keepcalculator

06 Numbers and Powers

Hard Reset Samsung SM-G900F: Full Guide

Card No. 06·73566 · Updated · Standard formula, shown below

To hard reset a Samsung Galaxy S5 (model SM-G900F), you can use the hardware key method: turn off the phone, press and hold Volume Up, Home, and Power together, then select “wipe data/factory reset” from the recovery menu. This erases all personal data and restores the device to its original factory state, which is useful for fixing software issues, removing forgotten locks, or preparing the phone for resale.

What the SM-G900F Is

The SM-G900F is the international unlocked variant of the Samsung Galaxy S5, released in 2014. It runs Android (originally 4.4.2 KitKat, upgradable to 6.0.1 Marshmallow) and uses a Qualcomm Snapdragon 801 processor. Unlike carrier-specific versions, the F model generally has an unlocked bootloader and is popular among users who want to install custom ROMs or use the phone on different networks. Knowing your exact model matters because the reset method is the same across most Galaxy S5 variants, but the SM-G900F specifically appears in many older guides due to its widespread use.

Why You Might Need a Hard Reset

A hard reset (also called a factory reset or master reset) is the software equivalent of erasing a hard drive and reinstalling the operating system. Common reasons include:

  • **Forgotten screen lock** – If you forget your PIN, password, or pattern, a hard reset removes it, but also wipes all data.
  • **Persistent crashes or freezes** – When the phone becomes unresponsive or apps crash repeatedly, a reset often fixes the underlying software corruption.
  • **Malware or bloatware** – If you suspect a virus or unwanted apps that you cannot uninstall, a reset clears them.
  • **Preparing for resale** – You want to erase all personal information before giving or selling the phone.
  • **Software update failures** – After a failed Android update, the phone may be stuck in a boot loop; a reset can help it boot again.

Before you proceed, understand that a hard reset permanently deletes everything on the internal storage: contacts, photos, messages, apps, and settings. It does not remove files on an external SD card, but removing the card during the reset is safer to avoid accidental formatting.

Before You Reset: Backup and Precautions

Backing up is not optional if you want to keep your data. The SM-G900F supports several backup methods:

  • **Samsung Cloud** – Go to Settings > Cloud and accounts > Samsung Cloud and back up data such as contacts and calendar.
  • **Google account** – Settings > Cloud and accounts > Backup and restore, and enable “Back up my data” to store app data and settings.
  • **Manual transfer** – Copy photos, videos, and documents to a computer via USB cable or to an SD card.
  • **Smart Switch** – Samsung’s desktop app can back up the entire phone to a PC.

Also, ensure the phone has at least a 50% battery charge. If the battery dies during the reset, the process can be interrupted, potentially leaving the device in a non-booting state. If your phone is fully unresponsive and you cannot back up, you may lose data permanently — there is no reliable way to recover it after a reset without a prior backup.

How to Hard Reset SM-G900F: Step-by-Step

There are two main methods: using the hardware keys (works even if the phone is frozen) and using the Settings menu (only if the phone boots normally).

Method 1: Hardware Key Reset (Recommended for frozen or locked phones)

  1. Turn off the phone completely. If it is frozen, remove the battery, wait 10 seconds, and reinsert it.
  2. Press and hold **Volume Up**, **Home**, and **Power** buttons simultaneously.
  3. When the Samsung logo appears, release all buttons. The phone will boot into Android System Recovery.
  4. Use the **Volume Down** button to navigate to “wipe data/factory reset”.
  5. Press the **Power** button to select it.
  6. Use **Volume Down** to highlight “Yes – delete all user data” and press **Power**.
  7. Wait for the reset to complete. The phone will show “Reboot system now” — press **Power** to restart.

The first boot after a reset takes longer than usual (up to 5 minutes) as the phone rebuilds its system files.

Method 2: Settings Menu Reset (If the phone works normally)

  1. Go to **Settings** > **Backup and reset** (or **Cloud and accounts** > **Backup and reset** on later Android versions).
  2. Tap **Factory data reset**.
  3. Scroll down and tap **Reset device**.
  4. If prompted, enter your PIN, password, or pattern.
  5. Tap **Delete all** to confirm.

This method wipes the same data as the hardware method but is safer because you can back up first.

What to Do If the Reset Fails or the Phone Won’t Boot

Occasionally, a hard reset may not work because the recovery menu is corrupted or the phone is stuck in a boot loop. Try these steps in order:

  • **Retry the key combo** – Make sure you press all three buttons simultaneously and hold them until the recovery menu appears. Sometimes the timing is off.
  • **Use a different recovery** – If the stock recovery is inaccessible, you can use Samsung’s Smart Switch emergency recovery: install Smart Switch on a PC, connect the phone, and select “More” > “Emergency software recovery”. This reinstalls the firmware.
  • **Charge the battery** – If the phone shows no response, it may be completely drained. Charge it for at least 30 minutes with the original charger, then try again.
  • **Try Safe Mode** – If the phone boots but crashes, boot into Safe Mode (hold Power, then long-press “Power off” on the screen) and uninstall recently downloaded apps before resetting.

If none of these work, the issue may be hardware-related (e.g., a failing battery or motherboard), and you may need professional repair.

Hard Reset vs. Factory Reset vs. Soft Reset

These terms are often used interchangeably, but they are different:

  • **Soft reset** – Simply restarting the phone (turn off and on). It clears temporary memory and does not delete any data.
  • **Factory reset** – The same as a hard reset; it restores the phone to its out-of-the-box state, deleting all user data.
  • **Hard reset** – Usually refers to the hardware-key method, but in practice it is identical to a factory reset.

A common misconception is that a hard reset removes the Android operating system. It does not — it only removes user data and settings, leaving the OS intact. If you want to reinstall a different Android version, you need to flash firmware via Odin (a PC tool), which is a separate process.

After the Reset: Setup and Restoring Data

After the reset, the phone will boot into the Android setup wizard. You will need to:

  1. Select a language and connect to Wi-Fi.
  2. Sign in with your Google account to restore apps and contacts (if you backed up).
  3. Sign in with your Samsung account to restore Samsung data.
  4. Set up a new screen lock method.

If you are selling the phone, do not sign in — leave it at the welcome screen so the new owner can set it up fresh. If you are keeping it, restore your backup and reinstall apps. Note that some apps (like banking apps) may require re-authentication after a reset.

Frequently Asked Questions

Will a hard reset remove the Android update on my SM-G900F?

No. A hard reset only clears user data and settings; it does not downgrade or remove the current Android version. If you want to go back to an older Android version, you must flash the older firmware using Odin, which is a more advanced procedure.

Can I recover data after a hard reset?

Generally, no. The data is erased and the storage is overwritten. If you have a backup (Google, Samsung, or local), you can restore it. Without a backup, data recovery is extremely difficult and usually not possible on modern devices due to encryption.

How do I hard reset my SM-G900F if the screen is broken?

If the screen is unresponsive but the phone still powers on, you can connect it to a PC and use Samsung Smart Switch’s emergency recovery, which may reset the device. If the phone is completely dead, you may need a repair shop to replace the screen first.

Does a hard reset fix a boot loop on the SM-G900F?

Sometimes yes. A boot loop (phone restarting repeatedly) is often caused by a corrupted app or system file. A hard reset can clear the corruption. If the loop persists after the reset, the issue may be hardware-related or require reflashing the firmware.

Is it safe to hard reset my SM-G900F?

Yes, it is a standard procedure designed by Samsung. The only risk is data loss, so always back up first. As long as you follow the steps correctly and have sufficient battery, the reset will not damage the hardware.

What is the difference between a hard reset and clearing the cache partition?

Clearing the cache partition (available in the same recovery menu) only deletes temporary system files, not your personal data. It can fix performance issues without a full reset. A hard reset wipes everything. Try clearing the cache first if you only have minor problems.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →