Mac multi-touch gestures let you control your Mac with swipes, pinches, and taps on the trackpad or Magic Mouse, replacing many mouse clicks and keyboard shortcuts. This article explains every built-in gesture, how to customize them, and how to troubleshoot when they stop working.
What Are Multi-Touch Gestures?
Multi-touch gestures are predefined movements you make with one or more fingers on a trackpad or a Magic Mouse. The Mac’s trackpad (and the Magic Mouse’s top surface) detects the position and movement of your fingers and translates them into actions. These gestures are designed to speed up navigation, window management, and app switching so you can do more without reaching for the keyboard or a menu.
Gestures work system-wide in macOS, and many apps add their own custom gestures. For example, in Safari, a two-finger swipe left or right goes back or forward in history, while in Photos, the same swipe moves between photos. The system gestures are consistent across most apps, but some apps override or extend them.
The Complete List of Built-in Gestures
Here are the default gestures on a MacBook trackpad or Magic Trackpad. (Magic Mouse supports a subset, noted below.)
- Tap to click: Lightly tap the trackpad with one finger to click. This is optional and can be enabled in System Settings.
- Secondary click (right-click): Click with two fingers, or hold Control and click with one finger. On Magic Mouse, click the right side.
- Scroll: Slide two fingers up or down to scroll. On Magic Mouse, slide one finger up or down.
- Smart zoom: Double-tap with two fingers to zoom in and out of a webpage or PDF. On Magic Mouse, double-tap with one finger.
- Zoom in/out: Pinch two fingers together or apart to zoom in apps like Photos, Pages, or Maps.
- Rotate: Rotate two fingers around each other to rotate an image or document in supporting apps.
- Swipe between pages: Swipe left or right with two fingers to go back or forward in Safari, Finder, and other apps.
- Swipe between full-screen apps: Swipe left or right with three fingers (or four, depending on settings) to switch between full-screen apps and Spaces.
- Mission Control: Swipe up with three or four fingers to open Mission Control, showing all open windows and Spaces.
- App Exposé: Swipe down with three or four fingers to see all windows of the current app.
- Launchpad: Pinch with thumb and three fingers to open Launchpad, where you can see and launch all apps.
- Show Desktop: Spread with thumb and three fingers to move all windows aside and reveal the Desktop.
- Notification Center: Swipe left from the right edge with two fingers to open Notification Center (on older macOS versions). On newer versions, click the date/time in the menu bar.
- Look up & data detectors: Tap with three fingers (or force-click, if supported) on a word or a date to look it up in the dictionary or get a preview.
- Drag with three fingers: Move three fingers to drag a window or item (must be enabled in Accessibility settings).
On Magic Mouse, only a few gestures work: scroll, secondary click, smart zoom, and swipe between pages. The multi-finger gestures (Mission Control, Launchpad, etc.) are not available because the mouse only detects one finger at a time on its surface.
How to Customize Gestures
You can turn gestures on or off and change how many fingers are required. Go to System Settings (or System Preferences on older macOS) and click Trackpad. You’ll see three tabs: Point & Click, Scroll & Zoom, and More Gestures.
- Point & Click: Enable or disable Tap to click, Secondary click (choose two-finger click or click in bottom right corner), and Look up & data detectors.
- Scroll & Zoom: Toggle natural scrolling (content moves with your fingers), smart zoom, and pinch to zoom.
- More Gestures: Here you can set the number of fingers for swipe between pages, swipe between full-screen apps, Mission Control, App Exposé, Launchpad, and Show Desktop. Options are usually “two fingers”, “three fingers”, or “four fingers” (depending on the gesture).
If you have a Magic Mouse, the same settings appear under Mouse in System Settings, but with fewer options.
For advanced customization, third-party apps like BetterTouchTool allow you to create custom gestures or assign new actions to existing ones. However, the built-in settings cover most needs.
Common Problems and Fixes
Sometimes gestures stop working or behave unexpectedly. Here are the most common issues and how to fix them.
- Gestures not working at all: Check if the trackpad is disabled in System Settings > Trackpad. Also, try restarting your Mac or resetting the NVRAM (on Intel Macs) by restarting and holding Option+Command+P+R until you hear the startup sound twice.
- Tap to click not working: Make sure it’s enabled in System Settings > Trackpad > Point & Click. If it still doesn’t work, try adjusting the tracking speed or cleaning the trackpad.
- Three-finger drag not working: This is disabled by default. Enable it in System Settings > Accessibility > Pointer Control > Trackpad Options > Enable dragging > “three finger drag”.
- Gestures work but are too sensitive: You cannot adjust gesture sensitivity directly, but you can try using a slower, more deliberate movement. Some third-party apps can adjust sensitivity.
- Magic Mouse gestures not working: Ensure the mouse is charged and connected. On the Magic Mouse, only one-finger gestures work (scroll, secondary click, smart zoom, page swipe). Multi-finger gestures are not supported.
- After a macOS update, gestures changed: Apple occasionally changes default gestures or adds new ones. Check System Settings > Trackpad to see the current options and re-enable any that were reset.
If you’ve tried these and gestures still fail, try resetting the trackpad by going to System Settings > Trackpad and toggling each option off and on. If the trackpad is physically damaged, you may need service.
Magic Mouse vs. Trackpad: Which Has More Gestures?
The Magic Trackpad supports all gestures listed above, including multi-finger swipes and pinches. The Magic Mouse only supports a small subset because it has a multi-touch surface but only detects one finger at a time. On the Magic Mouse, you can scroll, secondary-click, smart zoom, and swipe between pages, but you cannot use Mission Control, Launchpad, or Show Desktop gestures. If you rely heavily on gestures, a trackpad (built-in or Magic Trackpad) is far more capable.
Tips for Learning and Using Gestures Effectively
To get the most out of gestures, practice them in a low-pressure app like Finder. Start with the most common ones: two-finger scroll, two-finger tap for right-click, and three-finger swipe up for Mission Control. Once those feel natural, add the pinch to zoom and the four-finger swipe between full-screen apps.
You can also use the Force Touch trackpad (on MacBook Pro 2016 and later, and Magic Trackpad 2) to press harder for additional actions, like looking up words or previewing files. This is not a gesture per se, but it complements them.
If you find gestures interfere with your work (e.g., accidental swipes), you can turn off specific gestures in System Settings. For example, if you often trigger Mission Control by accident, change the swipe to four fingers or disable it entirely.
Frequently Asked Questions
How do I enable three-finger drag on my Mac?
Go to System Settings > Accessibility > Pointer Control > Trackpad Options, then check “Enable dragging” and select “three finger drag”. This allows you to move windows and items by dragging with three fingers anywhere on the trackpad, without clicking and holding.
Why aren’t my swipe gestures working in Safari?
First, ensure “Swipe between pages” is enabled in System Settings > Trackpad > More Gestures. If it is, try restarting Safari or your Mac. Also, make sure you’re swiping with two fingers (or the number you set) horizontally, not vertically. If you use a Magic Mouse, swipe with one finger.
Can I add custom gestures on a Mac?
Yes, but not with built-in settings. You need a third-party app like BetterTouchTool, which lets you create custom gestures (e.g., a specific swipe pattern) and assign them to actions like opening an app or executing a keyboard shortcut. These apps are not free, but many offer trial versions.
Do all Macs support multi-touch gestures?
All Macs with a built-in trackpad (MacBook, MacBook Air, MacBook Pro) support the full set of gestures. The Magic Trackpad also supports all gestures. The Magic Mouse supports only a limited set (scroll, secondary click, smart zoom, page swipe). Older Macs with a non-Force Touch trackpad may not support Force Touch, but they still support all the standard gestures.
How do I reset my trackpad gestures to default?
Go to System Settings > Trackpad and manually re-enable each option you want. There is no one-click “reset” button, but you can toggle each setting off and on. If you want to completely reset all trackpad settings, you can delete the file com.apple.AppleMultitouchTrackpad.plist in ~/Library/Preferences (while the Mac is not using it), but it’s easier to just adjust the settings manually.
Why does my Mac not respond to pinch-to-zoom gestures?
Pinch-to-zoom only works in apps that support it, like Photos, Preview, and Safari (for webpages). In Safari, pinch to zoom works only if the webpage supports zooming (most do). If it doesn’t work, check that “Pinch to zoom” is enabled in System Settings > Trackpad > Scroll & Zoom. Also, try a slower pinch or make sure you’re not accidentally triggering a different gesture.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Luxury V6 Sports Sedan: Can It Easily Top 100k Miles?
- Puppets in TV Shows: Classic Proof They’re Better
- Best Streaming Remote: Top Picks for Every Setup
- Claude Pro Hidden Features Power Users Try
- Tesla Rental Prices: Why They’re So Low255.00 USD
- Best Family Western Movies to Stream Right Now