keepcalculator

06 Numbers and Powers

Hard Reset Samsung J500F Galaxy J5: Full Guide

Card No. 06·75003 · Updated · Standard formula, shown below

To hard reset a Samsung Galaxy J5 (model SM-J500F), turn off the phone, then press and hold Volume Up, Home, and Power buttons together until the Android logo appears, then release and select “wipe data/factory reset” from the recovery menu. This erases all personal data and restores the device to its original factory state. This guide explains the two reset methods, what to do before resetting, and how to recover from common issues.

Why You Might Need a Hard Reset

A hard reset (also called a factory reset or master reset) is the most thorough way to restore a phone to its original software state. It removes all user data, installed apps, settings, and accounts, leaving the device as it was when it left the factory. Common reasons to perform a hard reset include:

  • Forgotten screen lock PIN, password, or pattern
  • Persistent lag, freezing, or app crashes that don’t improve with normal troubleshooting
  • Preparing the phone for sale or transfer to a new owner
  • Removing malware or stubborn bloatware
  • Fixing boot loops (phone stuck on the Samsung logo)
  • Clearing corrupted system files after a failed software update

Before You Reset: Backup and Precautions

A hard reset permanently deletes everything on the phone’s internal storage. Photos, videos, contacts, messages, app data, and downloaded files will be gone. To avoid losing important data, back up your phone before proceeding. Samsung provides Smart Switch for PC or Mac, and you can also sync contacts and photos to your Google account. If you use Samsung Cloud, ensure your data is synced. Also, remove your Google account and Samsung account from the phone if possible, because after a reset, the phone may ask for the last account’s credentials (Factory Reset Protection, FRP). If you forget the Google account password, you may be locked out of the device.

Method 1: Hard Reset via Recovery Mode (When Phone is Off or Unresponsive)

This method works even if the phone won’t boot normally, as long as the hardware buttons function. It is the standard way to reset a J5 when the screen is locked or the system is stuck.

  1. Turn off the phone completely. If it’s frozen, press and hold the Power button for about 10 seconds until it shuts down.
  2. Press and hold the Volume Up, Home, and Power buttons simultaneously.
  3. Keep holding them until the Samsung logo appears, then release only the Power button but keep holding the other two until the Android recovery menu appears. This can take 10-20 seconds.
  4. Use the Volume Down button to navigate to “wipe data/factory reset”.
  5. Press the Power button to select it.
  6. Use Volume Down to highlight “Yes – delete all user data” and confirm with Power.
  7. Wait for the reset to complete. Then select “reboot system now” with the Power button.

The phone will restart and may take several minutes on the first boot. It will then show the initial setup screen, as if it were new.

Method 2: Factory Reset from Settings (When Phone is Working)

If your phone boots and you can access the settings, a reset from the system is simpler and does not require hardware button combinations. This method is also safer because it clearly warns you about data loss.

  1. Open the Settings app (gear icon).
  2. Scroll down and tap “Backup and reset” (on some versions it’s “General Management” then “Reset”).
  3. Tap “Factory data reset”.
  4. Scroll down and tap “Reset device”.
  5. If prompted, enter your PIN, password, or pattern.
  6. Tap “Delete all” to confirm.

The phone will restart and perform the reset. It will then boot to the setup wizard.

What Happens After the Reset? (FRP and Setup)

After a hard reset, the phone will ask you to configure it like a new device: choose language, connect to Wi-Fi, sign in to a Google account, and set up a screen lock. If the phone still has a Google account linked from before the reset, it will ask for that account’s password. This is Factory Reset Protection (FRP), a security feature to prevent thieves from using a stolen phone. If you remember the password, you can proceed. If you don’t, you will be stuck at the Google verification screen. To avoid this, always remove your Google account from the phone before resetting. If you are selling the phone, the new owner will need your account credentials to set it up, so it’s best to log out of all accounts and perform the reset yourself.

Common Problems and How to Fix Them

  • Phone won’t enter recovery mode: Make sure the battery is charged (at least 30%). If the button combination doesn’t work, try Volume Down + Home + Power instead (some variants use different keys). If that fails, connect the phone to a charger or PC and try again.
  • Stuck in a boot loop after reset: This can happen if the reset was interrupted or if the firmware is corrupted. Try wiping the cache partition first (from recovery mode), then perform the factory reset again. If the problem persists, you may need to reinstall the official firmware using Odin (a PC tool) – a more advanced procedure.
  • Phone asks for a Google account password you don’t know: This is FRP. You must provide the correct credentials. There is no legitimate bypass for this security feature. If you bought the phone second-hand, contact the previous owner for the account details.
  • Data loss: If you forgot to back up, there is no official way to recover data after a factory reset. Third-party recovery tools exist but are unreliable and often require root access. Prevention is the only sure solution.

Hard Reset vs. Soft Reset vs. Factory Reset

People often mix up these terms. A soft reset is simply restarting the phone (pressing and holding Power and selecting Restart). It doesn’t delete any data. A hard reset and factory reset are essentially the same thing – they erase all data and restore the phone to factory condition. The only difference is the method: hard reset usually refers to using the hardware keys (recovery mode), while factory reset is the term used in the Settings menu. Both have the same result.

Frequently Asked Questions

Will a hard reset remove the screen lock (PIN/pattern)?

Yes, a hard reset will remove the screen lock you set up, because it erases all user data including the lock settings. However, after the reset, the phone will ask you to set up a new lock. Also, if the phone has FRP enabled, you will still need to enter the Google account credentials that were previously linked to the device.

How long does a hard reset take on a Galaxy J5?

The reset process itself takes about 1-2 minutes. The first boot after the reset can take 5-10 minutes because the phone is rebuilding system caches. If it takes longer than 15 minutes, the reset may have failed, and you should try again or reinstall the firmware.

Can I hard reset a Galaxy J5 without the Home button?

The Galaxy J5 has a physical Home button, so the standard combination includes it. If the Home button is broken, you can still reset from Settings if the phone boots. If the phone doesn’t boot and the Home button is broken, you may need to use ADB (Android Debug Bridge) from a PC, which requires USB debugging to have been enabled before the problem occurred.

Will a hard reset remove malware?

In most cases, yes. A factory reset removes all installed apps and their data, including any malware that was installed as an app. However, some sophisticated malware can hide in the system partition, but that is rare and usually only possible if the phone is rooted. If you suspect such malware, you should reinstall the official firmware from scratch.

Does a hard reset improve battery life?

It can, indirectly. If the battery drain is caused by a rogue app, corrupted system files, or settings that have been misconfigured, a reset will clear those issues. However, if the battery is old or physically degraded, a reset won’t fix it. After a reset, you’ll start with a clean slate, and you can monitor which apps are using the most power.

What should I do if the phone is stuck on the Samsung logo after reset?

This is a boot loop, often caused by a failed reset or corrupted firmware. Try wiping the cache partition from recovery mode first. If that doesn’t work, perform another factory reset from recovery. If the problem persists, you’ll need to flash the official stock firmware using Odin on a PC. This is a more advanced process, and you should find a reliable guide specific to the J500F model.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →