Before Wi-Fi and Ethernet became universal, computers were connected through a surprising variety of wired and wireless standards that are now largely forgotten. These include serial RS-232, parallel (Centronics), Token Ring, ARCnet, and early wireless options like IrDA and HomeRF. Each solved the same core problem—moving data between machines—but did so with different speeds, cables, and topologies that shaped how networks evolved.
The Landscape Before Ethernet and Wi-Fi
In the late 1970s and 1980s, there was no dominant networking standard. Computer manufacturers each built their own proprietary systems. IBM had its own cabling and protocols, Apple used LocalTalk on its Macintosh line, and many small offices relied on simple serial connections. Ethernet existed but was expensive and not yet standardized at the IEEE 802.3 level (that came in 1983). The result was a fragmented market where compatibility between brands was rare.
Most early networking was done over existing telephone-style wiring or simple cables that carried data one bit at a time. The idea of a single cable connecting dozens of computers with speeds above 10 Mbps was still years away. Instead, users accepted slow speeds, limited distances, and the need to buy all equipment from one vendor.
Serial RS-232: The Original Computer Link
RS-232, defined in 1960 by the Electronic Industries Association, was the standard for connecting computers to modems, terminals, and other computers. It used a simple point-to-point link over a cable with up to 25 pins (though 9-pin versions became common). Data traveled one bit at a time, at speeds that started at 300 bits per second (about 30 bytes per second) and later reached 115,200 bps.
To connect two computers directly without a modem, you needed a null modem cable that crossed the transmit and receive lines. This allowed file transfers using protocols like XMODEM or ZMODEM. While RS-232 was reliable and simple, it only connected two devices. Networking multiple computers required a switch or a multiplexer, and the speed was far too slow for sharing files or printers in a busy office.
Parallel and Centronics: Speed for Printers and Beyond
The parallel port, originally designed by Centronics in the 1970s, sent 8 bits at a time over separate wires, making it much faster than serial for short distances. It became the standard way to connect printers to PCs. But it could also be used for networking with a Laplink cable or a parallel-to-parallel adapter, allowing two computers to transfer files at up to 2 Mbps in early implementations.
Parallel networking was limited to two machines (or a small ring with special hardware) and required that both computers run the same software. It was popular for transferring files between a desktop and a laptop, but it could not scale to a real network. The parallel port’s speed advantage was soon overtaken by Ethernet, which offered 10 Mbps on a shared cable.
Token Ring and ARCnet: Structured but Clunky
IBM’s Token Ring, introduced in 1984, used a logical ring topology where a token (a special data frame) circulated among computers. Only the computer holding the token could send data, which prevented collisions and made performance predictable. Speeds were 4 Mbps and later 16 Mbps. Token Ring used special IBM cabling (often shielded twisted pair) and required a MAU (Multistation Access Unit) to connect devices. It was reliable but expensive and difficult to install.
ARCnet (Attached Resource Computer Network) was developed by Datapoint in 1977 and became popular in small business networks because it was cheap and used simple coaxial cable or even telephone wire. It ran at 2.5 Mbps and used a token-passing scheme similar to Token Ring, but on a bus or star topology. ARCnet was widely used in the 1980s for small offices and industrial control, but its speed was too low for growing data needs.
Apple LocalTalk and Other Proprietary Systems
Apple introduced LocalTalk in 1985 as a built-in networking feature for the Macintosh. It used a simple two-wire cable (often telephone-style) and ran at 230.4 kbps—far slower than Ethernet but good enough for sharing printers and small files. LocalTalk’s beauty was its simplicity: any Mac could connect to another with just a cable. However, it was slow and limited to about 32 devices per network segment.
Other proprietary systems included DECnet (Digital Equipment Corporation), which ran over serial lines and later Ethernet, and various mainframe terminal networks like IBM’s SNA. These were designed for specific vendor ecosystems and did not interoperate with other standards. The lack of a common standard was a major pain point for businesses that wanted to mix equipment from different vendors.
Early Wireless: Infrared and HomeRF
Before Wi-Fi (IEEE 802.11) became mainstream in the late 1990s, wireless networking was attempted with infrared (IrDA) and a short-lived standard called HomeRF. IrDA used infrared light to beam data between devices that were within a few meters and had a clear line of sight. It was used for printers, laptops, and early mobile phones, with speeds up to 4 Mbps. But you had to point the devices at each other, and walls or even bright sunlight could break the connection.
HomeRF was a wireless standard designed for home networks, using the 2.4 GHz band with a range of about 50 meters and speeds up to 10 Mbps. It was promoted by a consortium including Intel and Motorola but lost to Wi-Fi because Wi-Fi offered higher speeds and broader industry support. HomeRF was discontinued by 2003, leaving Wi-Fi as the dominant wireless standard.
Why These Standards Faded
Ethernet won because it was open, scalable, and fast. The IEEE 802.3 standard allowed multiple vendors to build compatible equipment, and speeds increased from 10 Mbps to 100 Mbps, then 1 Gbps and beyond. Token Ring and ARCnet were proprietary or slower, and they could not keep up with Ethernet’s cost reductions and ecosystem growth.
Similarly, Wi-Fi (802.11) succeeded because it was an open standard with strong industry backing, offering enough speed and range for home and office use. IrDA and HomeRF were either too limited or too late. The lesson is that networking standards succeed when they are open, fast, and easy to deploy—factors that today’s Wi-Fi and Ethernet still embody.
Frequently Asked Questions
Could you still use these old standards today?
Yes, but with difficulty. RS-232 ports still exist on some industrial equipment and servers, and you can buy USB-to-serial adapters. Parallel ports are virtually gone from modern computers, but you can find PCIe cards that add them. Token Ring and ARCnet are obsolete; you would need vintage hardware and software to use them, and finding drivers is nearly impossible.
What was the fastest of these old standards?
Token Ring at 16 Mbps was the fastest of the wired standards mentioned. In practice, Ethernet at 10 Mbps was often faster in real-world throughput because Token Ring’s token-passing overhead reduced effective speed. HomeRF reached 10 Mbps in theory, but real-world speeds were lower.
Why did Ethernet beat Token Ring?
Ethernet was cheaper, simpler, and open. Token Ring required expensive MAUs and shielded cabling, while Ethernet used inexpensive coaxial cable or unshielded twisted pair. Ethernet also had a larger ecosystem of vendors and support, and its collision detection (CSMA/CD) was good enough for most networks. As Ethernet speeds increased, Token Ring could not compete.
Were there any wireless standards before Wi-Fi?
Yes, IrDA (infrared) and HomeRF were the main ones. IrDA required line-of-sight and short range, making it impractical for general networking. HomeRF was a radio-based standard but lost to Wi-Fi because Wi-Fi had more industry support and better performance. There were also proprietary wireless systems from vendors like Motorola, but they were not interoperable.
How did people transfer files between computers before networks?
They used serial null modem cables, parallel Laplink cables, or floppy disks. The null modem cable allowed two computers to transfer files using terminal software or dedicated transfer programs. Parallel cables were faster but required special software. Floppy disks were the most common method, but they were slow and had limited capacity.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Microsoft Surface Duo: The Foldable Phone Story
- Samsung SM-T813 Hard Reset: Step-by-Step Guide
- Mafia Clash Codes: Real Meanings & Usage
- Remove Programs from Mac: Full Uninstall Guide
- Project Sentinel Morning Digest: Data Stack Failure Alerts
- Best KVM VPS Hosting: Top Picks & Guide