keepcalculator

06 Numbers and Powers

Format WD Elements for Mac: Step-by-Step Guide

Card No. 06·71599 · Updated · Standard formula, shown below

To format a WD Elements drive for Mac, use Disk Utility to erase it with either APFS (for macOS 10.13 or later) or ExFAT (for compatibility with both Mac and Windows). This guide walks you through the exact steps, explains which file system to choose, and covers common troubleshooting issues.

Why Format a WD Elements for Mac?

Western Digital sells the Elements line as a portable external hard drive. Out of the box, most WD Elements drives are formatted with the NTFS file system, which Windows uses natively. macOS can read NTFS drives but cannot write to them without third-party software. That means you can open files on the drive, but you cannot copy, edit, or delete anything on it. To use the drive fully on a Mac, you must reformat it to a file system macOS can read and write to natively.

Which File System Should You Choose?

Your choice depends on how you plan to use the drive. Here are the main options:

  • APFS (Apple File System) – Best for Mac-only use. It is the default for macOS 10.13 (High Sierra) and later. Supports modern features like snapshots and strong encryption. Not readable by Windows without third-party software.
  • Mac OS Extended (Journaled) – HFS+ – Older Mac format, still works on all macOS versions. Good if you need compatibility with very old Macs (pre-2017). Also not readable by Windows without extra software.
  • ExFAT – Best if you need to use the drive with both Mac and Windows computers. No file size limit (unlike FAT32), and both operating systems read and write to it natively. No journaling, so it is slightly less robust against corruption.
  • FAT32 – Older, compatible with almost everything, but has a 4GB file size limit. Not recommended for modern use.

If you only use the drive with your Mac, APFS is the recommended choice. If you occasionally plug the drive into a Windows PC, choose ExFAT.

How to Format WD Elements Using Disk Utility

Disk Utility is built into macOS and is the standard tool for formatting drives. Here are the steps:

  1. Connect the WD Elements drive to your Mac using the USB cable.
  2. Open Disk Utility. You can find it in Applications > Utilities, or search for it with Spotlight (Cmd+Space).
  3. In the sidebar, select your WD Elements drive. Make sure you select the physical drive, not the volume underneath it (the volume is indented). If you are unsure, look at the drive’s capacity and name.
  4. Click the Erase button in the toolbar.
  5. In the dialog that appears, choose a Name for the drive (e.g., “My Passport”).
  6. Choose a Format from the dropdown – APFS or ExFAT as discussed above.
  7. Choose a Scheme. For a Mac-only drive, select GUID Partition Map. For ExFAT, GUID is also fine, but Master Boot Record (MBR) works if you need compatibility with very old Windows systems.
  8. Click Erase. Wait for the process to finish. It may take a few minutes depending on the drive size.
  9. Click Done when the operation completes.

After formatting, the drive appears on your desktop and in Finder. You can now copy files to it normally.

What About WD Utilities and Drivers?

WD provides its own software for some drives, like WD Discovery or WD Drive Utilities. These are not required for basic formatting. Disk Utility is sufficient. However, if the drive came with a preloaded NTFS driver or software, it may be stored in a separate partition. Formatting the main partition will not remove that hidden partition. If you want to remove it, you can erase the entire disk (not just the volume) and repartition it. Be careful: this deletes all data on the drive, including the WD software.

Common Problems and How to Fix Them

Sometimes formatting doesn’t go smoothly. Here are common issues and solutions:

  • Disk Utility says “Erase process has failed.” – This often happens if the drive is still mounted or in use. Close any open files or apps that might be accessing the drive. Try a different USB port or cable. If it still fails, restart your Mac and try again.
  • The drive doesn’t appear in Disk Utility. – Check the connection. Try a different port. If it’s a bus-powered drive, it may need more power – try a powered USB hub. If the drive still doesn’t show, it may be defective or not receiving enough power.
  • You see a “Read-Only” message when copying files. – This means the drive is still NTFS. You haven’t successfully formatted it. Repeat the formatting steps and make sure you choose APFS or ExFAT.
  • APFS not available in the Format dropdown. – APFS is only available on macOS 10.13 or later. If you’re on an older macOS, use Mac OS Extended (Journaled) instead.
  • Can’t format because the drive is the startup disk. – You cannot erase the boot drive. Make sure you selected the external WD Elements, not your internal drive.

How to Format Using Terminal (Advanced)

If you prefer command line, you can use diskutil in Terminal. This is faster for some users. First, identify the disk identifier with diskutil list. Then unmount it and erase it. For example, to format as APFS:

  1. Open Terminal (Applications > Utilities).
  2. Run diskutil list to find the identifier for your WD Elements (e.g., disk2).
  3. Run diskutil unmountDisk /dev/disk2 (replace disk2 with your identifier).
  4. Run diskutil eraseDisk APFS "My Drive" GUID /dev/disk2.

For ExFAT, replace APFS with ExFAT. Be extremely careful to use the correct disk identifier – erasing the wrong disk will destroy data.

Does Formatting Affect the Drive’s Performance?

Formatting itself does not change the physical performance of the drive. The file system can affect throughput slightly. APFS is optimized for SSDs, but it works fine on mechanical hard drives like WD Elements. ExFAT has slightly more overhead than APFS, but in practice, you won’t notice a difference for typical file transfers. The drive’s speed is limited by its USB interface (usually USB 3.0) and the rotational speed (5400 RPM for most Elements drives).

Frequently Asked Questions

Will formatting erase all data on my WD Elements?

Yes, formatting permanently deletes all data on the drive. Back up any files you need before proceeding. There is no way to recover data after a full format, so double-check that you have copies of everything important.

Can I use the WD Elements with both Mac and Windows after formatting?

Yes, if you choose ExFAT. ExFAT is supported natively by both macOS and Windows. APFS and HFS+ are not natively readable by Windows, so you would need third-party software like Paragon APFS or MacDrive to access them on a PC.

Why is my WD Elements not showing up on my Mac?

First, check the physical connection – try a different USB port or cable. If it still doesn’t appear, open Disk Utility. If it shows there, the drive may just not be mounted. Select it and click the Mount button. If it doesn’t show at all, the drive might be defective or not receiving enough power. Try a powered USB hub.

Is it safe to unplug my WD Elements without ejecting?

No, you should always eject the drive before unplugging it. Click the eject icon next to the drive in Finder, or drag it to the Trash. This ensures all writes are flushed and prevents data corruption. Sudden removal can also damage the file system.

Can I format WD Elements on a Windows PC and then use it on Mac?

Yes, you can format it as ExFAT on Windows (using the format command or Disk Management), and it will work on Mac. However, it’s often easier to format on the Mac using Disk Utility, as described above.

What is the difference between APFS and Mac OS Extended?

APFS is the modern file system introduced in 2017. It supports snapshots, cloning, and strong encryption, and is optimized for SSDs. Mac OS Extended (HFS+) is the older format. If you are running macOS 10.13 or later, APFS is the recommended choice. If you need compatibility with older Macs (pre-2017), use HFS+.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →