keepcalculator

06 Numbers and Powers

Nokia Phone Turned Into Smartwatch? The Real Story

Card No. 06·74830 · Updated · Standard formula, shown below

Yes, someone turned an old Nokia phone into a smartwatch, but it was a one-off DIY project, not a commercial product. The build used a Nokia 3310 (the 2017 re-release) stripped down to its core board, paired with a small round display and a custom 3D-printed case. This article explains how that hack was done, what parts were involved, and why you probably shouldn’t try it yourself—unless you really enjoy soldering.

Background: The Nokia 3310 and the Smartwatch Hack

The Nokia 3310 is one of the best-selling phones ever, with over 126 million units sold. Its 2017 re-release brought back the iconic design with a modern color screen and a basic smartwatch-like OS. That version is the one used in the hack, because its internals are surprisingly compact: a small PCB, a 2.4-inch QVGA display, and a 1200 mAh battery. The original 2000 model is too bulky and runs on an ancient OS that can’t do much beyond calls and SMS.

The project was shared on Hackaday and Reddit around 2018. The creator, a hardware hobbyist, wanted to see if he could fit a working phone on his wrist. He succeeded, but the result was thick, heavy, and had terrible battery life—about a day of standby. It wasn’t a practical smartwatch; it was a proof of concept.

How the Hack Works: From Phone to Wrist

The core trick is to separate the phone’s mainboard from its original case and screen, then rewire it to a smaller display and a custom battery. Here’s the general process:

  • Disassembly: Open the Nokia 3310 (2017) and remove the motherboard, screen, battery, and all connectors.
  • Display swap: The original 2.4-inch screen is replaced with a 1.3-inch round LCD (often from a smartwatch repair kit) that connects via SPI or I2C. This requires writing a custom driver, because the phone’s firmware expects a specific display controller.
  • Battery: The original 1200 mAh battery is swapped for a smaller 300–500 mAh LiPo cell, which means you lose most of your talk time.
  • Enclosure: A 3D-printed case holds the board, screen, and battery. The case is usually printed in two halves that snap together.
  • Firmware: The phone’s stock OS (a fork of Mocor) still runs, but you can’t easily change it. You’re stuck with the original UI, which is not designed for a round screen, so parts of the interface get cut off.

The result is a wearable that can make calls (with a Bluetooth headset), send texts, and show the time—but it’s clunky and fragile.

What You Need to Replicate It

If you’re determined to build one, here’s the shopping list:

  • Nokia 3310 (2017) – used or new old stock
  • 1.3-inch round TFT display (e.g., GC9A01 or ST7789)
  • 300–500 mAh LiPo battery with protection circuit
  • 3D printer (or a friend with one) for the case
  • Soldering iron, fine tip, and flux
  • USB-UART adapter for flashing firmware (if you want to modify anything)
  • Patience and a magnifying glass

You’ll also need to know how to read a schematic and write basic C code, because you’ll likely have to adjust the display initialization sequence.

Common Problems and How to Avoid Them

The most frequent issues people hit:

  • Display not initializing: The phone’s firmware sends commands to the original display controller. You must map those to your new screen’s controller. If you skip this, you get a blank screen.
  • Battery swelling: Using a LiPo without a protection circuit can cause swelling or even fire. Always use a protected cell and a proper charging IC.
  • Short battery life: The phone’s radio (GSM) draws a lot of power. Expect less than a day of standby. You can disable the cellular radio and use it as a Bluetooth watch, but then it’s not really a phone.
  • Broken antenna: The original antenna is part of the case. If you remove it, you lose signal. You need to solder a small wire antenna, which is tricky to tune.

If you’re not comfortable with surface-mount soldering, this project is not for you. The motherboard has tiny components that are easy to bridge.

Comparisons: Nokia Watch Hack vs. Real Smartwatches

How does the hacked Nokia compare to a modern smartwatch like a Galaxy Watch or Apple Watch?

  • Battery life: The Nokia hack gets maybe 1 day; modern smartwatches get 1–2 days (or 7+ for Garmin).
  • Apps: The Nokia runs only the stock apps—no WhatsApp, no Spotify, no maps.
  • Display: The round screen is low-res (240×240) and not touch-sensitive; you navigate with the physical buttons.
  • Connectivity: The Nokia has 2G only. In many countries, 2G networks are being shut down, so it won’t work at all.
  • Cost: The parts cost around $50–80, but your time is worth a lot more. A used smartwatch can be had for $100–200.

The only advantage of the Nokia hack is the novelty factor—you can say you made it yourself.

Safety and Legal Considerations

Before you start, consider these points:

  • Battery safety: Use a LiPo with a built-in protection circuit. Charge it with a dedicated charger, not a random USB cable. Never leave it unattended while charging.
  • Radio emissions: A 2G phone emits up to 2W of power. Wearing it on your wrist for hours is not ideal, though there’s no proven harm. Still, you might want to keep calls short.
  • 2G shutdown: Many carriers have already decommissioned 2G. Check if your network still supports it. If not, the phone is just a fancy clock.
  • FCC/CE: Modifying a phone’s antenna can make it operate outside legal limits. You’re not likely to get caught, but it’s technically a violation.

Don’t expect to use this as your daily driver. It’s a weekend project for learning, not a practical device.

Alternatives: If You Want a Retro Smartwatch

If you like the idea but don’t want to solder, consider these options:

  • Buy a used Nokia 3310 (2017) and wear it on your wrist with a strap holder – You can find 3D-printed clips that hold the phone to your arm. It’s bulky but works.
  • Use a smartwatch with a retro watchface – Many Wear OS and Garmin watches have pixel-art watchfaces that mimic the Nokia look.
  • Build a smartwatch from a Raspberry Pi Zero W – There are open-source projects like the “Pi Watch” that give you a real smartwatch OS, but you’ll still need to design a case.
  • Buy a dedicated “dumb” watch – Casio’s classic watches are durable and last years on a battery, though they don’t make calls.

None of these will give you the exact experience of a hacked Nokia, but they’re all more practical.

Frequently Asked Questions

Can I use the original Nokia 3310 (2000) instead?

No. The 2000 model has a much larger board, a monochrome screen, and a proprietary OS that can’t be easily repurposed. The 2017 re-release is the only one that’s compact enough.

Does the hacked Nokia still make calls?

Yes, if you have a 2G network and a Bluetooth headset, because the phone itself has no speaker or mic on the wrist. The call quality is poor, and the battery drains fast.

How long did the original hack take?

The creator reported about 20 hours of work, including designing the case and debugging the display driver. If you’re new to this, expect double that.

Is this legal?

Modifying a phone for personal use is generally legal, but using it on a network might violate your carrier’s terms. Also, if you sell it, you could run into regulatory issues because it’s not certified.

Can I install Android on it?

No. The Nokia 3310 (2017) runs a proprietary OS (Mocor) that is not Android. There is no custom ROM for it, so you’re stuck with the stock firmware.

What if I brick it?

You might be able to recover it by flashing the original firmware via a USB-UART adapter, but if you damage the board, it’s dead. Buy two phones if you’re serious.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →