If you see “IPv4/IPv6: No Internet access” in your network status, your device is connected to the router but cannot reach the wider internet. This usually means the router’s DHCP isn’t handing out a valid IP address, or your ISP’s connection is down. The fixes below, in order, resolve the vast majority of these cases.
What This Error Actually Means
Windows and other operating systems show a network status like “IPv4: No Internet access” when the local network connection is up (you’re getting a link signal and often a valid local IP) but the device cannot reach a public server. The message is a symptom, not a diagnosis. It can appear for IPv4, IPv6, or both at once. When both show “No Internet access,” the problem is almost always upstream—either the router’s WAN connection or the ISP itself. When only one protocol fails, the issue is more likely a configuration or compatibility problem on your device or router.
Quick Fixes to Try First
These steps take under a minute each and solve many cases:
- Restart your modem and router: unplug both, wait 30 seconds, plug in the modem, wait for it to sync, then plug in the router.
- Restart your computer or phone—a simple reboot clears many temporary network glitches.
- Forget the Wi-Fi network on your device and reconnect, re-entering the password.
- Check if other devices in the house have internet. If they do, the problem is specific to your device.
- If you’re using Ethernet, try a different cable or port on the router.
How to Check Your IP Configuration
To see exactly what your device thinks is wrong, look at the IP settings. On Windows, open Command Prompt and type ipconfig /all. On macOS, go to System Settings → Network → your connection → Details. On Android, check Wi-Fi settings → your network → Advanced. What you’re looking for:
- An IPv4 address that starts with 169.254.x.x means your device couldn’t get an address from the router (APIPA). This is a DHCP failure.
- An IPv4 address like 192.168.x.x or 10.x.x.x means you have a local address, but the router may not have a WAN connection.
- An IPv6 address that starts with
fe80::is link-local only—normal if IPv6 isn’t provided by your ISP.
If your IPv4 is 169.254.x.x, the router’s DHCP server isn’t responding. Try releasing and renewing: in Command Prompt, type ipconfig /release then ipconfig /renew. If that fails, check the router’s DHCP settings.
Router and Modem Checks
The router is the bridge between your home network and the ISP. A common cause of “No Internet access” on all devices is that the router’s WAN port isn’t getting a signal from the modem. Check the router’s status page (usually at 192.168.1.1 or 192.168.0.1—the address is printed on the router). Look for:
- WAN IP address: if it’s all zeros or 0.0.0.0, the router hasn’t gotten a public IP from the modem.
- DNS settings: if they’re blank or wrong, the router may connect but not resolve domain names.
- Firmware update: an outdated router firmware can cause protocol-specific issues.
If the router’s WAN IP is 0.0.0.0, power-cycle both modem and router in the right order: modem first, then router after the modem shows a solid connection. If that doesn’t work, connect a computer directly to the modem (bypassing the router) and check if you get internet. If you do, the router is faulty or misconfigured. If you don’t, the problem is with the ISP.
IPv6-Specific Issues
IPv6 “No Internet access” is often less critical than IPv4 because many sites still work over IPv4. But if you need IPv6 (for some gaming, or if your ISP is IPv6-only), here’s what to check:
- Is IPv6 enabled on your router? Look for an IPv6 section in the router settings and ensure it’s set to “Native” or “Passthrough” (the exact term varies by router).
- Does your ISP actually provide IPv6? Many still don’t, or only to certain plans. Check their website or call support.
- On Windows, you can reset IPv6 with
netsh int ipv6 resetin an administrator Command Prompt, then restart. - Disable IPv6 temporarily to see if it’s causing a conflict. In Windows, uncheck “Internet Protocol Version 6 (TCP/IPv6)” in the network adapter properties.
If IPv4 works fine and only IPv6 shows “No Internet access,” it’s usually because your ISP doesn’t route IPv6 to your home yet. It’s not a problem you need to fix.
DNS and Adapter Settings
Sometimes the connection is fine but DNS resolution fails, which can appear as “No Internet access” because the OS can’t reach a known Microsoft or Google server. Try changing your DNS to a public resolver like 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare). On Windows: Settings → Network & Internet → Change adapter options → right-click your adapter → Properties → select IPv4 → Properties → use these DNS servers. On macOS: System Settings → Network → your connection → Details → DNS.
Also check that your adapter isn’t set to a static IP that’s wrong. If you’ve previously set a static IP, it may be out of the router’s DHCP range or conflicting with another device. Set it back to “Obtain an IP address automatically.”
When to Call Your ISP
If you’ve done all the above and still see “No Internet access” on all devices, the problem is almost certainly on your ISP’s side. Before calling, have this information ready:
- Your modem’s status lights (Power, Downstream, Upstream, Online).
- Whether the modem’s online light is solid or blinking.
- What you’ve already tried (restarts, direct connection, etc.).
ISPs can often remotely check your modem’s signal levels and will send a reset signal. If there’s an outage in your area, they’ll tell you. If your modem is very old (5+ years), it might not be compatible with your current plan—ask about that.
Frequently Asked Questions
What does “IPv4 no Internet access” mean on my phone?
On a phone, it means the Wi-Fi connection is established but the phone can’t reach the internet. The same fixes apply: restart the router, forget and rejoin the network, and check if other devices work. If only your phone has the issue, try turning off Wi-Fi and using mobile data for a moment, then back on.
Why do I have IPv6 no Internet access but IPv4 works?
This is usually because your ISP doesn’t provide IPv6, or the router’s IPv6 settings are misconfigured. It’s not a problem if IPv4 works—most content is still reachable via IPv4. You can ignore the IPv6 warning or disable IPv6 on your device to clean up the status message.
How do I fix “No Internet access” on Windows 11?
Run the Windows network troubleshooter (Settings → System → Troubleshoot → Other troubleshooters → Network Adapter), then try the steps in this article: restart router, release/renew IP, reset Winsock with netsh winsock reset in an admin Command Prompt, and update your network driver. If all fail, check the router’s WAN status.
Can a VPN cause “No Internet access”?
Yes. A VPN can conflict with your network adapter, especially if it uses a virtual adapter. Disconnect the VPN and see if internet returns. If it does, the VPN’s configuration is the issue—try a different server or protocol, or reinstall the VPN software.
Why does my Ethernet show “No Internet access” but Wi-Fi works?
This usually points to a faulty Ethernet cable, a damaged port, or a driver issue. Try a different cable and port. If that doesn’t help, update the Ethernet adapter driver in Device Manager. Also check if the Ethernet adapter has a static IP that conflicts with the router’s range.
What is the difference between “No Internet access” and “Unidentified network”?
“Unidentified network” means Windows can’t determine the network type (Public/Private), often due to a missing or incorrect gateway. “No Internet access” means it can’t reach the internet. Both often stem from the same root causes: DHCP failure, router misconfiguration, or ISP issues. The fixes are the same.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Samsung Smart Speaker Rollable Display: Facts
- HP 9730e: Wide Prints, Not A3 Scans
- What 8888 Does When You Use It as DNS Server
- Credential Manager: Seamless Sign-In Explained
- API Governance for Public Data: What Growing Portfolios Need
- Enterprise AI Hidden Cost: Data Architecture ROI