Limb darkening laws are mathematical functions used to describe how a star’s brightness decreases from its center to its edge (limb), and the linear, quadratic, and four-parameter (Claret) models differ in how many coefficients they use to fit this profile. You enter the limb angle (μ, the cosine of the angle between the line of sight and the stellar radius) and the law’s coefficients, and the calculator returns the relative intensity at that point. The simplest linear law works for rough estimates, while the quadratic and four-parameter forms provide progressively better fits for precise light-curve modeling.
Formula
All limb darkening laws express the specific intensity I(μ) as a fraction of the central intensity I(1), where μ = cos(θ) and θ is the angle between the line of sight and the normal to the stellar surface. At the center, μ = 1; at the limb, μ = 0.
Linear law: I(μ) = 1 − c₁(1 − μ)
Quadratic law: I(μ) = 1 − c₁(1 − μ) − c₂(1 − μ)²
Four-parameter (Claret) law: I(μ) = 1 − c₁(1 − μ) − c₂(1 − μ)² − c₃(1 − μ)³ − c₄(1 − μ)⁴
Here, c₁, c₂, c₃, c₄ are dimensionless coefficients that depend on the star’s effective temperature, surface gravity, metallicity, and the observed wavelength band. The coefficients are usually positive and sum to less than 1 to keep intensity positive across the disk.
Worked Example
Using the default values from the calculator: μ = 0.5, c₁ = 0.6, c₂ = 0.2, c₃ = 0.1, c₄ = 0.05.
- Linear: I = 1 − 0.6 × (1 − 0.5) = 1 − 0.6 × 0.5 = 1 − 0.3 = 0.7000
- Quadratic: I = 1 − 0.6 × 0.5 − 0.2 × (0.5)² = 1 − 0.3 − 0.2 × 0.25 = 1 − 0.3 − 0.05 = 0.6500
- Four-parameter: I = 1 − 0.6 × 0.5 − 0.2 × 0.25 − 0.1 × 0.125 − 0.05 × 0.0625 = 1 − 0.3 − 0.05 − 0.0125 − 0.003125 = 0.6344
The calculator rounds to 4 decimals, giving 0.7000, 0.6500, and 0.6344 respectively.
Background: Why Limb Darkening Exists
Limb darkening is an optical effect observed in stars like the Sun. When you look at the center of a star’s disk, you see deeper, hotter layers; at the limb, your line of sight passes through cooler, higher layers at a slant, so the emitted light is dimmer and redder. This effect was first described quantitatively in the early 20th century as astronomers began modeling stellar atmospheres. The exact shape of the darkening depends on how opacity varies with depth, which in turn depends on temperature, density, and chemical composition.
For exoplanet transit studies, limb darkening directly affects the shape of the transit light curve—the dip in brightness as a planet crosses the stellar disk. A star that is strongly limb-darkened produces a U-shaped transit, while a uniformly bright star produces a flat-bottomed transit. Accurate limb darkening coefficients are therefore essential for measuring exoplanet radii, orbital parameters, and even atmospheric properties.
How the Models Compare
The linear law is the simplest, with a single coefficient. It captures the overall trend but fails to reproduce the steep darkening near the limb (μ close to 0) that real stars show. The quadratic law adds a second coefficient, which improves the fit significantly, especially for main-sequence stars in optical bands. The four-parameter law, introduced by Antonio Claret in 2000, adds third and fourth powers, allowing an even closer match to model atmospheres across a wider range of wavelengths and stellar types.
- Linear: 1 coefficient, good for rough approximations or when coefficients are not well known.
- Quadratic: 2 coefficients, the most common choice in modern transit modeling (e.g., in exoplanet fitting codes like BATMAN).
- Four-parameter: 4 coefficients, best for high-precision space photometry (e.g., Kepler, TESS) where subtle deviations matter.
In practice, the quadratic law often performs nearly as well as the four-parameter law for most stars, which is why it remains popular. The four-parameter law shines in cases where the stellar atmosphere is unusual—very cool, very hot, or observed in ultraviolet or infrared bands where opacity gradients are steeper.
How to Choose the Right Law
Your choice depends on the precision you need and the data you have. If you are analyzing a single transit with ground-based photometry (noise ~1%), the linear or quadratic law is sufficient. For space-based missions with parts-per-million precision, use the four-parameter law if you have reliable coefficients. Also consider the wavelength: in optical bands, quadratic usually works; in infrared, higher-order terms become important.
To obtain coefficients, you can use tables published in the literature (e.g., Claret’s tables for various stellar models) or compute them using ATLAS or PHOENIX model atmospheres. Many fitting tools allow you to fit the coefficients directly from the light curve, but that introduces degeneracies with other parameters, so it’s often better to fix them to theoretical values.
Common Mistakes and Misconceptions
One common mistake is using coefficients from a different wavelength band than your observation. Limb darkening is strongly wavelength-dependent: a star appears more limb-darkened in blue light than in red. Always match the coefficients to your filter or bandpass.
Another misconception is that the linear law is always worse than the quadratic. For some stars and wavelengths, the linear law can actually fit better than the quadratic if the quadratic coefficients are poorly chosen. The extra terms can overfit noise if you’re not careful.
Also, remember that μ is the cosine of the angle, not the angle itself. At the limb, μ = 0, and the intensity should approach zero, but the laws often give a small positive value because the real intensity at the limb is not exactly zero—it’s just very low. Don’t force the model to go to zero.
Limitations of the Models
All these laws are empirical approximations. They assume a plane-parallel atmosphere and isotropic scattering, which is not true for stars with extended atmospheres, strong stellar winds, or significant rotation. For such stars, more complex models (e.g., spherical atmospheres) are needed. Also, the coefficients are typically computed for static, non-magnetic stars; spots and faculae can alter the local limb darkening.
In exoplanet transits, limb darkening is degenerate with the planet’s radius and impact parameter. If you use wrong coefficients, you’ll get biased radius measurements. The four-parameter law reduces this bias but doesn’t eliminate it. Always check the residuals of your fit to see if the chosen law is adequate.
Frequently Asked Questions
What is μ in limb darkening?
μ is the cosine of the angle between the line of sight and the outward normal to the stellar surface. At the center of the disk, μ = 1; at the edge (limb), μ = 0. It’s a geometric factor that determines how much atmosphere you’re looking through.
Why is the quadratic law more popular than the four-parameter?
The quadratic law has only two coefficients, which are easier to fit and less prone to overfitting. For most stars and wavelengths, it matches the true limb darkening within a few percent, which is sufficient for typical transit observations. The four-parameter law is reserved for high-precision work where the extra accuracy justifies the complexity.
Can I use the same coefficients for different wavelengths?
No. Limb darkening varies strongly with wavelength. You need coefficients computed for the specific bandpass of your instrument (e.g., Kepler’s broad band, TESS’s band, or a narrow filter). Using coefficients from a different wavelength will introduce systematic errors in your light curve model.
How do I get limb darkening coefficients for my star?
You can look up published tables (e.g., Claret & Bloemen 2011) that list coefficients for different stellar parameters (Teff, log g, [Fe/H]) and photometric bands. Alternatively, you can compute them using stellar atmosphere codes like ATLAS or PHOENIX, or use online tools that generate coefficients on demand.
What happens if I use the linear law when the quadratic is needed?
You’ll get a biased estimate of the planet’s radius and other transit parameters. The linear law tends to underestimate the darkening near the limb, which makes the transit appear shallower and wider than it actually is. The bias is small for low-precision data but can be significant for space-based photometry.
Are there other limb darkening laws besides these three?
Yes, there are several others, including the power-2 law (I = 1 − c(1 − μ^α)), the logarithmic law (I = 1 − c₁(1 − μ) − c₂ μ ln μ), and the nonlinear law (I = 1 − c₁(1 − μ^(1/2)) − c₂(1 − μ) − c₃(1 − μ^(3/2)) − c₄(1 − μ²)). These are less common but can be useful for specific stellar types or wavelengths.
Related
Formula used
in mu | μ (cos angle) | - | 0.5 | 0 | 1 in c1 | Linear coefficient c1 | - | 0.6 | 0 | 1 in c2 | Quadratic coefficient c2 | - | 0.2 | 0 | 1 in c3 | 3rd coefficient c3 | - | 0.1 | 0 | 1 in c4 | 4th coefficient c4 | - | 0.05 | 0 | 1 out I_lin | Linear intensity | - | 1 - c1 * (1 - mu) | 4 out I_quad | Quadratic intensity | - | 1 - c1 * (1 - mu) - c2 * (1 - mu)^2 | 4 out I_4param | 4-parameter intensity | - | 1 - c1 * (1 - mu) - c2 * (1 - mu)^2 - c3 * (1 - mu)^3 - c4 * (1 - mu)^4 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Skip Ryobi and Milwaukee? Harbor Freight Tools to Buy
- Funny Subreddits That Make You Laugh
- Why Retro Gaming Is Still Worth Playing Today
- Neptune Facts That Will Blow Your Mind
- Survival Crafting Game Fatigue: Why & How to Fix It
- Sell Your EV Now Before Prices Plummet?