS Cache and Reset Network

Your device stores DNS responses to speed up future requests. If that cache is corrupted, it can cause this error even with a working DNS server.

Windows: Open Command Prompt as administrator and run ipconfig /flushdns. Then run ipconfig /release and ipconfig /renew to get a fresh IP address. Finally, netsh winsock reset to reset the network stack, then restart.

macOS: Open Terminal and run sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder (you’ll need your password).

Android/iOS: Toggle Airplane Mode on and off, or restart the phone.

Advanced Troubleshooting

If the error persists, try these deeper checks:

  • Disable IPv6 temporarily: Sometimes IPv6 DNS queries fail. On Windows, uncheck “Internet Protocol Version 6 (TCP/IPv6)” in the adapter properties. On macOS, set the IPv6 configuration to “Link-local only.”
  • Turn off firewall/antivirus temporarily: If the error disappears, add an exception for your browser or reinstall the security software.
  • Run a malware scan: Use Windows Defender or a reputable tool to check for DNS hijacking.
  • Check hosts file: On Windows, open Notepad as admin and open C:\Windows\System32\drivers\etc\hosts. Remove any lines that don’t start with #. On Mac/Linux, it’s /etc/hosts.
  • Reset router to factory defaults: This clears any bad DNS settings. You’ll need to reconfigure your Wi-Fi name and password.

When It’s Your ISP

If all your devices fail and you’ve tried everything, your ISP’s DNS may be down. You can confirm by checking if the router’s status page shows a public IP address and if you can ping an IP address directly (e.g., ping 8.8.8.8). If that works but ping google.com fails, it’s a DNS issue. In that case, change the DNS on your router itself (not just your device) so all devices benefit. Log into your router’s admin page (usually via 192.168.1.1 or 192.168.0.1), find the DNS settings under WAN or Internet, and enter public DNS addresses. Save and reboot the router.

If you still have no luck, contact your ISP—there may be an outage in your area.

Frequently Asked Questions

Why does this error happen on only one device?

That usually points to a local issue: corrupted DNS cache, wrong manual DNS settings, or a firewall on that device. Restart the device first, then flush the cache and check the adapter’s DNS settings.

Is it safe to use Google’s DNS (8.8.8.8)?

Yes. Google’s public DNS is widely used and free. It doesn’t give Google extra browsing data beyond what it already handles. Cloudflare’s 1.1.1.1 is another privacy-focused option.

Will changing DNS make my internet faster?

Sometimes. A faster DNS server can reduce the time it takes to load a website, but it won’t increase your download speed. If your ISP’s DNS is slow or overloaded, switching can feel snappier.

What’s the difference between DNS and Wi-Fi?

Wi-Fi is the wireless connection between your device and your router. DNS is a service that runs over that connection (or any internet connection) to translate names to IP addresses. You can have perfect Wi-Fi but broken DNS.

Can malware cause this error?

Yes, some malware modifies your DNS settings to redirect you to malicious sites. If you see the error only on certain sites, or if changing DNS doesn’t help, run a full malware scan.

Should I reset my router to factory settings?

Only as a last resort, because it wipes all your custom settings (Wi-Fi password, port forwards). If you’ve tried other fixes and the error persists, it’s worth doing. After resetting, reconfigure your network and update the router’s firmware if available.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →