Starlink Availability & Cost at Your Address

This guide walks you through checking whether Starlink satellite internet is available at your address and what it will cost, including equipment, monthly service, and any one-time fees. You only need your address and a web browser—no account or personal details are required to check availability.

What You’ll Need

• Your full street address (including city, state/province, and postal code)
• A web browser on any device (phone, tablet, or computer)
• An internet connection (even a slow one works, but you need enough to load the Starlink website)
• An email address if you decide to place an order (but not required just to check)

Step-by-Step

1. Open the official Starlink website. In your browser, go to starlink.com. Do not use third-party resellers or lookalike sites—always verify the URL is exactly starlink.com.
2. Click on the “Order” or “Get Starlink” button. This is usually at the top right or in the center of the page. It will take you to a page where you can enter your address.
3. Enter your service address. Type your full street address into the search bar. Use the format: house number, street name, city, state/province, postal code. For example: 123 Main St, Springfield, IL 62701. If you live in a rural area without a formal street address, try entering your nearest town or use the map pin feature if available.
4. Select your exact address from the dropdown. As you type, Starlink will suggest matching addresses. Click the one that matches yours exactly. If you don’t see your address, try a slightly different spelling or add a unit number if applicable.
5. Click “Check Availability” or “Order Now”. The website will then check your location against their coverage map. This may take a few seconds.
6. Read the result. If Starlink is available, you will see a message like “Starlink is available at your location” along with pricing details. If it’s not available, you’ll see a message about waiting for service or a waitlist option.
7. Review the pricing details. If available, the page will show the one-time equipment cost and the monthly service fee. Note that these prices vary by region and sometimes by plan (Residential, Business, RV, etc.). The displayed price is for your specific area.
8. Check for additional fees. Look for any shipping costs, taxes, or installation fees (if you choose professional installation). These are usually shown on the order summary page before you enter payment information.
9. If you’re not ready to order, save the information. You can write down the pricing or take a screenshot. You don’t need to create an account to see availability and costs.
10. If you want to proceed, click “Order Now” and follow the prompts. You’ll need to create an account with your email, provide shipping details, and enter payment information. The equipment will be shipped to you, and you can self-install or pay for professional installation.

Common Mistakes

• Entering the wrong address format: Using abbreviations or missing the postal code can lead to “not available” results. Double-check your address format.
• Using a different address than your actual service location: If you enter a friend’s address in a city, you’ll see availability for that city, not your rural home. Always use the exact address where you’ll use the service.
• Assuming availability based on a neighbor: Starlink coverage is not uniform; it can vary within a few miles due to satellite beam patterns and local obstructions. Check your specific address, not just your town.
• Ignoring the waitlist option: If you see “Waitlist” or “Deposit”, it means service is not immediately available, but you can reserve a spot. Some people mistakenly think this means no service ever.
• Not checking for updated pricing: Starlink prices can change, and the website shows current prices. Don’t rely on third-party blogs or old articles for pricing.

Tips

• Check during off-peak hours: The website may be slower during high-traffic times, but availability results are the same. However, if you’re on a slow connection, try early morning or late night for faster loading.
• Use the map feature: If your address isn’t found, use the interactive map on the Starlink website to drop a pin at your exact location. This can be more accurate for rural addresses.
• Consider obstructions: Even if Starlink is available, you need a clear view of the sky. The Starlink app has an obstruction checker that uses your phone’s camera to see if trees or buildings will block the signal. It’s worth downloading the app before ordering.
• Compare plans: Starlink offers different plans (Residential, Business, RV, etc.). The availability check shows the standard Residential plan, but you can also check other plans by toggling the plan type on the order page.
• Look for promotions: Occasionally, Starlink runs promotions (e.g., free shipping or reduced equipment cost). These are displayed on the order page, so keep an eye out.

Troubleshooting

• Website says “Service not available” but you think it should be: This can happen if your address is on the edge of coverage. Try moving the pin on the map slightly, or check if you’re in a “waitlist” area. Sometimes, availability expands, so check back in a few weeks.
• Address not found: If the search doesn’t find your address, try typing just the street name and city, then select from the dropdown. If that fails, use the map to drop a pin. You can also try using the plus code (a short digital address) from Google Maps.
• Page loads but no pricing shows: This might be a browser issue. Try clearing your cache or using a different browser (e.g., Chrome, Firefox, Safari). Also, disable any ad-blockers that might interfere.
• You see “Deposit” instead of full pricing: This means service is not yet available, but you can pay a refundable deposit to reserve a spot. The deposit amount is shown, and you’ll be notified when service is ready.
• Pricing seems higher than advertised: Starlink prices vary by region and are subject to taxes and fees. The price shown includes only the base service; additional taxes and shipping are added at checkout. Make sure you’re looking at the final total.
• Website is down or not loading: Starlink’s website occasionally has outages. Wait a few hours and try again. You can also check Starlink’s social media for status updates.

Frequently Asked Questions

How much does Starlink cost?

Pricing varies by location and plan. In the US, the standard Residential plan typically costs around $110–$120 per month, plus a one-time equipment fee of $499–$599. However, prices can be higher in remote areas or for Business plans. The website shows exact pricing for your address.

Is Starlink available everywhere?

No. Starlink is available in many countries and regions, but coverage is not global. It depends on satellite coverage and regulatory approvals. The availability check will tell you if service is available at your address.

Can I use Starlink while traveling?

Yes, but you need a specific plan. The “Roam” (formerly RV) plan allows you to use Starlink at different locations, but it has lower priority than Residential service, meaning speeds may be slower during peak times. The availability check for your home address may not apply to travel.

Do I need to hire a professional to install Starlink?

No, most people self-install. The kit includes a tripod, mounting base, and cables. The Starlink app guides you through setup and uses augmented reality to find the best spot for the dish. Professional installation is available for an extra fee if you prefer.

What internet speeds can I expect?

Starlink advertises download speeds of 50–200 Mbps and upload speeds of 10–40 Mbps, with latency of 20–40 ms. Actual speeds vary based on location, time of day, and network congestion. The app can test your speed after installation.

Can I get a refund if I cancel?

Yes, Starlink offers a 30-day trial period. If you cancel within 30 days of receiving the equipment, you can return it for a full refund of the equipment cost. The monthly service fee is prorated. After 30 days, the equipment is yours, and you can cancel service anytime.

Related

• Refresh Rate & Input Lag for a Second Esports Monitor
• Energy vs Power Signals: Definitions, Equations & Examples
• Marvel Rivals Leaked Files: Amaranth White Fox Appearance