keepcalculator

06 Numbers and Powers

Adding Extra Gigabit Ethernet Ports to Google Nest Wifi Pro

Card No. 06·84914 · Updated · Standard formula, shown below

Yes, you can add extra gigabit Ethernet ports to a Google Nest Wifi Pro, but the router itself has only one WAN port and one LAN port, so you’ll need a separate network switch to expand the number of wired connections. This article explains exactly what you need, how to set it up, and what to watch out for.

Why the Nest Wifi Pro Has So Few Ports

The Google Nest Wifi Pro (the 2nd-generation mesh system released in 2022) was designed as a purely wireless mesh system. Each unit has two 10/100/1000 Mbps Ethernet ports: one is labeled WAN (to connect to your modem or fiber ONT) and the other is LAN (to connect a single wired device). There is no built-in switch, unlike some competing routers that include 4 LAN ports. This design keeps the unit small and reduces cost, but it means if you want to wire multiple devices—a desktop PC, a NAS, a smart TV, a gaming console—you need to add your own switch.

What You Need to Add Ports

The simplest and most reliable solution is an unmanaged gigabit Ethernet switch. Here’s what to look for:

  • Port count: 5-port or 8-port switches are common. Choose one with at least as many ports as the number of wired devices you plan to connect, plus one uplink port to the router.
  • Speed: Make sure it supports 10/100/1000 Mbps (gigabit). A 100 Mbps switch would bottleneck your connection.
  • Form factor: Metal or plastic, desktop or wall-mountable—any is fine. Just ensure it has a power adapter (most do).
  • Managed vs. unmanaged: For home use, an unmanaged switch is plug-and-play. Managed switches offer VLANs and other features but are overkill for most people.

How to Connect the Switch

Adding a switch is straightforward. Follow these steps:

  1. Power off the Nest Wifi Pro router (optional but safe).
  2. Connect an Ethernet cable from the router’s LAN port (the port not labeled WAN) to any port on the switch. This is the uplink.
  3. Power on the switch and the router.
  4. Connect your wired devices (PC, TV, etc.) to the remaining switch ports using Ethernet cables.
  5. Wait a minute for the devices to get IP addresses from the router. They should appear in the Google Home app under the router’s client list.

That’s it. The switch works transparently—no configuration needed. The router treats all devices connected to the switch as if they were directly plugged into it.

Can You Use a Switch on the WAN Port?

No. The WAN port is specifically for connecting to your modem or ONT. If you plug a switch into the WAN port, the router won’t get an internet connection. The switch must go on the LAN side. If you need more than one device wired to the modem (e.g., a router and a separate device), you could put a switch between the modem and the router, but that’s not recommended because the router would then be behind a switch, and the modem’s single public IP would only be assigned to one device—the router. The other devices on the switch would not get internet unless your ISP provides multiple public IPs, which is rare for home service.

Common Problems and How to Avoid Them

Most issues with adding a switch are simple to fix:

  • No link light: Check the cable, try a different port on the switch, and ensure the switch is powered on.
  • Slow speeds: If you’re getting less than gigabit, verify the Ethernet cables are Cat5e or better. Also, some devices may only have 100 Mbps ports—check the device’s specs.
  • Devices not getting IP addresses: Power-cycle the switch and the router. If that fails, check if the router’s DHCP is enabled (it is by default).
  • Switch gets hot: Metal switches dissipate heat better. Ensure it’s in a ventilated area.

Switch vs. Using the Second Router’s LAN Port

If you have a second Nest Wifi Pro unit (as part of a mesh setup), you might wonder if you can use its LAN port to expand wired connections. Yes, you can. If the second unit is connected wirelessly to the main router, you can plug a device into its LAN port—it will work as a wireless bridge. However, this only gives you one extra port per unit. If you need more, you can also connect a switch to that second unit’s LAN port. This is a good way to get wired connections in another room without running cables through walls.

Cost and Performance Considerations

An unmanaged gigabit switch is inexpensive—typically $20 to $40 for a 5-port model. There’s no subscription fee. Performance-wise, a switch adds negligible latency (microseconds) and no speed penalty as long as it’s gigabit. The bottleneck will be your internet connection or the router’s routing throughput, not the switch. One thing to note: the Nest Wifi Pro’s LAN port is gigabit, so you’ll get full gigabit speeds to wired devices. If you have a faster internet plan (e.g., 2 Gbps), you won’t get that over a single Ethernet cable anyway—the router’s LAN port is limited to 1 Gbps.

Frequently Asked Questions

Does adding a switch slow down my network?

No. A gigabit switch operates at line speed and adds negligible latency. Your internet speed and Wi-Fi performance will be unaffected. The only time you’d see a slowdown is if the switch itself is 100 Mbps or if the cable is damaged.

Can I connect a switch to any of the Nest Wifi Pro’s ports?

Only the LAN port (the one not labeled WAN) is for connecting a switch. The WAN port must go to your modem. If you accidentally plug the switch into the WAN port, the router won’t get internet.

Will the Google Home app show devices connected to the switch?

Yes. The router sees all devices behind the switch as if they were directly connected. They’ll appear in the Google Home app under the router’s device list, and you can manage them normally.

Can I use a powerline adapter or MoCA instead of a switch?

Yes, but those are different solutions. A powerline adapter uses your electrical wiring to extend network access, and MoCA uses coaxial cables. They can be useful if you can’t run Ethernet, but they may have lower speeds or higher latency than a direct Ethernet cable. If you’re just looking to add ports in the same room as the router, a switch is the best choice.

What if I need more than 8 ports?

You can cascade switches—connect one switch to another. This works fine as long as you don’t create a loop (which can cause a broadcast storm). For home use, a single 16-port switch is simpler. Just ensure the total cable length from the router to the farthest device stays under 100 meters (328 feet).

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →