GPS tracking lets scientists follow wild predators and scavengers in near-real time, revealing where they hunt, how they find carcasses, and how they avoid each other. You attach a GPS collar or tag, collect location points over days or months, then analyze the movement paths and clusters. This guide walks through the standard workflow from collar deployment to behavioral interpretation.
What You’ll Need
- GPS collars or tags (with battery life matching your study duration)
- Capture and anesthesia equipment (if deploying on wild animals; requires permits and veterinary oversight)
- Data storage (cloud or local database) and a computer
- GIS software (QGIS, ArcGIS) or programming language (R, Python)
- Movement analysis packages (e.g., R packages: move, amt, ctmm)
- Optional: accelerometer data from the collar for behavior classification
Step-by-Step
- Define your research question and target species. Decide whether you’re studying hunting behavior, scavenging site use, or interspecies competition. This determines collar type (GPS-only vs. GPS+accelerometer), fix interval (e.g., 1 fix per minute for fine-scale movement vs. 1 per hour for home range), and study duration (weeks to years).
- Obtain permits and ethical approval. Work with your institution’s animal care committee and local wildlife agency. GPS collaring is invasive; you’ll need documentation of training and a clear justification for sample size.
- Capture and collar animals. Use species-specific methods (e.g., foot snares, darting, net guns). Fit the collar snugly but not tightly; ensure it will drop off (e.g., a drop-off mechanism) if the animal is never recaptured. Record the animal’s ID, sex, age, and health.
- Program the GPS unit. Set fix interval, data transmission schedule (if using satellite or cellular), and remote drop-off timer. Test the unit before deployment to ensure it acquires satellites quickly.
- Deploy and monitor. Release the animal at the capture site. Monitor the collar remotely for battery life, fix success rate, and signs of malfunction. If the animal moves into an area with poor GPS reception (dense forest, canyons), consider adjusting fix schedule.
- Download and clean data. Retrieve collars (via drop-off or recapture) or download remotely. Filter out erroneous points: locations with high horizontal dilution of precision (HDOP > 10), low satellite count (< 3), or unrealistic speeds (e.g., > 10 m/s for a running animal). Use a speed filter (e.g., the R package move has
speedFilter) to remove jumps. - Interpolate and regularize tracks. GPS fixes are often irregular due to missed fixes. Use a continuous-time movement model (e.g., ctmm) or simple linear interpolation to create a regular time series at your chosen interval. This is critical for calculating speed and turning angles.
- Identify behavioral states. Use hidden Markov models (HMMs) or random forests on movement metrics (step length, turning angle) and accelerometer data to classify behavior: resting, traveling, hunting, feeding. For scavengers, a cluster of points at a carcass site is a strong indicator of feeding.
- Detect kill or scavenging sites. For predators, look for clusters of points (e.g., > 5 points within 100 m over several hours) followed by a departure. For scavengers, clusters that coincide with known carcass locations (from other GPS data or remote cameras) indicate scavenging events. Validate with field visits or camera traps if possible.
- Analyze movement and space use. Calculate home ranges (e.g., using kernel density estimation or autocorrelated KDE), path tortuosity, and speed distributions. Compare movement patterns between periods (e.g., before/after a kill) and between species.
- Model interspecies interactions. Overlay GPS tracks of different species to quantify spatial overlap (e.g., utilization distribution overlap index). Use time-to-event analysis to see if a scavenger arrives at a kill site after the predator leaves.
- Validate and publish. Ground-truth a subset of GPS-derived behaviors (e.g., visit cluster sites to confirm kill vs. resting). Report fix success rates, error estimates, and sample sizes in your methods.
Common Mistakes
- Ignoring GPS error. Consumer-grade GPS has ~5-10 m error, which can misclassify a resting animal as feeding if you use a tight cluster threshold. Always account for error when defining clusters.
- Using too-frequent fixes for long studies. A 1-second fix interval drains batteries in days. Match fix rate to your question: fine-scale hunting needs 1-10 seconds, but home range only needs 1 fix per hour.
- Not accounting for habitat-induced fix bias. GPS fixes are less likely in dense cover, so your data may underrepresent time in forests. This biases habitat selection analyses.
- Treating all clusters as kills. Predators also rest at kill sites, but they may also rest at other locations. Use accelerometer data (if available) to distinguish feeding from resting.
- Overlooking autocorrelation. GPS fixes are not independent; using standard statistical tests without accounting for autocorrelation inflates significance. Use methods that assume correlated movement.
Tips
- Deploy collars on both predators and scavengers in the same area to study competition at carcasses.
- Combine GPS with camera traps at known carcass sites to validate scavenger visit times.
- Use accelerometer data to identify head-down feeding behavior, which is more reliable than location clusters alone.
- Store raw GPS data in a standard format (e.g., CSV with lat, lon, timestamp) to facilitate sharing and reanalysis.
- Perform a pilot study to test collar performance and fix intervals before committing to a large sample.
- Collaborate with a statistician early to design the study with enough power to detect behavioral differences.
Troubleshooting
- Many missed fixes. Check if the animal is in dense cover or if the collar antenna is damaged. Increase fix interval to save battery, or use a collar with a larger antenna. If fixes are missing during specific times (e.g., night), consider a schedule that matches activity.
- Battery drains too fast. Reduce fix frequency, use a schedule (e.g., only during active hours), or use a solar-powered collar if the species is diurnal and the collar is exposed to sun.
- Collar fails to drop off. Use a pre-programmed drop-off timer, but also include a remote release command. If the animal is recaptured, manually remove the collar.
- Data download fails. If using remote download, ensure the collar is within network range. For physical recovery, use VHF tracking to locate the dropped collar.
- Clusters are too large to identify kills. Use a clustering algorithm that considers time gaps (e.g., DBSCAN with a time epsilon) rather than a simple radius. Or use accelerometer data to pinpoint feeding bouts.
- Movement models fail to converge. This often happens with irregular data. Use a continuous-time model that handles missing fixes, or interpolate to a regular interval before fitting.
Frequently Asked Questions
How accurate is GPS for animal tracking? Consumer-grade GPS collars have an error of about 5-10 meters under open sky, but up to 30 meters in dense forest. Differential GPS or high-end collars can achieve sub-meter accuracy, but are heavier and more expensive.
Can GPS tell if an animal is hunting vs. scavenging? Not directly. You need to combine location clusters with accelerometer data or field validation. A cluster at a carcass with a predator’s signature (e.g., bite marks) indicates a kill, but a cluster at an already-dead animal indicates scavenging.
How long can GPS collars last? It depends on battery size, fix interval, and transmission. A typical collar with 1 fix per hour can last 6-12 months; with 1 fix per second, only days. Solar-powered collars can extend life indefinitely for diurnal species.
Do GPS collars affect animal behavior? Collars add weight and may cause initial stress. Studies show that most animals adapt within days, but you should use collars that are less than 3-5% of body weight and monitor for signs of injury.
What is the minimum sample size for a behavior study? It depends on the variability of behavior. For a pilot, 5-10 individuals per species can reveal patterns, but for robust statistical comparisons, 20-30 or more are often needed. Consult a statistician during design.
Can I use GPS data from public databases? Yes, many studies share GPS data on platforms like Movebank. You can download tracks of predators and scavengers to test hypotheses without field work, but ensure you cite the original data owners.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Samsung Unpacked August 5: 5 Devices Teased?
- Google Workspace Accounts Created Bypassing?
- Recover Deleted Screenshots on Mac: Full Guide
- Go vs Node.js: Cloudflare API Request Data
- ROG Phone 3 Certified Specs Leak: What’s Confirmed
- Clear Cache on a Philips Smart TV: Right Menu