keepcalculator

06 Numbers and Powers

How to Set and Read a GMT Watch Hand

Card No. 06·79659 · Updated · Standard formula, shown below

Setting and reading the GMT hand on a watch lets you track a second time zone, usually your home time, while you travel or work with people abroad. You’ll need a watch with a 24-hour hand (the GMT hand) and, ideally, a rotating bezel. This guide covers the two main types of GMT watches—those with an independent 24-hour hand and those with a jumping local hour hand—and explains how to set them correctly and read them at a glance.

What You’ll Need

  • A GMT watch (either a “caller” GMT with an independent 24-hour hand or a “flyer” GMT with a jumping local hour hand)
  • A small screwdriver or toothpick to press recessed pushers, if your watch has them
  • Access to the current time in your home time zone and the time zone you want to track (use a phone or computer)
  • Patience—avoid setting the date or GMT hand between 9 PM and 3 AM on watches without a quick-set date, to prevent damaging the movement

Step-by-Step

  1. Identify your GMT type. If your watch has a 24-hour hand that moves independently of the main hour hand, it’s a “caller” GMT. If the main hour hand can be set independently (by pulling the crown to the first position and turning it), you have a “flyer” GMT. This affects the setting procedure.
  2. Set the bezel to zero (if applicable). Rotate the bezel so the triangle or 24 marker at the 12 o’clock position is aligned with the minute track. This is the “home” position for most GMT bezels.
  3. Pull the crown to the time-setting position. For most watches, this is the second click out. For a “flyer” GMT, the first click is for the local hour hand, and the second click is for the main time.
  4. Set the GMT hand to your home time (or the second time zone). Rotate the crown until the 24-hour hand points to the correct hour on the 24-hour scale (usually on the bezel or the dial’s inner ring). For example, if your home time is 3 PM, set the GMT hand to 15. Note that the GMT hand moves in 24-hour increments, not 12.
  5. Set the main hour and minute hands to your local time. Continue rotating the crown to move the main hour hand (and minute hand) to the current local time. On a “flyer” GMT, you can set the main hour hand independently without moving the GMT hand or the minutes.
  6. Set the date (if needed). If your watch has a date, set it using the quick-set date feature (often a half-click position of the crown). Always check the AM/PM by rotating the hands past midnight to see if the date changes correctly.
  7. Push the crown back in. Press the crown gently back to the neutral position, then screw it down if it’s a screw-down crown (turn clockwise while pressing).
  8. Read the GMT hand. To read the second time zone, look at the 24-hour hand and read the hour against the 24-hour scale on the bezel or dial. The minute hand is shared with your local time, so the minutes are the same for both time zones.
  9. Use the bezel to track a third time zone (optional). Rotate the bezel to offset the 24-hour hand. For example, if you want to track a time zone 3 hours ahead of your home time, rotate the bezel 3 hours counterclockwise (or clockwise, depending on the bezel design). Then read the GMT hand against the bezel’s numbers.

Common Mistakes

  • Confusing AM/PM. The GMT hand only shows 24 hours, so 3 PM is 15, not 3. Forgetting this leads to a 12-hour error.
  • Setting the date during the danger zone. Changing the date between 9 PM and 3 AM can damage the date mechanism on many movements. Always set the time to a safe hour (like 6 AM) before adjusting the date.
  • Misaligning the bezel. If the bezel is rotated, the GMT hand will show a wrong time. Ensure the bezel is at zero unless you intentionally use it for a third time zone.
  • Setting the GMT hand to the wrong hour. On a “caller” GMT, the GMT hand is linked to the main hour hand, so if you set the main time first, the GMT hand moves with it. You must set the GMT hand first, then the main time.
  • Forgetting to account for half-hour time zones. Some time zones are offset by 30 or 45 minutes (e.g., India, Nepal). The GMT hand only shows hours, so you’ll need to add the minutes manually.

Tips

  • Practice with a known time. Before relying on it, set the GMT hand to your home time and verify it against a digital clock.
  • Use the 24-hour scale, not the hour markers. The GMT hand points to the 24-hour scale, not the regular 12-hour dial. On many watches, the 24-hour scale is on the inner ring or the bezel.
  • For flyer GMTs, set the minute hand first. When setting the local hour hand, the minutes stay fixed, so set the minutes with the main crown, then jump the hour hand forward or backward.
  • When traveling, update the local time on the main hand, not the GMT hand. The GMT hand should always stay on your home time for easy reference.
  • If your watch has a screw-down crown, unscrew it fully before pulling. Pulling before fully unscrewing can strip the threads.

Troubleshooting

  • The GMT hand doesn’t move when I set the main time. If you have a “flyer” GMT, the GMT hand is independent, so it won’t move with the main hour hand. That’s normal. If you have a “caller” GMT, ensure you’re pulling the crown to the correct position (the second click) and that the watch is not in a “hacking” mode where the seconds stop—the GMT hand should still move.
  • The date changes at noon instead of midnight. This means the hands are 12 hours off. Simply advance the hands 12 hours (past noon) to correct the AM/PM.
  • The GMT hand is off by an hour or more. Check that the bezel is at zero. If it is, re-set the GMT hand to the correct hour, ensuring you’re using the 24-hour scale.
  • The crown won’t screw back in. Press it in gently while turning clockwise. If it doesn’t catch, push it in fully and try again. Never force it.
  • The GMT hand moves when I set the date. This is normal on some movements—the date change can shift the GMT hand slightly. Re-check the GMT hand after setting the date.

Frequently Asked Questions

What is the difference between a GMT watch and a world time watch?

A GMT watch typically tracks two time zones (home and local) with a 24-hour hand. A world time watch displays 24 time zones on the dial, often with a rotating bezel and a city ring, letting you read the time in many cities at once.

Can I use the GMT hand for a time zone that is not my home time?

Yes. The GMT hand can be set to any time zone you choose. Many travelers set it to their home time, but you can set it to any reference time zone, like UTC or the time of a remote colleague.

Do I need to adjust the GMT hand when daylight saving time changes?

Yes. If your home time zone observes DST, you’ll need to move the GMT hand forward or back by one hour to match the current offset. Some travelers leave the GMT hand on standard time year-round and use the bezel to adjust for DST.

Why does my GMT watch have a 24-hour bezel?

The 24-hour bezel allows you to track a third time zone. By rotating the bezel, you can offset the GMT hand to read a different time zone without changing the hand’s position.

Is it safe to set the GMT hand backward?

Generally, yes. Most GMT movements allow you to set the GMT hand backward without damage. However, avoid moving the hands backward past midnight when the date is engaged, as this can stress the date mechanism.

What does “GMT” stand for?

GMT stands for Greenwich Mean Time, the time zone at the Prime Meridian (0° longitude). It’s often used as a reference for time zones worldwide, though UTC (Coordinated Universal Time) is now the standard.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →