To enable Wyze Cam person detection, open the Wyze app, go to your camera’s settings, and turn on Person Detection under Event Recording (this requires a Cam Plus subscription for most models). This article explains the exact steps, the subscription requirements, the differences between models, and common troubleshooting issues.
What Is Wyze Person Detection?
Wyze Cam person detection uses on-device or cloud-based AI to distinguish a human shape from other moving objects like cars, animals, or blowing leaves. When enabled, the camera tags events with a “Person” label and can filter motion notifications to only alert you when a person is detected. This reduces false alerts and makes it easier to find important clips in the event timeline.
Without person detection, the camera records all motion events, which can generate dozens of notifications a day from passing cars, swaying branches, or shadows. With it, you get a notification only when the camera believes it sees a human, which is the main reason most users want to enable the feature.
How to Enable Person Detection (Step-by-Step)
The steps are the same for Wyze Cam v2, v3, Pan v1/v2, and Wyze Cam Floodlight, but the exact menu names may vary slightly by app version. Here is the standard path:
- Open the Wyze app and log in to your account.
- Tap on the camera you want to configure from the Home screen.
- Tap the gear icon (Settings) in the top-right corner.
- Select Event Recording (or Detection Settings on some versions).
- Under Person Detection, toggle the switch to ON.
- If you haven’t already, you’ll be prompted to subscribe to Cam Plus or start a free trial. Follow the on-screen instructions.
- Once enabled, you can also customize whether you receive push notifications for person events only, or for all motion.
If you don’t see the Person Detection toggle, it’s because your camera model or firmware doesn’t support it without Cam Plus. Check the section below for model-specific details.
Which Wyze Cams Support Person Detection?
Person detection is available on most Wyze Cam models, but the implementation differs:
- Wyze Cam v2 and v3: Support person detection via Cam Plus subscription (cloud-based).
- Wyze Cam Pan v1 and v2: Support person detection via Cam Plus; the Pan v2 also has on-device AI for faster detection.
- Wyze Cam Floodlight and Wyze Cam Outdoor: Support person detection via Cam Plus.
- Wyze Cam OG and Telephoto: Support person detection via Cam Plus.
- Wyze Cam v1 (original): Does NOT support person detection at all, even with Cam Plus.
The Wyze Cam v1 is the only model without this feature. If you have a v1, you’ll need to upgrade to a newer model to use person detection.
Cam Plus Subscription Requirements
Person detection is a paid feature on all Wyze Cams (except the v1 which lacks it entirely). Wyze offers a subscription called Cam Plus that unlocks person detection, package detection, vehicle detection, and longer event recording (up to 3 minutes per event with continuous recording).
Cam Plus is sold per camera, with annual and monthly plans. There is also a Cam Plus Unlimited plan that covers all cameras on your account. Wyze occasionally offers a free trial (usually 14 days) when you first enable the feature, so you can test it before paying.
Without Cam Plus, you get free motion detection with 12-second clips, but no person/vehicle/package labels and no smart notifications.
How to Set Up Person-Only Notifications
Once person detection is enabled, you can choose to receive notifications only for person events. This is the most common reason users enable the feature. Here’s how:
- In the camera’s live view, tap the Notifications icon (bell) at the top.
- Select Event Notifications.
- Under Motion, choose Person (if you have Cam Plus).
- You can also set a schedule to silence notifications during certain hours.
This way, you’ll only get a push notification when a person is detected, not for every car that passes. If you still want to record all motion events, leave the “Motion” toggle on but set notifications to “Person” only.
Common Problems and Fixes
Users often encounter issues when trying to enable person detection. Here are the most common ones and how to resolve them:
- Toggle is grayed out: This usually means the camera doesn’t support person detection (v1) or you haven’t subscribed to Cam Plus. Tap the toggle anyway – it may prompt you to start a trial.
- Person detection not working after enabling: Wait a few minutes for the camera to update. Then test by walking in front of the camera. If it still doesn’t detect you, check that the camera’s firmware is up to date (Settings > Device Info > Firmware).
- False positives (detects non-humans as people): The AI is not perfect. Shadows, reflections, or pets can sometimes trigger person detection. Adjust the camera angle to avoid these, or lower the detection sensitivity in the settings.
- Notifications delayed: Cloud-based detection can take a few seconds. If you need faster alerts, consider a camera with on-device AI (like Pan v2) or ensure your Wi-Fi signal is strong.
- Person detection not available in your region: In some countries, AI features are restricted. Check Wyze’s official support page for availability.
Person Detection vs. Motion Detection
Basic motion detection triggers on any change in the pixel pattern – a car, a bird, a shadow. Person detection uses a neural network to classify the object as a human. The difference is significant:
- Motion detection: Free, works on all Wyze cams, records 12-second clips, sends a notification for every event.
- Person detection: Requires Cam Plus, records up to 3-minute clips, sends notifications only when a human is detected, and adds a “Person” label in the event list.
If you have a busy street, person detection is almost essential to avoid notification fatigue. If your camera faces a quiet backyard, motion detection alone may be sufficient.
Cost and Alternatives
Cam Plus costs around $1.99 per camera per month (annual billing) or $2.99 month-to-month. There’s also a $9.99/month unlimited plan for all cameras. These prices are approximate and can change, so check the Wyze app for current rates.
If you don’t want to pay a subscription, consider these alternatives:
- Use motion detection only: Free, but you’ll get more false alerts.
- Set up activity zones: Free, and you can restrict motion detection to a specific area (like your front door) to reduce false triggers.
- Use a third-party app like TinyCam Monitor (Android) or Home Assistant: These can access the camera’s RTSP stream (if enabled) and use local AI for person detection, but they require technical setup and a compatible hub.
- Switch to a camera with free person detection: Some other brands offer free person detection, but they may have higher hardware costs.
Privacy and Security Considerations
When you enable person detection, video clips are processed by Wyze’s cloud servers (unless you have a camera with on-device AI). This means your footage is transmitted to and stored on Wyze’s servers, even if you have a local SD card. Be aware of the following:
- Wyze’s privacy policy states that they do not sell your video, but they may use clips to improve their AI models (with your consent).
- Use two-factor authentication on your Wyze account to prevent unauthorized access.
- If you’re concerned about cloud processing, consider a camera that supports fully local person detection, such as the Wyze Cam Pan v2 (which has on-device AI) or other brands like Reolink or Eufy.
Frequently Asked Questions
Does Wyze Cam person detection work without Cam Plus?
No, person detection requires a Cam Plus subscription on all supported models. The only exception is a free trial period when you first enable it. Without Cam Plus, you only get basic motion detection.
Why is my Wyze Cam not detecting people?
First, ensure person detection is enabled in the camera’s Event Recording settings and that you have an active Cam Plus subscription. Then check the camera’s placement – if it’s too high or too far, the AI may not recognize people. Also, update the camera’s firmware and restart it. If the issue persists, contact Wyze support.
Can I get person detection on Wyze Cam v1?
No, the original Wyze Cam v1 does not support person detection at all, even with Cam Plus. You would need to upgrade to a v2, v3, or newer model to use this feature.
How much does Cam Plus cost?
Cam Plus is approximately $1.99 per camera per month (billed annually) or $2.99 month-to-month. There’s also a Cam Plus Unlimited plan for about $9.99 per month that covers all cameras on your account. Prices may vary, so check the app for the latest.
Does person detection work on Wyze Cam Pan v2 without a subscription?
No, even though the Pan v2 has on-device AI, person detection still requires a Cam Plus subscription. The on-device AI only speeds up the detection process, but the feature is still locked behind the paywall.
Can I use person detection with an SD card?
Yes, you can record continuous footage to an SD card and still have person detection. The camera will tag events with “Person” in the timeline, and you can review them later. However, the person detection itself still requires Cam Plus.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Omega ORU52X Specs: What They Mean for You42.00 cu ft
- AI Agent State Safety During Context Compaction
- Games Like Assassin’s Creed: 12 Open-World Picks
- KCD2 Blacksmith’s Son Quest Guide
- Delete Stations Pandora? How to Remove Them
- How to Play Brawl Stars Without an Emulator