keepcalculator

06 Numbers and Powers

Gemini Pro Removed from AI Plus?

Card No. 06·84767 · Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered
You enter
Finish time, Distance
You get
Average pace, Average speed
Rounding
2 dp

No, Google has not removed Gemini Pro from its AI Plus (Google AI Pro) subscription. As of now, the Google AI Pro plan still includes access to Gemini Pro models, along with other premium AI features. This article explains what the Google AI Pro plan actually includes, how Gemini Pro fits into it, and what to do if you see a change in your account.

Formula

The calculator above works out your average pace and speed for a run, ride, or walk. The formulas are simple:

  • Pace = Finish time (minutes) ÷ Distance (km) → gives you minutes per kilometre.
  • Speed = Distance (km) ÷ (Finish time (minutes) ÷ 60) → gives you kilometres per hour.

Where:

  • Finish time (t) is the total time taken, in minutes.
  • Distance (d) is the total distance covered, in kilometres.

The pace is the number of minutes it takes you to cover one kilometre. The speed is how many kilometres you cover in one hour.

Worked Example

Using the default values from the calculator:

  • Finish time = 50 minutes
  • Distance = 10 km

Step 1: Calculate pace: 50 ÷ 10 = 5.00 min/km.

Step 2: Calculate speed: 10 ÷ (50 ÷ 60) = 10 ÷ 0.8333 = 12.00 km/h.

So with a 50‑minute time for 10 km, your average pace is 5:00 per kilometre and your average speed is 12 km/h.

When to Use This Calculator

Use this tool any time you want to know your average pace or speed from a single effort. It works for running, cycling, walking, or hiking. You might use it:

  • After a training run to see if you hit your target pace.
  • To plan a race: if you want to finish a 10 km in 45 minutes, what pace do you need? Enter 45 and 10 to find out.
  • To compare two different workouts that were different distances and times.

Note that this gives you the average pace, not your splits or the effect of hills or stops. If you ran the first half faster than the second, the average still tells you the overall speed.

How to Read the Result

The pace result is shown in minutes per kilometre (min/km). A lower number means you are moving faster. For example, 4:30 min/km is faster than 6:00 min/km. The speed result is in kilometres per hour (km/h); a higher number is faster.

If you use miles, you can still use the calculator by entering distance in miles and time in minutes – the pace will be in minutes per mile, and the speed in miles per hour. Just be careful not to mix units: if you enter distance in miles but want km/h, you will get a wrong answer.

Common Mistakes

  • Mixing units: Entering distance in miles but expecting min/km, or entering time in hours instead of minutes. Always convert time to minutes first.
  • Using seconds: If you have a time like 1:15:30 (1 hour, 15 min, 30 sec), convert to total minutes: 60 + 15 + 30/60 = 75.5 minutes.
  • Rounding too early: If you round the pace to one decimal before using it in the speed formula, you may get a slightly different speed. The calculator does the full calculation internally.

Limitations of the Formula

This is a simple average calculation. It does not account for:

  • Elevation gain or loss – a hilly route will feel harder than a flat one at the same pace.
  • Stops or pauses – if you stopped for a traffic light, the average pace will be slower than your moving pace.
  • Wind or weather – these affect effort but not the mathematical average.

For race planning, remember that you cannot hold your exact average pace for the whole race if you start too fast. Most runners use a slightly negative split (running the second half a bit faster) for best results.

Frequently Asked Questions

How do I convert min/km to min/mile?

Multiply the min/km value by 1.609. For example, 5:00 min/km × 1.609 = 8:03 min/mile. Conversely, divide min/mile by 1.609 to get min/km.

What is a good running pace for a beginner?

There is no single “good” pace – it depends on age, fitness, and experience. A common conversational pace for a beginner is around 6:30–8:00 min/km (10:30–12:50 min/mile). The best pace is one you can sustain while still breathing comfortably.

Can I use this for cycling?

Yes. Enter your total ride time and distance, and you’ll get your average speed. For cycling, pace in min/km is less common, but the speed value is very useful.

Why does my GPS watch show a different pace?

GPS watches often show “current pace” (instantaneous) or “moving pace” (excluding stops). This calculator gives you the overall average including all time. If you stopped for a break, your watch’s moving pace will be faster than the result here.

How do I calculate pace for a marathon?

Marathon distance is 42.195 km. If you want to finish in 4 hours (240 minutes), enter 240 and 42.195 – you’ll get a pace of 5:41 min/km. That’s the pace you need to hold.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0 | 100000
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →