This guide shows you how to capture two of the night sky’s most rewarding targets—the red planet Mars and the Beehive Cluster (M44)—using just a smartphone and a basic tripod or steady surface. You’ll learn the exact camera settings, focusing tricks, and timing needed to get a recognizable image of both, even from a city backyard. No telescope or expensive astrophotography gear is required, but a phone with a manual/pro mode and a way to keep it still will make a huge difference.
What You’ll Need
- A smartphone with a camera that has manual/pro mode (ISO, shutter speed, focus control). Most mid-range and flagship phones from the last few years have this.
- A tripod or a stable surface (a wall, a car roof, or a stack of books). Even a small tabletop tripod works.
- A Bluetooth remote shutter or the phone’s self-timer (to avoid shaking when you tap the shutter).
- A clear sky with minimal light pollution. Mars is bright, but the Beehive Cluster is faint, so darker skies help a lot.
- A free star chart app (like Stellarium, SkySafari, or Google Sky Map) to locate both objects.
- Optional: a clip-on telephoto lens for your phone (2x or 3x) to get a closer view of Mars.
Step-by-Step
- Find the objects. Use a star chart app to locate Mars and the Beehive Cluster. Mars is a bright reddish “star” that moves through the zodiac. The Beehive (M44) is a faint, fuzzy patch in the constellation Cancer, roughly halfway between the bright stars Regulus and Pollux. In late spring and summer, both are visible in the evening sky—check the app for the exact time they rise in your location.
- Set up your phone. Mount the phone on the tripod or place it on a stable surface. If you have a clip-on telephoto lens, attach it now. Clean the lens with a microfiber cloth.
- Open the manual camera mode. On iPhone, use a third-party app like ProCamera or Halide. On Android, open the built-in camera app and switch to “Pro” or “Manual” mode (look for a gear icon or “Pro” tab).
- Set ISO and shutter speed. Start with ISO 800 and shutter speed 2 seconds. This is a good balance for capturing the cluster’s stars without too much noise. If your phone allows, set focus to manual and adjust it to infinity (the far distance icon). If not, tap on Mars to focus, then lock focus by holding the screen (on most phones).
- Compose the shot. If you want both objects in one frame, position Mars on one side and the Beehive on the other. If you’re using a telephoto lens, you’ll need to point directly at each target separately. Use the star chart app to confirm the cluster’s position—it looks like a small, hazy patch, not a bright star.
- Use a timer or remote. Set a 3-second or 10-second timer, or use a Bluetooth remote. This prevents camera shake from your finger pressing the shutter.
- Take the photo. Press the shutter and wait. Review the image. If the cluster is too dim, increase ISO to 1600 or 3200, or increase shutter speed to 4-5 seconds. If the stars are streaking, reduce shutter speed (Earth’s rotation causes trails after about 5-10 seconds, depending on zoom).
- Take multiple shots. Astrophotography is about trial and error. Take 5-10 shots with slightly different settings, then review them on your computer or phone screen.
- Edit the photo. Use a free editor like Snapseed or Lightroom Mobile. Increase contrast slightly, reduce highlights, and boost shadows to bring out the cluster’s stars. Be careful not to overdo it—Mars should stay a distinct red dot, not a white blob.
Common Mistakes
- Handheld shooting: Even a tiny shake will blur stars. Always use a tripod or a solid surface.
- Too high ISO: ISO 3200+ makes the image grainy and hides faint stars. Stick to ISO 800-1600.
- Shutter speed too long: With a telephoto lens, even 2 seconds can cause star trails. Use the “500 rule” roughly: 500 divided by the effective focal length (in mm) gives the max shutter speed in seconds. For a phone with 2x telephoto (≈50mm effective), that’s 10 seconds, but with 3x (≈75mm), it’s about 6.7 seconds.
- Autofocus on the wrong thing: If you tap on Mars, the camera may focus on the bright planet, making the cluster blurry. Use manual focus and set it to infinity.
- Light pollution: Streetlights and house lights wash out the cluster. Find a dark spot, even if it’s just a park away from direct lights.
- Not checking the forecast: Clouds, haze, or humidity can ruin the shot. Check a clear-sky chart or weather app.
Tips
- Shoot in RAW (if available): RAW files capture more data, giving you more editing flexibility.
- Use the widest lens: The main wide lens (0.5x on many phones) has a larger aperture and gathers more light, making the cluster easier to capture.
- Find the darkest sky: Use a light pollution map (like Blue Marble) to find a location with less artificial light. Even a 15-minute drive can make a big difference.
- Stack images: If you’re ambitious, take 10-20 shots and stack them using free software like DeepSkyStacker (Windows) or Sequator (Mac). This dramatically reduces noise and reveals more stars.
- Know the best time: Both Mars and the Beehive are best seen when they’re highest in the sky (around midnight in spring, earlier in summer). Check the app for the exact transit time.
- Use a moon filter (if the moon is out): A bright moon washes out faint objects. Shoot when the moon is below the horizon or wait for a new moon phase.
Troubleshooting
- Image is completely black: Increase ISO to 1600 or 3200, or increase shutter speed to 5-10 seconds. Also, check that the lens cap is off and the phone is not in night mode (which may stack automatically but can blur stars).
- Stars are streaking: Reduce shutter speed. If you’re using a telephoto lens, you need a shorter exposure. Also, make sure the tripod is stable—wind can shake it.
- Mars is a white blob: Mars is very bright compared to the cluster. Reduce ISO or shutter speed to prevent overexposure. You might need to take two separate shots: one for Mars (shorter exposure) and one for the cluster (longer exposure), then combine in editing.
- Beehive Cluster is invisible: It’s a faint object. Make sure you’re pointing at the right spot—use the star chart app. Increase ISO to 1600-3200 and shutter speed to 4-5 seconds. Also, consider driving to a darker location.
- Phone keeps refocusing: Lock focus by tapping and holding on the screen, or set focus to manual (infinity). If your phone doesn’t have manual focus, try using a camera app that does.
- Blurry images despite tripod: Use a remote shutter or timer. Also, check that the tripod is not on soft ground—use a hard surface.
Frequently Asked Questions
Can I see the Beehive Cluster with the naked eye?
Yes, under dark skies it appears as a faint, fuzzy patch. Through a phone camera, it will look like a small group of stars, not a bright cluster.
Why is Mars so bright?
Mars is relatively close to Earth compared to other planets, and its reddish color comes from iron oxide (rust) on its surface. Its brightness varies depending on its distance from Earth—it’s brightest near opposition.
Do I need a telescope to photograph them?
No, a phone with a good camera and a tripod can capture both. A telescope would give a closer view of Mars, but the Beehive Cluster is wide—it’s actually better with a wide field.
What is the best time of year to photograph them together?
They are both in the constellation Cancer, so they’re visible in the evening from late winter through summer in the Northern Hemisphere. The exact date varies, but check a star chart app for when they’re highest in the sky.
Why do my photos have so much noise?
High ISO and long exposures create noise. Try to keep ISO below 1600, and if you have a newer phone, use the “night mode” which stacks multiple exposures to reduce noise.
Can I use a regular camera app instead of manual mode?
Yes, but you’ll have less control. Try tapping on Mars to focus and then use the exposure slider to darken the image a bit to avoid overexposing. For the cluster, you may need to use “night mode” if available.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- How to Choose an Amplifier for Magico A3 Speakers
- How to Ban a Player from Your FiveM Server
- Pokemon Go Friend Codes: How to Add & Use Them33.33 XP/day
- Google Algorithm Change: Original Reporting Boost
- Create Folder for Selected Item on Mac: Full Guide
- Data Center Location Questions for AI Workloads