keepcalculator

06 Numbers and Powers

How to Choose a TV for a Future 4K or 8K Console

Card No. 06·74324 · Updated · Standard formula, shown below

Choosing a TV for a future 4K or 8K game console means making sure the display can handle the console’s maximum output—resolution, refresh rate, and features like HDMI 2.1. This guide walks you through the key specs to check, so you buy a TV that won’t bottleneck your next-gen gaming experience.

What You’ll Need

  • Your budget range (decide before you start shopping)
  • Measuring tape (to check the TV fits your space and viewing distance)
  • List of the consoles you plan to connect (e.g., PS5, Xbox Series X, future 8K models)

Step-by-Step

  1. Confirm the console’s output capabilities. Check the official specs for the console you plan to buy. Current 4K consoles output up to 4K at 120Hz, while future 8K consoles may support 8K at 60Hz. Write down the max resolution and refresh rate.
  2. Check the TV’s native resolution. Look for “native 4K” (3840×2160) or “native 8K” (7680×4320). Avoid terms like “4K upscaling”—that means the panel is not true 4K. For an 8K console, you need a native 8K panel, but note that 8K TVs are still expensive and content is limited.
  3. Verify HDMI 2.1 support. HDMI 2.1 is required for 4K at 120Hz or 8K at 60Hz. Check the TV’s spec sheet for “HDMI 2.1” and confirm it has at least one port that supports the full bandwidth (48Gbps). Some TVs have HDMI 2.1 ports but only on certain inputs—make sure the one you use is labeled.
  4. Check refresh rate and VRR. Look for a native 120Hz panel (not 60Hz with motion smoothing). Variable Refresh Rate (VRR) reduces screen tearing and is supported on most HDMI 2.1 TVs. Also check for Auto Low Latency Mode (ALLM) to automatically switch to game mode.
  5. Measure your viewing distance. For 4K, sit about 1 to 1.5 times the screen’s diagonal distance (e.g., 55-inch TV → 55–82 inches away). For 8K, you can sit closer (0.75 to 1 times the diagonal) to see the extra detail. Use a tape measure to plan.
  6. Compare input lag. Look for input lag under 20ms in game mode. Lower is better for fast-paced games. Check professional reviews for real-world numbers, as spec sheets often omit this.
  7. Consider HDR and peak brightness. For HDR gaming, look for a TV with peak brightness over 600 nits (ideally 1000+ for HDR10+ or Dolby Vision). OLED and high-end QLED panels usually excel here. Check that it supports HDR10 and ideally Dolby Vision or HDR10+.
  8. Check for 8K upscaling (if buying 8K). Since native 8K content is rare, ensure the TV has good upscaling to make 4K and lower-resolution games look sharp. Read reviews on upscaling quality, as it varies by brand.
  9. Read professional reviews. Search for the specific model plus “gaming input lag” and “HDMI 2.1 bandwidth” to confirm real-world performance. Don’t rely solely on the manufacturer’s marketing.
  10. Future-proof with eARC. If you plan to connect a soundbar or receiver, ensure the TV has eARC (enhanced Audio Return Channel) to support high-quality audio formats like Dolby Atmos.

Common Mistakes

  • Buying a 120Hz TV that isn’t actually 120Hz. Some TVs claim 120Hz but use motion interpolation (fake refresh rate). Check the native panel spec.
  • Ignoring HDMI port versions. A TV may have HDMI 2.1 but only on one port, or the port may be limited to 24Gbps (which can’t handle 4K/120Hz). Verify the full bandwidth.
  • Choosing 8K just for future-proofing. 8K consoles are not yet mainstream, and 8K TVs are expensive. A high-quality 4K TV with HDMI 2.1 is often a better value.
  • Forgetting about input lag. Even with a fast panel, high input lag makes games feel unresponsive. Always check reviews.
  • Sitting too far away. If you sit too far, you won’t see the difference between 4K and 8K, wasting money on a higher resolution.

Tips

  • Prioritize HDMI 2.1 and 120Hz over 8K resolution—most gamers will benefit more from smoother gameplay than extra pixels.
  • For OLED, be aware of burn-in risk with static HUDs, but modern OLEDs have mitigations. If you play long sessions with static elements, consider QLED or Mini-LED.
  • Use the TV’s game mode to reduce input lag. Some TVs allow you to adjust settings per input, so set it up once per console.
  • Check if the TV supports FreeSync or G-Sync for VRR. Both work with HDMI 2.1 VRR, but some TVs have proprietary implementations.
  • Consider the TV’s operating system and smart features, but don’t let them outweigh picture quality—you can always use an external streaming device.

Troubleshooting

  • No 4K/120Hz option on your console? Make sure you’re using the HDMI cable that came with the console (or a certified Ultra High Speed HDMI cable). Also, enable “Enhanced HDMI” or “HDMI UHD Color” in the TV’s settings.
  • Screen tearing or stutter? Enable VRR on both the TV and console. If VRR isn’t available, try turning on the TV’s game mode to reduce processing.
  • Picture looks blurry? Check that the console’s output resolution is set to native (not 1080p upscaled). Also, disable any “sharpness” or “noise reduction” settings on the TV.
  • HDR looks washed out? Ensure the TV is set to HDR mode and the console’s HDR calibration is done. Also, check that the HDMI port supports HDR (some older ports may not).
  • Audio not working with soundbar? If using eARC, make sure the soundbar is connected to the eARC port and the TV’s audio output is set to “Pass Through” or “Bitstream.”

Frequently Asked Questions

Do I need an 8K TV for a future 8K console?

Yes, to see native 8K you need an 8K TV. However, an 8K console will also work on a 4K TV (downscaling to 4K), so you won’t get the full benefit but it will still be playable.

What is HDMI 2.1 and why is it important?

HDMI 2.1 is the latest HDMI standard that supports higher bandwidth (up to 48Gbps), enabling 4K at 120Hz, 8K at 60Hz, and features like VRR and eARC. Without it, you can’t take full advantage of next-gen consoles.

Is OLED or QLED better for gaming?

OLED offers perfect blacks and fast response times, but has burn-in risk. QLED (or Mini-LED) is brighter and cheaper, but may have slower response. For gaming, both are good; choose based on your room’s lighting and budget.

What is VRR and do I need it?

Variable Refresh Rate (VRR) syncs the TV’s refresh rate to the console’s frame rate, reducing screen tearing and stutter. It’s very beneficial for gaming, especially on consoles that don’t have a locked 60fps.

How big of a TV should I get?

It depends on your viewing distance. For 4K, a 55-inch TV is ideal at 6-8 feet. For 8K, you can sit closer, so a 65-inch at 5-6 feet works. Measure your space and use the 1 to 1.5 rule for 4K.

Can I use a PC monitor instead of a TV?

Yes, but most monitors don’t have HDMI 2.1 yet, and they lack features like HDR and smart functions. If you want a big screen and console features, a TV is usually better.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →