keepcalculator

06 Numbers and Powers

Hard Reset Samsung SM-G950FD: Step-by-Step

Card No. 06·72012 · Updated · Standard formula, shown below

To hard reset a Samsung SM-G950FD (Galaxy S8/S8+ dual-SIM), you can use the hardware key method: power off the phone, then press and hold Volume Up, Bixby, and Power until the Android logo appears, then use Volume keys to select “Wipe data/factory reset” and confirm with the Power key. This erases all data and restores factory settings, which is useful for fixing software issues, removing forgotten locks, or preparing the device for resale.

What the SM-G950FD Is

The SM-G950FD is the dual-SIM international variant of the Samsung Galaxy S8, released in 2017. It runs Android with Samsung’s One UI (upgradable to Android 9). The “FD” suffix specifically denotes dual-SIM capability, common in regions like Asia and Europe. The single-SIM version is SM-G950F. Both share the same hardware except for the second SIM slot. A hard reset on this model works identically to other Galaxy S8 variants, as the process is part of the system software, not the SIM configuration.

Why Perform a Hard Reset

Hard resets are typically done for three reasons:

  • Software glitches: Freezing, crashing apps, or boot loops that don’t respond to soft resets or cache wipes.
  • Forgotten screen lock: If you forget your PIN, pattern, or password, a hard reset removes it (but also wipes all data).
  • Preparing for sale: Ensures your personal data is erased before handing the phone to someone else.

It’s a more thorough reset than a “soft reset” (restart) or a “factory reset from settings,” both of which don’t require hardware keys. The hardware key method is the only way if the phone won’t boot into Android.

Before You Reset: Backup and Precautions

A hard reset permanently deletes all data on the internal storage, including photos, contacts, messages, apps, and settings. It does not remove data from your SIM card or microSD card, but it may format the internal storage only. To avoid losing data:

  • Back up to Samsung Cloud, Google Drive, or a computer (via Smart Switch).
  • Remove your Google account and Samsung account beforehand if possible – this prevents Factory Reset Protection (FRP) from locking you out after the reset.
  • Ensure the battery is charged above 50% to avoid interruption.

If you’re resetting because of a forgotten lock, note that FRP will require the original Google account credentials after the reset. If you don’t have them, you’ll need to use Samsung’s “Find My Mobile” service (if enabled) or contact Samsung support.

Step-by-Step: Hardware Key Method

This is the standard method when the phone is unresponsive or you can’t access settings.

  1. Power off the phone completely. If it’s frozen, press and hold Power + Volume Down for about 10 seconds to force restart, then let it boot and power off again.
  2. Press and hold Volume Up, Bixby (the dedicated button below Volume Down), and Power simultaneously.
  3. When the Android logo or Samsung logo appears, release all buttons. The phone will boot into Recovery Mode (blue screen with options).
  4. Use Volume Down to navigate to “Wipe data/factory reset.”
  5. Press Power to select.
  6. Use Volume Down to highlight “Factory data reset” and press Power.
  7. Wait for the process to complete – it may take a few minutes.
  8. After it finishes, “Reboot system now” will be highlighted. Press Power to restart.

The phone will boot as if new, prompting you to set up language, Wi-Fi, and accounts.

Alternative: Reset from Settings Menu

If the phone boots normally, you can reset without hardware keys:

  1. Go to Settings → General Management → Reset.
  2. Tap Factory data reset.
  3. Scroll down and tap Reset.
  4. If prompted, enter your PIN or password.
  5. Tap Delete all.

This method is safer because it gives you a chance to back up and sign out of accounts first. It’s also the only way to reset if the hardware keys are broken.

Common Problems and Fixes

  • Phone doesn’t enter Recovery Mode: Make sure you press the buttons in the exact order (Volume Up first, then Bixby, then Power). Try again with a different timing – sometimes you need to hold all three for 5-7 seconds.
  • Stuck on “Wiping data” screen: Wait up to 10 minutes. If it’s stuck longer, force restart by holding Power + Volume Down for 10 seconds and try again.
  • FRP lock after reset: You’ll need the original Google account credentials. If you don’t have them, you can try Samsung’s “Find My Mobile” to remotely unlock, or contact Samsung with proof of purchase.
  • Phone boots to Recovery instead of Android: This can happen if the volume key is stuck. Check the button, or try the settings method.

Hard Reset vs. Soft Reset vs. Cache Wipe

It’s easy to confuse these terms:

  • Soft reset: Just restarting the phone – no data loss.
  • Cache wipe: In Recovery Mode, “Wipe cache partition” clears temporary system files without deleting personal data. Useful for slowdowns after updates.
  • Hard reset: Wipes everything and restores factory state.

Always try a cache wipe first if you’re experiencing minor issues – it’s less destructive. Only do a hard reset when you’re sure you can afford to lose all data.

Frequently Asked Questions

Will a hard reset remove the SIM card lock?

No. A hard reset only affects the phone’s internal storage. SIM card locks (PIN/PUK) are stored on the SIM itself. If your SIM is locked, you’ll need the PUK code from your carrier.

Does a hard reset delete photos on the microSD card?

No. The reset formats only the internal storage. Files on the microSD card remain untouched. However, some apps may store data on the SD card, and those files might be orphaned after the reset.

Can I hard reset without the Bixby button?

No, the SM-G950FD requires the Bixby button for the hardware key method. If Bixby is broken, you can still reset from the settings menu (if the phone boots) or use Samsung’s Find My Mobile service to remotely reset.

How long does a hard reset take?

The wipe process itself takes about 1-3 minutes. The first boot after reset can take up to 5-10 minutes as the system rebuilds. If it takes longer than 15 minutes, it may be stuck.

Will a hard reset fix a boot loop?

Often, yes. Boot loops are usually caused by corrupt system files or incompatible apps. A hard reset clears those files. If the boot loop persists after reset, it may indicate a hardware issue (e.g., motherboard or battery).

Is a hard reset the same as a factory reset?

Yes, they are the same thing. “Hard reset” usually refers to the hardware key method, while “factory reset” can be done from settings. Both erase all data and restore the phone to its original out-of-box state.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →