Disable HUD & Hide UI in Cyberpunk 2077 Photos

This guide shows you exactly how to disable the HUD and hide all UI elements in Cyberpunk 2077 so you can capture clean, cinematic screenshots without any on-screen clutter. You’ll learn the in-game photo mode settings, the debug console commands for PC, and a few workarounds for console players. By the end, you’ll be able to take completely UI-free photos in any situation.

What You’ll Need

• Cyberpunk 2077 installed (any version, including 2.0+ and Phantom Liberty).
• For the console method: a keyboard (PC only) or a controller with the photo mode shortcut.
• For the debug console method: a PC copy of the game and the Cyber Engine Tweaks (CET) mod installed. This is optional but gives the most control.
• Basic familiarity with the game’s pause menu and settings.

Step-by-Step

Method 1: Using Photo Mode (All Platforms)

1. Enter Photo Mode: Press the designated key/button. On PC, it’s F by default; on consoles, press both thumbsticks (L3 + R3) simultaneously. You can also open the pause menu and select “Photo Mode” from the bottom row.
2. Position your shot: Use the camera controls to frame your subject. You can move the camera freely, adjust the field of view, and rotate the angle.
3. Hide the HUD in Photo Mode: Look for the “HUD” or “UI” toggle. In the photo mode interface, press the key/button that hides the menu itself. On PC, press F again or H to hide the photo mode UI. On consoles, press the touchpad (PS) or the View button (Xbox) to hide the interface.
4. Take the screenshot: Once the UI is hidden, use your platform’s screenshot function (e.g., F12 on Steam, Win+Alt+PrtScn on Xbox Game Bar, or the Share button on consoles). The photo will be saved without any HUD elements.

Method 2: Disabling the HUD in the Game Settings (All Platforms)

1. Open Settings: From the main menu or pause menu, go to Settings.
2. Navigate to the Interface tab: Select the Interface tab (the one with the monitor icon).
3. Turn off HUD elements: You’ll see a list of toggles for various HUD components. Set the following to Off (or set them to “Dynamic” if you want them to appear only when relevant):
   • HUD Mode: Set to “Off” to disable the entire HUD at once.
   • Quest Tracker: Off
   • Minimap: Off
   • Objective Tracker: Off
   • Health Bar / Stamina Bar: Off
   • Ammo Counter: Off
   • Vehicle UI: Off (if you’re taking car photos)
   • Notification Pop-ups: Off
4. Apply and exit: The changes take effect immediately. Now, when you enter photo mode, the HUD will be completely absent, even before you hide the photo mode UI.
5. Remember to re-enable: After your photo session, go back and re-enable the HUD elements you turned off, or you’ll be playing without them.

Method 3: Using the Debug Console (PC Only, with Cyber Engine Tweaks)

1. Install Cyber Engine Tweaks (CET): Download CET from its official GitHub or Nexus Mods page. Follow the installation instructions for your game version. This mod is essential for the console commands.
2. Launch the game and open the console: Start Cyberpunk 2077. Once in-game, press the ~ (tilde) key to open the CET console.
3. Hide the entire HUD: Type the following command and press Enter:

   Hud.ShowHud(false)

   This instantly removes all HUD elements from the screen. To bring it back, type Hud.ShowHud(true).

4. Hide specific elements (optional): If you want to hide only certain parts, use these commands:
   • Hud.ShowMinimap(false) – hides the minimap.
   • Hud.ShowQuestTracker(false) – hides the quest tracker.
   • Hud.ShowHealthBar(false) – hides the health bar.
5. Take your screenshot: With the HUD hidden, you can now take a clean screenshot using any capture tool. You can also enter photo mode normally – the HUD will remain hidden.
6. Re-enable the HUD: When you’re done, type Hud.ShowHud(true) to restore the HUD. If you used specific commands, re-enable each one accordingly.

Common Mistakes

• Forgetting to hide the photo mode UI itself: Many players enter photo mode, frame the shot, and then take a screenshot while the photo mode menu is still visible. Always press the hide UI button (F on PC, touchpad/View on consoles) to remove the camera controls and menu.
• Turning off HUD settings but not restarting the game: Some HUD settings may not apply immediately, especially if you change them mid-session. If you don’t see a change, try restarting the game or loading a save.
• Using the wrong console command: Typing Hud.ShowHud(0) instead of false might not work. Use the exact syntax: Hud.ShowHud(false).
• Not disabling the quest tracker separately: Even with the HUD mode set to “Off,” some elements like the quest tracker might still appear if they’re set to “Dynamic” or “Always.” Double-check each individual toggle.
• Taking screenshots with the Steam overlay active: The Steam overlay can add its own UI to your screenshot. Disable the overlay or use a different capture method if you see it in your shots.

Tips

• Use the “Dynamic” HUD mode for gameplay: If you want a mostly clean screen while playing, set the HUD mode to “Dynamic” – it hides most elements until they’re relevant (e.g., when you take damage or aim).
• Combine photo mode with HUD off: For the absolute cleanest shot, turn off the HUD in settings, then enter photo mode and hide the photo mode UI. This gives you a completely unobstructed view.
• Use the console to hide the crosshair: If you’re taking screenshots during combat, the crosshair can be distracting. The command Hud.ShowCrosshair(false) (if available in your CET version) will hide it.
• Create a custom preset: In the settings, you can create a custom HUD preset with everything off. Then, before a photo session, just switch to that preset and switch back after.
• Experiment with the photo mode camera: The photo mode has a variety of camera settings (focal length, aperture, etc.) that can make your shots look professional. Take advantage of these while the HUD is hidden.

Troubleshooting

• HUD won’t hide using the settings method: If you’ve turned off all HUD elements but they still appear, try restarting the game. Some settings require a reload to take effect. If that doesn’t work, check if any mods are overriding your settings.
• Console commands not working: If you’ve installed CET but the console doesn’t open, make sure the mod is compatible with your game version. Check the CET GitHub page for updates. Also, ensure you’re pressing the correct key (default is the tilde key, but you can change it in the CET config).
• Photo mode UI won’t hide: On PC, if pressing F doesn’t hide the photo mode UI, try pressing the key twice or using the mouse to click the “Hide UI” button (if present). On consoles, make sure you’re pressing the correct button – sometimes it’s the touchpad click, not the Share button.
• HUD reappears when you enter photo mode: This can happen if the game’s photo mode resets the HUD state. Try using the console command Hud.ShowHud(false) after entering photo mode.
• Screenshots still show HUD elements: If you’re using a capture tool that overlays its own UI (like Discord or GeForce Experience), disable those overlays or use a different tool like OBS or the built-in Xbox Game Bar.

Frequently Asked Questions

Can I hide the HUD on PS5 or Xbox Series X?

Yes, you can use the in-game settings method (Method 2) on all platforms. Simply go to Settings > Interface and turn off the HUD elements you want hidden. There’s no console command on consoles, but the settings work the same way.

Does disabling the HUD affect gameplay?

Yes, it removes crucial information like health, ammo, and the minimap. It’s recommended only for screenshots or if you’re playing on a very high difficulty and want an extra challenge. You can always re-enable it.

Will these methods work in the Phantom Liberty expansion?

Yes, the HUD settings and photo mode are the same in Phantom Liberty. The console commands via CET also work, provided you have the latest version of the mod that supports the expansion.

How do I take a screenshot without the Steam overlay?

You can disable the Steam overlay in Steam Settings > In-Game, or use a different capture tool like the Xbox Game Bar (Win+G) or OBS Studio. Many players also use the game’s built-in photo mode screenshot function, which saves directly to your drive.

Is there a way to hide the HUD temporarily with a hotkey?

Yes, on PC you can use the console command Hud.ShowHud(false) and bind it to a key via CET’s macro system. Alternatively, some mods on Nexus Mods offer a one-key HUD toggle.

Why do my screenshots have a watermark or logo?

If you’re using a capture tool like GeForce Experience, it may add a watermark. Check the tool’s settings to disable it. Also, make sure the game’s own watermark (if any) is turned off in the display settings.

Related

• Can’t Hear Text Messages Through Car Stereo? Fix It
• Import HEIC into Lightroom: Full Guide
• Samsung vs Vizio TVs: Which Should You Buy?