Install TWRP on LG Exceed 2 VS450PP

This guide walks you through installing TWRP (Team Win Recovery Project) on the LG Exceed 2 (model VS450PP), a budget-friendly phone that benefits from a custom recovery. With TWRP installed, you can create full backups, flash custom ROMs, and gain deeper system control. Before starting, you must unlock the bootloader and have a Windows PC with the necessary drivers and tools ready.

What You’ll Need

• A Windows PC (7, 8, 10, or 11)
• USB cable (preferably the original)
• LG USB drivers installed on your PC
• Minimal ADB and Fastboot tool (or platform-tools)
• TWRP image file for the LG Exceed 2 (usually named twrp-3.x.x-x-vs450pp.img)
• OEM unlock enabled (via Developer Options) and bootloader unlocked
• Backup of your personal data – this process wipes the device

Step-by-Step

1. Enable Developer Options: Go to Settings > About phone and tap Build number seven times until you see “You are now a developer.�
2. Enable OEM Unlock and USB Debugging: In Settings > Developer options, turn on both OEM unlocking and USB debugging. If OEM unlocking is greyed out, check for a network or carrier lock – it may not be possible.
3. Install ADB and Fastboot: Download and extract the platform-tools to a folder like C:\adb. Add this folder to your PATH or use it directly in Command Prompt.
4. Install LG USB Drivers: Install the official LG drivers so your PC recognizes the phone in download mode and ADB.
5. Connect Your Phone: Plug the phone into the PC with USB debugging enabled. When prompted on the phone, allow USB debugging.
6. Verify ADB Connection: Open a Command Prompt in the folder with ADB and run adb devices. You should see your device listed as “deviceâ€�. If not, reinstall drivers and try a different USB port.
7. Reboot to Bootloader: Run adb reboot bootloader. The phone will restart into fastboot mode (a black screen with fastboot text).
8. Unlock the Bootloader (if not already): In fastboot mode, run fastboot oem unlock or fastboot flashing unlock (depending on your device). Confirm on the phone screen. This erases all data – that’s why you backed up.
9. Flash TWRP: With the phone still in fastboot, run fastboot flash recovery twrp-3.x.x-x-vs450pp.img. Replace the filename with the actual one you downloaded.
10. Reboot into Recovery: After flashing, run fastboot reboot. As the phone reboots, hold Volume Down + Power (or the key combo for your model) to boot directly into recovery. If you miss it, you can also use adb reboot recovery after the system boots, but the first boot after flashing may overwrite TWRP – so it’s best to boot into recovery immediately.
11. First Boot in TWRP: When TWRP loads, it may ask to keep system read-only. Swipe to allow modifications. You’re done – TWRP is installed.

Common Mistakes

• Not enabling OEM unlock before starting – this is mandatory for most LG devices.
• Using the wrong TWRP image (e.g., for a different variant). Always verify the filename matches VS450PP.
• Not booting into recovery immediately after flashing – the stock bootloader can overwrite TWRP on first boot.
• Forgetting to install LG drivers – ADB won’t see the device.
• Using a faulty USB cable or port – this causes intermittent disconnects.

Tips

• Keep a backup of the stock recovery image (extract from the KDZ firmware) so you can restore if needed.
• After TWRP is installed, make a full Nandroid backup before flashing anything else.
• If you plan to root, download the latest Magisk zip and flash it from TWRP.
• Use a short, high-quality USB cable and a USB port directly on your PC (not a hub).
• Set your phone to stay awake while charging in Developer Options to avoid screen sleep during long operations.

Troubleshooting

• ADB doesn’t see the device: Reinstall LG drivers, try a different USB port, and ensure USB debugging is enabled. Also, check that the phone is not in “charging onlyâ€� mode – select “File Transferâ€� or “MTPâ€� when prompted.
• Fastboot doesn’t recognize the phone: Run fastboot devices. If empty, install the fastboot driver manually via Device Manager (update driver → browse → let me pick → Android Bootloader Interface).
• Bootloader unlock fails: Some carriers (like Verizon) may block OEM unlock. If you see an error, your device may be permanently locked – you cannot install TWRP.
• TWRP doesn’t stick after reboot: You likely didn’t boot into recovery immediately. Reflash TWRP and this time, after fastboot reboot, hold the key combo right away. Alternatively, after flashing, use the command fastboot boot twrp.img to test it without permanently flashing.
• Phone boots to a black screen or bootloop: This can happen if the bootloader is still locked. Reboot to fastboot and run fastboot oem lock to re-lock, then start over. If that doesn’t work, restore stock firmware via LGUP or a KDZ file.

Frequently Asked Questions

Does installing TWRP void my warranty?

Yes, unlocking the bootloader and flashing a custom recovery typically voids the manufacturer warranty. Some carriers may still honor it, but assume it’s void.

Will TWRP erase my data?

Unlocking the bootloader erases all data. Installing TWRP itself does not, but you must unlock first. Always back up before starting.

Can I uninstall TWRP later?

Yes. You can flash the stock recovery image via fastboot (fastboot flash recovery stock_recovery.img) or restore a backup you made before.

Is it safe to use TWRP on a daily driver?

Generally yes, but there is a small risk of soft-bricking if you flash incompatible files. Keep a backup and only flash from trusted sources.

Why does my phone show “Secure Boot Error� after flashing?

This usually means the bootloader is still locked. Reboot to fastboot and unlock it properly. If it persists, reflash the stock boot image.

Can I install TWRP without a PC?

No, the standard method requires a PC. Some apps might work, but they are unreliable for this model and could brick the device.

Related

• Synth Riders DLC Without Full Game: Can You?
• What to Do After Device Is Rooted? Next Steps
• Turn Steam Frame Files Into Custom Accessories