keepcalculator

06 Numbers and Powers

Ping & Server Choice: How Latency Shapes Hosting

Card No. 06·71672 · Updated · Standard formula, shown below

Your ping to a game server determines how responsive your actions feel, and it should be the first factor you check when choosing a hosting provider or a specific server location. Ping, measured in milliseconds (ms), is the round-trip time for data to travel from your computer to the server and back; lower ping means less delay between your input and the game reacting. While a high-speed internet connection and a powerful PC matter, ping is the one metric that directly ties your physical location to the server’s location, and it can make the difference between landing a shot and dying behind a wall.

What Ping Actually Measures

Ping is not a measure of your internet speed in the sense of bandwidth (how much data you can download). It is a measure of latency, or delay. When you press a key or click a mouse, your computer sends a small packet of data to the game server. The server processes that action and sends back a response, which your client renders on screen. The ping value is the time for that entire round trip, usually measured in milliseconds.

A few components contribute to that round-trip time:

  • Physical distance: Light and electrical signals travel at a finite speed through fiber optic cables. The longer the cable path, the higher the minimum possible latency. Even at the speed of light, a signal crossing the United States takes about 40 ms one way, so a round trip is at least 80 ms.
  • Network routing: Your data does not travel in a straight line. It hops through multiple routers and switches owned by different internet service providers (ISPs). Each hop adds a small delay, and congestion at any hop can add jitter (variance in latency).
  • Server processing time: The server itself takes a few milliseconds to receive, process, and respond to your packet. Overloaded servers or servers running complex simulation logic can add delay.
  • Your local network: Your home router, Wi-Fi connection, and even your computer’s network stack add a small amount of latency. Wi-Fi is typically 1-5 ms slower than a wired connection, but interference can cause spikes.

In practice, a ping of 20 ms feels instant, 50 ms is good for most games, 100 ms is noticeable in fast-paced shooters, and 150 ms or higher makes many games feel sluggish or unplayable.

Why Ping Matters More Than Bandwidth

Bandwidth is the amount of data you can transfer per second, often advertised as 100 Mbps or 1 Gbps. Online gaming uses very little bandwidth—typically less than 1 Mbps for most games, even with voice chat. The problem is not capacity; it is delay. A 100 Mbps connection with a 100 ms ping will feel worse than a 10 Mbps connection with a 20 ms ping.

Consider a competitive first-person shooter (FPS) like Counter-Strike or Valorant. You see an enemy, you click, and your client sends a “shot” packet. The server, which is authoritative, must validate that shot based on your position and the enemy’s position at the time. If your ping is high, your client is seeing a slightly outdated world state. By the time your shot packet arrives, the enemy may have moved behind cover, and the server will reject the hit. This is why high ping players often experience “dying behind walls”—on their screen they were safe, but on the server they were already exposed.

Latency also affects movement and aiming. With a 200 ms ping, every input you make is delayed by a fifth of a second. In a game where a headshot takes 100 ms, you are effectively playing in the past. In genres like real-time strategy (RTS) or MOBA (League of Legends, Dota 2), high ping causes delayed ability casts and missed last-hits. Even in slower games like MMORPGs, a high ping makes the game feel unresponsive and frustrating.

How to Measure Your Ping to a Server

Before choosing a server location, you should measure your ping to several candidate locations. The most accurate method is to use the game’s built-in server browser or the hosting provider’s test IPs. Most providers list a test IP or a “ping test” tool on their website. You can also use the command line:

  1. Windows: Open Command Prompt (cmd), type ping [server IP], and press Enter. For example, ping 8.8.8.8 pings Google’s DNS server. The output shows the round-trip time in milliseconds.
  2. macOS/Linux: Open Terminal and type ping [server IP]. Press Ctrl+C to stop after a few packets.
  3. Online tools: Websites like ping.pe or cloudping.co let you ping multiple locations from a single test, but they measure from their own servers, not yours. The most reliable test is from your own computer to the actual server IP.

When you run a ping, look not only at the average time but also at the consistency. A ping that jumps from 20 ms to 150 ms (jitter) is worse than a stable 60 ms. Jitter causes stuttering and rubber-banding because the game’s interpolation algorithm struggles to predict your position.

How to Choose a Server Location

The general rule is simple: pick the server location that gives you the lowest stable ping. However, you also need to consider where your teammates or opponents are, because the game’s tick rate and server location affect everyone. If you play with friends on the opposite coast, a central server may be a good compromise, even if it is not the lowest ping for any one player.

For a dedicated game server (for example, a Minecraft server or a private ARK server), the hosting provider’s data center location matters. Providers often have multiple regions: North America (East, Central, West), Europe (EU West, EU East), Asia, etc. Choose the region closest to the majority of your players. If you are in the UK, an EU West server might give you 30 ms, while an EU East server might give you 60 ms. If you have players in both Europe and the US, you may need to accept a higher ping for some players or run two servers.

Some providers offer “anycast” or “global” IPs that route to the nearest data center, but for gaming, a fixed location is usually better because it is predictable. Also note that “closest” in terms of geography is not always the fastest due to internet backbone routing. For example, a player in New York may get a lower ping to a server in Virginia than to one in New Jersey because of how ISPs peer.

Common Misconceptions About Ping

One common belief is that a faster internet plan will lower your ping. It will not, unless your current plan is so slow that it causes bufferbloat (excessive queuing delay on your router). Upgrading from 50 Mbps to 500 Mbps does not reduce the physical distance your data travels. Another misconception is that a VPN always increases ping. A good VPN with optimized routing can sometimes lower ping by avoiding congested paths, but it usually adds overhead. Use a gaming VPN only if you test it and see a genuine improvement.

Another myth is that ping is the only factor. Packet loss is equally important. Packet loss means some of your data never arrives, forcing the game to resend it, which causes teleporting and hit registration issues. You can test packet loss with ping -n 100 [IP] on Windows (or ping -c 100 on Linux) and look for “Request timed out” messages. A loss of even 1-2% can be noticeable.

How Hosting Providers Handle Latency

When you rent a game server, the provider’s infrastructure affects your ping beyond the data center location. Key factors include:

  • Network quality: Providers with premium networks (e.g., using high-tier transit providers) often have better peering and less congestion. Cheap providers may use oversubscribed networks, causing latency spikes during peak hours.
  • Hardware: A server with a slow CPU or insufficient RAM can add processing delay, especially with many players or complex mods. Look for providers that specify the CPU model (e.g., Ryzen 9 or Xeon) and guarantee a certain amount of dedicated CPU.
  • DDoS protection: If a server is under attack, it may drop packets or route traffic through scrubbing centers, which can increase ping. Good providers filter attacks without adding noticeable latency.
  • Server location vs. IP location: Some providers use virtual locations or proxy IPs, so the server may actually be in a different city than advertised. Always ask for the actual data center address or run a traceroute to verify.

For cloud hosting (AWS, Google Cloud, etc.), you can choose the exact region, but you must configure the networking yourself. Game server panels like Pterodactyl or AMP can simplify this, but the latency is still determined by the region you select.

What Ping is Playable? A Rough Guide

There is no universal threshold, but here is a general guide based on game genre:

  • 0-20 ms: Excellent. Ideal for competitive FPS and fighting games.
  • 20-50 ms: Good. Most players won’t notice a difference. Suitable for all genres.
  • 50-100 ms: Playable, but in fast-paced games you may occasionally lose trades. Acceptable for casual play.
  • 100-150 ms: Noticeable delay. FPS and MOBA become frustrating. Playable for MMOs, strategy, and co-op games.
  • 150+ ms: Severe delay. Most games become difficult. Only acceptable for turn-based games or if the game has lag compensation that works well.

Remember that these are general guidelines. Some games have better netcode (e.g., fighting games with rollback netcode) that masks latency, while others are more sensitive. Also, your ping to a server can vary over time due to internet congestion, so test at different times of day.

Frequently Asked Questions

Does a higher ping always mean worse performance?

Not always. A stable 80 ms can feel better than a jittery 40 ms that spikes to 200 ms. Consistency matters more than the average. If your ping is stable, the game’s interpolation can predict movement accurately. If it varies wildly, you’ll experience rubber-banding.

Can I lower my ping without changing servers?

Yes, several steps can help: use a wired Ethernet connection instead of Wi-Fi, close bandwidth-heavy applications (streaming, downloads), enable QoS (Quality of Service) on your router to prioritize game traffic, and ensure your router’s firmware is up to date. A VPN with optimized gaming routes may help in some cases, but test it.

Why is my ping to a nearby server high?

Possible reasons include: your ISP’s routing is inefficient (e.g., traffic goes through a distant hub), the server is actually located elsewhere (check with a traceroute), your local network is congested, or the server is under load. Run a traceroute to see where the delay occurs.

What is the difference between ping and FPS?

Ping measures network latency (delay to the server), while FPS (frames per second) measures how quickly your computer renders frames. Low FPS makes the game look choppy, but your inputs are still sent immediately. High ping delays your inputs reaching the server. Both affect gameplay, but they are independent. You can have high FPS and high ping, or low FPS and low ping.

Should I choose a server with lower ping or one with more players?

It depends on the game. For competitive games, lower ping is usually more important. For social games like MMORPGs, playing with friends or a populated server may be worth a slightly higher ping. A good compromise is to find a server with a ping under 100 ms and an active community.

How does the server’s tick rate affect latency?

Tick rate is how many times per second the server updates the game state (e.g., 64 Hz = 64 updates per second). A higher tick rate means more precise hit registration and smoother movement, but it also requires more bandwidth and CPU. Tick rate does not directly change your ping, but a low tick rate can make the game feel less responsive even with low ping.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →