keepcalculator

06 Numbers and Powers

Electronic Product Code: What It Identifies & How It’s Encoded

Card No. 06·70511 · Updated · Standard formula, shown below

An Electronic Product Code (EPC) is a standardized identifier stored on an RFID tag that uniquely identifies a specific individual product item, not just a product category. It encodes a manufacturer, product class, and a unique serial number, enabling each physical object to be tracked individually through supply chains and inventory systems. This article explains what EPCs identify, how they are structured and encoded, and how they compare to traditional barcodes.

Background: From Barcodes to Item-Level Tracking

The EPC was developed by the Auto-ID Center at MIT and later standardized by GS1, the same organization that manages UPC barcodes. Traditional barcodes identify a product class (e.g., a specific model of shampoo bottle), but not the individual bottle. EPCs extend this by adding a unique serial number, allowing each bottle to be tracked from factory to shelf. This enables applications like expiration date management, counterfeit detection, and real-time inventory visibility.

How EPC Encoding Works

EPCs are stored on RFID tags in binary form. The encoding scheme determines the length and structure. The most common are:

  • SGTIN-96: 96-bit, most widely used for retail items.
  • SGTIN-198: 198-bit, allows longer serial numbers (e.g., for vehicles or large items).
  • SGTIN-64: 64-bit, older and less flexible, now deprecated.

The encoding process converts the GS1 keys (GTIN, serial number) into a binary string. The header tells the reader which scheme is used. The partition field tells how to split the remaining bits. The serial number is stored in binary, but can be represented in decimal or alphanumeric depending on the scheme.

How to Choose the Right EPC Encoding

Choosing an encoding scheme depends on:

  • Serial number length: If you need more than 38 bits for serial numbers (e.g., 10+ digits), use SGTIN-198.
  • Tag memory capacity: Some tags only support 96-bit EPCs.
  • Industry standards: Retail typically uses SGTIN-96, while aerospace may use SGTIN-198.
  • Reader compatibility: Older readers may only support 64-bit.

For most retail applications, SGTIN-96 is sufficient and is the default choice.

Common Problems and Misconceptions

A frequent misconception is that an EPC is the same as a GTIN. A GTIN (Global Trade Item Number) identifies a product class; an EPC includes the GTIN plus a unique serial number. Another issue is misreading the partition table: if the partition is set incorrectly, the reader will misinterpret the company prefix and item reference. Also, EPCs are often confused with RFID tag IDs (TID), which are permanently programmed by the tag manufacturer and cannot be changed; EPCs are user-writable.

Comparison: EPC vs. Barcode vs. QR Code

  • Barcode (UPC): Identifies product class only, requires line-of-sight, low cost.
  • QR Code: Can encode more data (URLs, text), but still not unique per item unless serialized.
  • EPC (RFID): Unique per item, no line-of-sight required, can be read in bulk, but higher cost.

EPCs are superior for tracking individual items through complex supply chains, while barcodes remain cheaper for simple point-of-sale.

Cost and Implementation Considerations

RFID tags with EPCs cost more than barcodes (typically a few cents per tag vs. fractions of a cent for printed barcodes). Readers and infrastructure add to the cost. However, for high-value items or where bulk reading is needed, the efficiency gains often justify the expense. Companies must also ensure data synchronization with their ERP systems.

Safety and Privacy

EPCs themselves contain no personal data, but they can be used to track items that a person carries, raising privacy concerns. Modern RFID tags can be killed (permanently disabled) or have their EPCs encrypted. Standards like the EPCglobal Gen2 allow password-protected access. For consumer privacy, some retailers disable tags at the point of sale.

Frequently Asked Questions

What does an EPC identify?

An EPC identifies a specific physical item, including its manufacturer, product type, and a unique serial number. For example, a particular pair of sneakers has a distinct EPC that differs from every other pair of the same model.

How is an EPC encoded on an RFID tag?

The EPC is stored as a binary number in a specific memory bank on the tag. The encoding scheme (e.g., SGTIN-96) defines the length and bit layout. The tag transmits this binary data to a reader, which decodes it into a human-readable format like a URI.

Can an EPC be changed?

Yes, EPCs are stored in user-writable memory and can be rewritten, provided the tag supports it and the reader has the proper access password. However, some tags have locked EPC memory to prevent tampering.

Is an EPC the same as a serial number?

No, the serial number is only part of the EPC. The EPC also contains the company prefix and item reference, so it fully identifies the item globally.

What is the difference between EPC and RFID?

RFID is the technology (radio-frequency identification) that uses radio waves to communicate. EPC is a specific data standard that can be stored on an RFID tag. RFID tags can store other data, but EPC is the most common for supply chain.

How do I read an EPC?

You need an RFID reader that supports the EPC standard (e.g., EPC Gen2). The reader captures the binary data and converts it to a URI or other format using software that follows the EPC Tag Data Standard.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →