This guide shows you how to increase your frames per second (FPS) in PC games while keeping the graphics looking sharp. You’ll learn practical tweaks—from in-game settings to system-level adjustments—that target performance bottlenecks without resorting to turning everything to low. Start with the steps that give the biggest gains, and you’ll likely see a smoother experience in under an hour.
What You’ll Need
- A Windows PC (10 or 11) with your game installed
- Administrator access to change system settings
- Your GPU’s control panel (NVIDIA, AMD, or Intel)
- A benchmarking tool like MSI Afterburner or the game’s built-in benchmark (optional but helpful)
Step-by-Step
- Update your graphics drivers. Outdated drivers can leave performance on the table. Visit your GPU manufacturer’s website (NVIDIA, AMD, Intel) and download the latest driver. Use a clean installation option if available. This ensures your hardware runs with the latest optimizations for new games.
- Enable Game Mode in Windows. Press Win + I, go to Gaming > Game Mode, and turn it on. This prioritizes your game’s CPU and GPU resources in the background. Also, under Gaming > Captures, disable background recording to free up resources.
- Adjust in-game graphics settings intelligently. Instead of dropping everything to low, focus on the heavy hitters:
- Shadow quality: Set to Medium or High. Shadows are a major FPS drain; High is often visually similar to Ultra.
- Anti-aliasing: Use a lighter method like FXAA or TAA instead of MSAA. If you have a newer GPU, try DLSS (NVIDIA) or FSR (AMD) for better performance with minimal visual loss.
- Texture quality: Keep this at High or Ultra if your GPU has enough VRAM. It affects sharpness more than FPS.
- Volumetric lighting/fog: Lower to Medium. This is another big FPS drain with subtle visual impact.
- Motion blur: Turn it off. It’s a personal preference and costs FPS.
- Set a frame rate cap (if needed). If your game runs at 200 FPS but your monitor is 60Hz, capping to 60 (or 58) reduces GPU load, lowers temperatures, and prevents screen tearing. Use the in-game limiter or your GPU control panel’s frame rate cap.
- Optimize your GPU control panel settings. Open your GPU’s control panel (e.g., NVIDIA Control Panel). Under “Manage 3D settings,” set:
- Power management mode: Prefer Maximum Performance.
- Texture filtering – Quality: High Performance.
- Vertical sync: Off (unless you experience tearing; then use Fast Sync or Adaptive).
- Low latency mode: Ultra (if available).
- Close background applications. Open Task Manager (Ctrl + Shift + Esc) and end tasks that are eating CPU or RAM, like browsers, Discord (use the overlay-free version), or game launchers. Also, disable startup programs that run in the background.
- Adjust Windows power plan. Go to Control Panel > Hardware and Sound > Power Options. Select “High Performance” or “Ultimate Performance” (if available). This prevents your CPU from throttling down during gameplay.
- Consider overclocking (optional). If you’re comfortable, use your GPU’s software (e.g., MSI Afterburner) to increase the core clock and memory clock slightly. Do this in small increments and test stability. This can yield 5-10% more FPS, but it increases heat and power draw.
Common Mistakes
- Lowering resolution unnecessarily. Dropping from 1440p to 1080p hurts sharpness a lot. Instead, keep resolution native and reduce other settings.
- Setting everything to Low. This often looks terrible and doesn’t always help if the bottleneck is the CPU.
- Ignoring CPU bottleneck. If your CPU is maxed out, lowering graphics won’t help. Check Task Manager: if CPU is at 100% while GPU is below 90%, you’re CPU-bound. In that case, lower draw distance, reduce NPC count, or close background apps.
- Forgetting to restart the game after changes. Some settings only apply after a restart.
- Using third-party “game booster” tools. They often do little and can cause instability.
Tips
- Use a benchmark. Run a built-in benchmark or use a tool like CapFrameX to measure FPS before and after changes. Only change one setting at a time to see its impact.
- Keep your PC cool. Clean dust from fans, ensure good airflow, and consider repasting the CPU if it’s old. Thermal throttling kills FPS.
- Check for game-specific guides. Some games have known settings that are poorly optimized. A quick search can reveal which ones to lower.
- Use upscaling technologies. DLSS, FSR, or Intel XeSS can boost FPS significantly while looking almost as good as native. Enable them if your game supports them.
- Update your BIOS and chipset drivers. These can improve CPU performance and stability, especially on newer platforms.
Troubleshooting
- FPS didn’t improve at all: Check if you’re CPU-bound (CPU at 100%, GPU not). If so, lower CPU-heavy settings like draw distance, shadows, and physics. Also, ensure your power plan is set to High Performance.
- Game crashes after changes: Revert the last change you made. If you overclocked, reduce the clock speeds. Also, update your drivers to the latest stable version.
- Screen tearing appears: Enable V-Sync in the game or use a frame rate cap that matches your monitor’s refresh rate. Alternatively, enable G-Sync/FreeSync if your monitor supports it.
- Graphics look blurry: You may have enabled an upscaling mode that’s too aggressive. Try a higher quality preset (e.g., DLSS Quality instead of Performance). Also, check that your resolution is set to native.
- Game stutters even with high FPS: This is often a shader compilation issue. Play for a few minutes to let shaders cache, or look for a “shader cache” option in your GPU control panel and set it to “On.”
Frequently Asked Questions
Will lowering graphics settings always increase FPS?
Not always. If your CPU is the bottleneck, reducing GPU-heavy settings like textures won’t help. You need to lower CPU-bound settings like shadows, draw distance, and physics.
Is it better to lower resolution or graphics settings?
Generally, lowering resolution gives a bigger FPS boost but hurts image sharpness more. If you have a high-resolution monitor, try lowering settings first, then consider a slight resolution reduction (e.g., 1440p to 1080p) as a last resort.
What is DLSS/FSR and should I use it?
These are upscaling technologies that render at a lower resolution and upscale to your native resolution using AI. They can boost FPS significantly while looking almost as good as native. Yes, use them if your game supports them.
How do I know if my CPU or GPU is the bottleneck?
Open Task Manager while playing. If your CPU is near 100% and your GPU is below 90%, you’re CPU-bound. If the GPU is at 100% and CPU is lower, you’re GPU-bound. This tells you which settings to adjust.
Is overclocking safe?
Overclocking is generally safe if done carefully and within voltage/temperature limits. It can void warranties and increase heat, but modern GPUs have built-in protection. Start with small increments and stress-test.
Why does my FPS drop in certain areas even after optimization?
This is normal. Dense areas, heavy effects, or complex scenes can cause temporary dips. It’s often due to CPU load or shader compilation. Try lowering shadow quality or draw distance to smooth these areas.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Arctic Sea Ice Forecasts Disagree: What to Do
- MySQL Workbench to VPS: SSH Tunnel Setup
- Bluesky Beginners Guide: How to Get Started5.00 min/km
- LG V20 Won’t Turn On? Fixed
- Snagit vs Camtasia: Which One Do You Need?
- Scale a Small Business Without Losing Culture