keepcalculator

06 Numbers and Powers

Unlock Samsung Bootloader Before LineageOS

Card No. 06·75007 · Updated · Standard formula, shown below

Unlocking your Samsung device’s bootloader is a mandatory first step before you can install LineageOS or any custom ROM. This process removes Samsung’s software locks, allowing you to flash custom recovery and system images. It also voids your warranty and wipes all data, so back up everything important before you begin. This guide covers the exact steps for current Samsung Galaxy phones and tablets.

What You’ll Need

  • A Samsung Galaxy phone or tablet (the steps are the same for most models since 2019)
  • A USB cable that supports data transfer
  • A Windows, macOS, or Linux computer
  • Your Samsung account credentials (you’ll need to sign in on the device)
  • Patience: the process takes about 10–15 minutes and includes a forced restart

Step-by-Step

  1. Back up your data. Unlocking wipes your phone completely. Use Samsung Smart Switch, Google backup, or manually copy files to a computer. Remove your Google and Samsung accounts from the phone to avoid FRP (Factory Reset Protection) locks later.
  2. Enable Developer Options. Go to Settings > About phone > Software information and tap Build number seven times. You’ll see a toast message saying “You are now a developer!”
  3. Enable OEM unlocking. In Settings > Developer options, toggle OEM unlocking to ON. If the toggle is greyed out, connect to Wi-Fi and wait 24–72 hours (Samsung servers need to verify your device). If it’s missing entirely, your device may be carrier-locked or already unlocked.
  4. Power off the device. Press and hold the Power button, then tap Power off. Wait for the screen to go completely black.
  5. Boot into Download Mode. Press and hold Volume Up + Volume Down simultaneously, then plug the USB cable into the phone while it’s connected to your computer. Release the buttons when the blue screen appears. Press Volume Up to continue to Download Mode.
  6. Unlock the bootloader. In Download Mode, press and hold Volume Up for about 5–7 seconds. A warning screen will appear explaining that unlocking voids warranty and wipes data. Press Volume Up again to confirm. The phone will reboot automatically and erase everything.
  7. Complete the initial setup. After the reboot, the phone will be in a factory state. Go through the setup wizard, but do not sign in with a Samsung account yet. Skip Wi-Fi if possible, or use a network you trust. Once you reach the home screen, you’re ready to proceed with LineageOS installation.
  8. Verify the unlock. Go to Settings > About phone   > Software information and check that OEM unlocking is now permanently enabled (it will be greyed out). You can also reboot into Download Mode again—the screen should say “KG state: Prenormal” or “Unlocked” instead of “Checking…”

Common Mistakes

  • Skipping the backup. The wipe is irreversible. Many users lose photos and messages because they assumed the unlock wouldn’t erase data.
  • Not enabling OEM unlocking before booting to Download Mode. If you skip step 3, the bootloader unlock option won’t appear.
  • Using the wrong key combination. Samsung uses Volume Up + Volume Down for Download Mode on most models. Some older devices use only Volume Down. Check your specific model if the combo doesn’t work.
  • Holding the buttons too long. If you hold Volume Up for more than 10 seconds in Download Mode, the phone may reboot normally instead of unlocking.
  • Signing in with a Samsung account during setup. This can re-trigger FRP and cause issues later when flashing LineageOS.

Tips

  • Use the original USB cable or a high-quality third-party one. A faulty cable can cause the connection to drop mid-process.
  • Keep the phone charged above 50% before starting. The unlock process doesn’t take long, but a dead battery mid-way could brick the device.
  • If you’re on a carrier-locked phone (e.g., bought from Verizon or AT&T), the OEM unlock toggle may be permanently hidden. You’ll need to request an unlock from the carrier or use a different device.
  • After unlocking, you’ll see a warning screen every time you boot. This is normal and cannot be removed.
  • Write down your phone’s model number and region (e.g., SM-S918B/DS) before you start. You’ll need this to download the correct LineageOS build.

Troubleshooting

OEM unlocking toggle is greyed out. This usually means your device hasn’t been recognized by Samsung’s servers yet. Connect to Wi-Fi, sign in with a Samsung account (temporarily), and wait 24–72 hours. Keep checking the toggle daily.

OEM unlocking toggle is missing entirely. Your device is likely carrier-locked. Contact your carrier to request an unlock, or check if your model is known to be unlockable (e.g., international versions are usually fine).

Download Mode doesn’t appear. Make sure the phone is completely powered off (not just screen off). Try a different USB port on your computer, and hold the volume buttons before plugging in the cable.

The unlock confirmation screen doesn’t appear. You may have held Volume Up too long. Reboot into Download Mode again and try holding it for exactly 5 seconds.

Phone boots to a “Custom binary blocked by FRP” screen. This means FRP is still active. Go back to the setup, connect to Wi-Fi, and sign in with the Google account that was previously on the phone. Then repeat the unlock process.

After unlocking, the phone won’t boot past the Samsung logo. This is rare but can happen if the unlock partially failed. Try booting into Recovery Mode (Volume Up + Power) and doing a factory reset. If that fails, you may need to flash the stock firmware using Odin, then try again.

Frequently Asked Questions

Does unlocking the bootloader void my warranty? Yes, Samsung considers it a warranty violation. However, you can re-lock the bootloader by flashing stock firmware, which may restore warranty in some regions.

Will unlocking wipe my data? Yes, it performs a factory reset. Back up everything before you start.

Can I unlock the bootloader on a US carrier phone? Most US carrier models (Verizon, AT&T, T-Mobile) have the OEM unlock toggle hidden. Only factory-unlocked or international models can be unlocked.

How long does the unlock take? The actual process takes about 5 minutes, but you may need to wait 24–72 hours for the OEM unlock toggle to become available.

Is it safe to unlock the bootloader? It’s generally safe if you follow the steps correctly. The main risks are data loss and voiding warranty. There’s a small chance of bricking if you interrupt the process or flash incorrect files later.

Do I need to unlock the bootloader again after installing LineageOS? No, the bootloader stays unlocked until you re-lock it manually. You can flash LineageOS updates without re-unlocking.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →