keepcalculator

06 Numbers and Powers

Do You Need a Memory Card for Switch?

Card No. 06·79416 · Updated · Standard formula, shown below

No, you do not need a memory card (microSD card) for the Nintendo Switch to play games. Every Switch model includes internal storage (32 GB on the original and OLED models, 64 GB on the Lite), and all physical game cartridges save data directly to the console. However, if you buy most games digitally from the eShop, you will quickly run out of space, and a microSD card becomes essential for a comfortable library.

How Much Storage Does the Switch Actually Have?

The amount of usable storage is less than the advertised figure because the system software (the operating system, menu, and built-in apps) takes up a portion. In practice, you get roughly:

  • Nintendo Switch (original, 2017) and Switch OLED: about 25–26 GB usable out of 32 GB.
  • Nintendo Switch Lite: about 55–58 GB usable out of 64 GB.

That might sound like a lot, but modern games are large. A single AAA title like The Legend of Zelda: Tears of the Kingdom takes about 16 GB, and many third-party games exceed 10 GB. If you buy two or three big digital games, your internal storage is full.

Physical Cartridges vs. Digital Downloads: The Key Difference

The biggest factor in whether you need a memory card is how you buy games:

  • Physical cartridges: The game data is on the card, so it does not use internal storage. However, game updates, downloadable content (DLC), and save data are still stored on the console. A 32 GB internal drive can hold dozens of physical games’ updates and saves without issue.
  • Digital downloads: The entire game is installed to internal storage. This is where space runs out fast. If you prefer buying from the eShop, a microSD card is almost mandatory after a few purchases.

Also note: even with a physical cartridge, the Switch does not let you play the game without the cartridge inserted. The card only stores the game data; it does not act as a license or a save file.

What Can You Store on a microSD Card?

A microSD card on the Switch is used for:

  • Downloaded games from the eShop
  • Game updates and patches (even for physical games)
  • Downloadable content (DLC)
  • Screenshots and video captures

You cannot store save data on a microSD card. Save files are always kept in the console’s internal memory. This is a deliberate design choice by Nintendo to prevent cheating and to make it easier to transfer saves between consoles (via cloud saves with a paid subscription or system transfer).

Which microSD Card Should You Buy?

Nintendo officially supports microSD, microSDHC, and microSDXC cards. The practical requirements are:

  • Capacity: 64 GB to 1 TB is typical. 128 GB or 256 GB is the sweet spot for most players—enough for 15–30 large games without breaking the bank.
  • Speed: The Switch does not benefit from ultra-high-speed cards. A UHS-I card with a read speed of at least 60–90 MB/s is more than enough. Cards rated U1 (10 MB/s minimum write) or U3 (30 MB/s) both work fine; U3 is recommended if you record long video clips.
  • Brand: Stick with well-known brands (SanDisk, Samsung, Lexar) and buy from reputable retailers. Counterfeit cards are common and can corrupt data.

Formatting: The Switch will format a new card automatically when you insert it. It uses a proprietary format that only the Switch can read, so do not try to use the card in a PC afterward without reformatting.

How to Install and Manage a microSD Card

Installing a card is simple:

  1. Power off the Switch completely (hold the power button, select Power Options, then Turn Off).
  2. Open the kickstand on the back (original and OLED models) or the bottom flap on the Lite.
  3. Insert the microSD card with the label facing the back of the console (for original/OLED) or facing up (for Lite).
  4. Power on the console. It will prompt you to format the card—confirm.

After that, new downloads will automatically go to the card. To move existing games: go to System Settings → Data Management → Move Data Between System / microSD Card. You can move individual games or all of them at once. Note that moving games does not affect save data.

Common Problems and Misconceptions

“My Switch says the card is not compatible.” This usually means the card is too old (below 64 GB), is formatted incorrectly (e.g., exFAT on a PC), or is counterfeit. Try reformatting the card to FAT32 on a computer, then insert it again.

“Can I use one card in two Switches?” Technically yes, but the card is tied to the console that formatted it. If you put it in a different Switch, it will prompt to format it, erasing all data. You cannot share games this way.

“Do I need a card for saves?” No. Saves are always internal. If you lose your microSD card, you lose only games and screenshots, not your progress.

“Will a faster card make games load faster?” No. The Switch’s memory card interface is capped at UHS-I speeds, and most games load from the cartridge or internal storage anyway. A faster card only helps when transferring data to a PC.

Cost and Capacity: What’s the Realistic Budget?

Prices fluctuate, but as a rough guide (in USD):

  • 64 GB: $8–12
  • 128 GB: $12–18
  • 256 GB: $20–30
  • 512 GB: $40–60
  • 1 TB: $80–120

For most people, a 128 GB or 256 GB card is the best value. A 64 GB card fills up quickly, and 1 TB is overkill unless you buy dozens of large digital games. If you are primarily a physical collector, you may never need a card at all.

Frequently Asked Questions

Q: Can I use a microSD card from my phone or camera?
A: Yes, as long as it is a standard microSD, microSDHC, or microSDXC card. The Switch will format it, erasing all existing data. Make sure you back up anything important on the card first.

Q: What happens if I remove the microSD card while the Switch is on?
A: The Switch will warn you that the card is in use and may ask you to restart. It is safe to remove it when the console is powered off or in sleep mode with no game running. Removing it during a download or save write can corrupt data.

Q: Does the Switch support microSD Express cards?
A: No. The Switch only supports UHS-I cards. microSD Express cards (with a different pin layout) are not physically compatible with the Switch’s slot.

Q: Can I store screenshots on a microSD card?
A: Yes. Screenshots and video captures are saved to the microSD card by default once one is inserted. You can change this in System Settings → Data Management → Manage Screenshots and Videos.

Q: Do I need a memory card for the Switch Lite?
A: The Lite has 64 GB internal storage, which is double the original. You can fit more digital games, but large titles will still fill it up. If you plan to buy digital, a card is still recommended.

Q: Will a memory card improve performance or battery life?
A: No. The card only stores data; it has no effect on processing speed, frame rate, or battery life. The only performance difference is that loading times from a microSD card are slightly slower than from internal storage, but the difference is usually under a second.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →