keepcalculator

06 Numbers and Powers

OpenClaw Client Isolation: Separate Gateway Guide

Card No. 06·80004 · Updated · Standard formula, shown below

This guide explains how to give every OpenClaw client its own dedicated gateway for production isolation, and it covers the architecture, configuration steps, and operational considerations you need to do it safely. You will learn when separate gateways are necessary, how to set them up, and how to avoid common pitfalls.

Why Separate Gateways Matter in Production

OpenClaw is a multi-agent orchestration framework where clients connect to a central gateway to route requests, manage sessions, and interact with external APIs. In a production environment, sharing a single gateway across all clients creates a single point of failure and a shared attack surface. If one client triggers a memory leak, a malicious request, or a rate-limit storm, every other client is affected. Giving each client its own gateway provides:

  • Fault isolation – a crash in one gateway doesn’t take down others.
  • Security boundaries – each client’s credentials and API keys are scoped to its own gateway, reducing blast radius.
  • Resource control – you can allocate CPU/memory limits per client, preventing noisy neighbors.
  • Independent scaling – high-traffic clients can get more gateway replicas without affecting others.

How OpenClaw Gateway Architecture Works

OpenClaw’s gateway is the entry point for client connections. It handles authentication, rate limiting, and message routing to backend agents or models. By default, you might run one gateway that accepts connections from many clients, each with its own API key. In that shared model, the gateway is a single process or container that must be highly available and carefully secured.

To isolate clients, you run multiple gateway instances, each configured to accept only one client’s credentials. This can be done by:

  • Running separate gateway containers or VMs per client.
  • Using a reverse proxy that routes each client to its own gateway backend.
  • Using Kubernetes namespaces or separate deployments per client.

The key is that each gateway has its own configuration file, its own secrets, and its own network endpoints.

Step-by-Step Setup Guide

Here is a general approach to setting up separate gateways for each OpenClaw client:

  1. Create a gateway configuration template – include the base settings (model endpoints, logging, etc.) and placeholders for client-specific values.
  2. For each client, create a configuration file – set the client ID, API keys, and any client-specific model preferences.
  3. Provision a separate gateway instance – either as a container, systemd service, or VM, pointing to that client’s configuration.
  4. Expose each gateway on a distinct endpoint – use different ports or subdomains, and set up TLS certificates accordingly.
  5. Update the client’s connection settings – each client should connect to its own gateway URL instead of a shared one.
  6. Monitor each gateway independently – set up separate health checks, logs, and alerts per instance.

If you use Docker, you might run something like docker run -v /path/to/client1.yaml:/etc/openclaw/config.yaml openclaw/gateway for each client.

Choosing Between Separate Gateways and Shared with Isolation

Separate gateways are not always the best choice. Consider the trade-offs:

  • Number of clients – if you have dozens or hundreds, running a gateway per client can become expensive and operationally heavy. In that case, a shared gateway with strong tenant isolation (e.g., separate namespaces, rate limits, and resource quotas) might be more practical.
  • Compliance requirements – if clients have strict data residency or security needs, separate gateways make it easier to enforce boundaries.
  • Traffic patterns – if one client is extremely active, a dedicated gateway prevents it from starving others.
  • Operational maturity – separate gateways require more automation to manage. If you have a good CI/CD pipeline, it’s manageable; otherwise, a shared gateway might be simpler.

Common Problems and How to Avoid Them

When running separate gateways, people often run into these issues:

  • Configuration drift – each gateway’s config can diverge over time. Use a central config management tool or a Docker image with baked-in configs to keep them consistent.
  • Port exhaustion – if you expose each gateway on a unique port, you may run out of ports or make firewall management complex. Use subdomains with a reverse proxy instead.
  • Resource underutilization – many small gateways may waste memory. Monitor actual usage and adjust the per-gateway memory estimate.
  • Secret management – storing client API keys in each config file can be risky. Use a secrets manager (like HashiCorp Vault or Kubernetes Secrets) to inject credentials at runtime.
  • Log aggregation – with multiple gateways, logs become scattered. Set up centralized logging (e.g., ELK stack) to keep visibility.

Cost and Resource Considerations

Running separate gateways increases infrastructure costs. Each gateway consumes CPU, memory, and possibly storage.

  • Network overhead – each gateway may have its own public IP or load balancer, which can add to cloud bills.
  • Operational time – more instances mean more time for updates, patching, and monitoring.
  • High availability – if you need redundancy per client, you might run 2+ gateways per client, doubling the cost.

For a small number of clients (under 10), the cost is usually acceptable. For large fleets, consider a shared gateway with robust isolation features instead.

Security Best Practices

Isolation is only as strong as your security practices. Follow these guidelines:

  • Use network policies to restrict each gateway to only the client’s IP range or service account.
  • Rotate client API keys regularly and store them in a secrets manager.
  • Enable TLS for all gateway endpoints; use mutual TLS if possible.
  • Set resource limits (CPU, memory) on each gateway container to prevent a runaway process from affecting the host.
  • Audit access to gateway configuration files – only authorized admins should modify them.

Alternatives to Per-Client Gateways

If separate gateways feel too heavy, consider these alternatives:

  • Shared gateway with tenant isolation – OpenClaw may support multi-tenancy features like per-client rate limits and separate session namespaces. Check the official docs for what’s available.
  • Gateway per environment – instead of per client, run separate gateways for dev, staging, and production. This is a middle ground.
  • Sidecar proxies – if you’re on Kubernetes, you could run a shared gateway with a sidecar that enforces per-client policy.

These options reduce cost but may not provide the same level of fault isolation.

Frequently Asked Questions

Does every OpenClaw client really need its own gateway?

Not always. The need depends on your security and reliability requirements. If you have a few clients and can tolerate a shared failure domain, a single gateway is simpler. But for production with strict SLAs or sensitive data, separate gateways are a best practice.

Can I run multiple gateways on the same machine?

Yes, you can run multiple gateway processes or containers on one host, as long as they use different ports and have sufficient resources. However, this reduces fault isolation – a host failure takes down all gateways on it.

How do I route a client to its own gateway?

Each client should be configured with its own gateway URL. If you use a reverse proxy, you can map subdomains like client1.example.com to the corresponding gateway backend.

What happens if a gateway goes down?

Only the client connected to that gateway is affected. That client will experience downtime until the gateway is restored. This is the main benefit of isolation.

How much memory does each gateway need?

It varies, but a baseline of 0.5 GB per gateway is a reasonable starting point. Monitor actual usage and adjust. Heavy traffic or large model contexts may require more.

Is there a way to automate the creation of per-client gateways?

Yes, you can use infrastructure-as-code tools like Terraform, Ansible, or Kubernetes Operators to generate gateway deployments from a client list. This reduces manual effort and ensures consistency.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →