keepcalculator

06 Numbers and Powers

Essential Phone Teardown: Inside the PH-1

Card No. 06·73902 · Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered
You enter
Finish time, Distance
You get
Average pace, Average speed
Rounding
2 dp

The Essential Phone (PH-1) teardown reveals a device that is simultaneously innovative and frustrating to repair: it uses a unique modular magnetic connector and a ceramic back, but the display is glued to the frame and the battery is firmly adhered, earning it a low repairability score. This article walks through the internal layout, the tools needed, and the step-by-step process of opening the phone, based on the physical design of the device.

Background: The PH-1’s Design Philosophy

The Essential Phone, released in 2017, was the brainchild of Andy Rubin, a co-founder of Android. Its design goal was to create a premium, minimalist device that felt like a solid slab of material. To achieve this, Essential used a titanium frame and a ceramic back, both of which are more rigid than the aluminum and glass used in most phones at the time. The phone also introduced a proprietary magnetic accessory connector on the back, which was used for a 360-degree camera module and a headphone jack adapter. This connector is a key part of the teardown, as it is one of the few modular elements in a phone that is otherwise sealed shut.

How the Phone is Constructed

The Essential Phone’s construction is unusual. The front is a 5.71-inch display with a notch, and the back is a single piece of ceramic that curves at the edges. The titanium frame runs around the entire perimeter. Unlike most phones, the back panel is not meant to be removed first. The display is the primary access point. The screen is glued to the frame with a strong adhesive, and it is the first component you must remove to see the internals. Under the screen, you find the mid-frame, which holds the motherboard, battery, and other components. The ceramic back is only removable after the display and mid-frame are taken out, and it is also glued in place.

Tools and Equipment Needed

To perform this teardown, you will need a set of standard phone repair tools. The following list is what a typical teardown requires:

  • Phillips #00 screwdriver
  • Tri-point Y000 screwdriver (for the screws on the motherboard)
  • Plastic opening picks and spudgers
  • Suction cup
  • Heat gun or hair dryer
  • iOpener or similar heat pack (optional)
  • Adhesive strips or replacement adhesive for reassembly

Because the display is glued with a strong adhesive, heat is essential to soften it. Without a heat source, you risk cracking the screen during removal.

Step-by-Step Teardown Process

  1. Heat the display: Apply heat around the edges of the display for several minutes to soften the adhesive.
  2. Lift the display: Use a suction cup to create a gap, then insert a plastic pick to cut the adhesive. Work your way around the entire perimeter.
  3. Open the phone: Swing the display open like a book, being careful not to pull the display cable that connects to the motherboard.
  4. Disconnect the battery: Use a spudger to disconnect the battery connector from the motherboard. This is a safety step to prevent short circuits.
  5. Remove the mid-frame: Unscrew the Phillips screws around the mid-frame and lift it out. The mid-frame holds the motherboard and the battery.
  6. Remove the motherboard: Unscrew the tri-point screws on the motherboard, then gently lift it out. The USB-C port is attached to the motherboard via a flexible cable.
  7. Remove the battery: The battery is adhered to the mid-frame with a strong adhesive. Use a spudger to pry it out. It is not a pull-tab design, so this can be difficult.
  8. Remove the ceramic back: If you need to access the wireless charging coil or the magnetic connector, heat the back panel and use a pick to separate it from the frame.

Repairability Score and Common Issues

Professional teardown services gave the Essential Phone a repairability score of 3 out of 10, where 10 is easiest to repair. The main reasons for this low score are:

  • The display must be removed first, and it is glued in place, making it the most likely component to crack during repair.
  • The battery is not designed for easy removal; it lacks pull-tabs and is firmly glued.
  • The ceramic back is also glued and can shatter if not handled carefully.

Common issues that require a teardown include a cracked screen, a dead battery, or a faulty USB-C port. The USB-C port is soldered to a small board, which is separate from the main motherboard, so it can be replaced without replacing the entire logic board.

Comparison with Other Phones

Compared to other phones from the same era, the Essential Phone is notably harder to open than an iPhone 8, which uses a similar screen-first approach but has a battery with pull-tabs. It is also harder than the Samsung Galaxy S8, which allows you to remove the back glass first. The modular magnetic connector is a unique feature, but it does not make the phone user-serviceable; it only allows for accessories. The titanium frame is strong, but it also means the phone is heavier than its plastic or aluminum counterparts.

Safety Precautions

When performing a teardown, always take the following precautions:

  • Disconnect the battery before disconnecting any other component.
  • Use a plastic tool to pry, never a metal one, to avoid scratching the motherboard.
  • Do not puncture the battery; it can catch fire.
  • Apply heat carefully; excessive heat can damage the display or the battery.

If you are not confident in your ability to complete the teardown, it is safer to take the phone to a professional repair service.

Frequently Asked Questions

Is the Essential Phone easy to repair at home?

No, it is not. The display-first design and strong adhesive make it one of the harder phones to repair. You need a heat gun and a steady hand to avoid cracking the screen. If you are not experienced, the risk of breaking something is high.

Can I replace the battery without removing the screen?

No. There is no removable back panel. The only way to access the battery is through the front, meaning you must remove the display first. This is the biggest hurdle for battery replacement.

What is the magnetic connector on the back for?

It is a proprietary accessory connector. It was used for the 360-degree camera module and a headphone jack adapter. It also provides a data connection, but it is not used for charging.

Why is the ceramic back so hard to remove?

It is glued to the frame with a strong adhesive, and ceramic is brittle. Trying to pry it off without heating it first can crack the back. Even with heat, it is easy to damage if you use too much force.

Does the Essential Phone have a headphone jack?

No, it does not. It relies on the USB-C port for audio, and the magnetic connector can be used with an accessory that adds a headphone jack. This is one of the reasons the phone was considered ahead of its time, but also inconvenient for some users.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0 | 100000
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →