keepcalculator

06 Numbers and Powers

Mac Startup Options: Full Guide to Key Combos

Card No. 06·76606 · Updated · Standard formula, shown below

Mac startup options are keyboard combinations or system settings you use at boot to troubleshoot, choose a startup disk, enter recovery mode, or run diagnostics. This article explains every standard startup key combination for current Macs (Apple silicon and Intel), what each one does, and how to use them safely.

What Are Mac Startup Options?

When you press the power button on a Mac, the firmware (either Apple’s bootloader on Apple silicon or the Intel EFI on older models) checks for a startup disk and begins loading macOS. Startup options interrupt that normal process, letting you pick a different boot volume, enter recovery tools, or run hardware tests. On Apple silicon Macs, you access these options by pressing and holding the power button; on Intel Macs, you hold a specific key combination immediately after pressing the power button.

Apple Silicon vs. Intel: The Key Difference

Since 2020, Macs with Apple silicon (M1, M2, M3, and later) use a different startup process than older Intel models. The most important difference is that Apple silicon Macs do not use the classic key combinations like Command+R or Option at boot. Instead, you hold the power button to enter Startup Options, then choose from a graphical menu. Intel Macs still support the traditional key combos, though Apple has been phasing them out as older models are discontinued.

How to Enter Startup Options on Apple Silicon

On any Mac with Apple silicon (M1 or newer), follow these steps:

  1. Shut down your Mac completely (Apple menu > Shut Down).
  2. Press and hold the power button (Touch ID button) until you see “Loading startup options” on the screen.
  3. Release the button. You’ll see a window with your startup disks and a gear icon labeled “Options.”
  4. Click the disk you want to start from, or click Options to enter macOS Recovery.

If you have multiple volumes, you can also select a startup disk here and click the arrow under it. To start from a different disk permanently, use System Settings > General > Startup Disk after booting.

Intel Mac Startup Key Combinations

For Intel Macs, you press and hold one of these keys immediately after pressing the power button (or after the startup chime, if you hear one):

  • Option (Alt) – Shows the Startup Manager, letting you choose a startup disk.
  • Command (⌘) + R – Starts macOS Recovery (the built-in recovery system).
  • Option + Command + R – Starts macOS Recovery over the internet (downloads the latest compatible macOS).
  • Shift – Starts in Safe Mode, which disables unnecessary extensions and runs a disk check.
  • D – Starts Apple Diagnostics to test hardware.
  • Option + D – Starts Apple Diagnostics over the internet.
  • Command + V – Verbose mode, showing detailed log messages during boot.
  • Command + S – Single-user mode (for advanced troubleshooting, mostly deprecated in recent macOS).
  • N – NetBoot (rarely used, requires a network boot server).
  • Command + Option + P + R – Resets the NVRAM (non-volatile RAM) on older Intel Macs. This was removed on Apple silicon and on Intel Macs from 2016 or later.

Note: Some combinations only work on certain macOS versions or hardware. For example, Command+S is not available in macOS Catalina or later on most Macs.

macOS Recovery Options Explained

macOS Recovery is the most commonly used startup option because it lets you reinstall macOS, restore from Time Machine, use Disk Utility, and run Terminal commands. On Apple silicon, you enter it by holding the power button and clicking Options. On Intel, use Command+R.

Once in Recovery, you’ll see a window with these tools:

  • Restore from Time Machine – Recover your system from a backup.
  • Reinstall macOS – Install a fresh copy of the operating system without erasing your data (if you choose that option).
  • Safari – Browse the web for help or download tools (in some versions).
  • Disk Utility – Repair or erase disks.
  • Terminal – Run command-line utilities.

If you use Option+Command+R on Intel, macOS Recovery will attempt to download the latest compatible version of macOS from the internet. This can be slower but is useful if your local recovery partition is damaged.

Safe Mode and Its Uses

Safe Mode (Shift on Intel, or selecting Safe Mode in Startup Options on Apple silicon) starts your Mac with only essential extensions and performs a basic disk check. It’s the first thing to try if your Mac won’t boot normally, or if you suspect a third-party extension or login item is causing problems. In Safe Mode, your Mac may run slower and the resolution may be lower, but that’s normal. To exit Safe Mode, simply restart your Mac normally.

Common Problems and Solutions

If a startup option doesn’t work, try these fixes:

  • Key combination not responding: Make sure you press the key immediately after pressing the power button, and hold it for at least 2-3 seconds. On some Intel Macs, you need to press it before the chime.
  • Apple silicon shows a question mark folder: This means macOS can’t find a startup disk. Enter Startup Options and select your disk, or use Disk Utility to repair it.
  • Recovery won’t load: Try Internet Recovery (Option+Command+R on Intel). If that fails, you may need to create a bootable USB installer using another Mac.
  • Forgot your firmware password: If a firmware password is set, you’ll be prompted to enter it before using any startup options. If you forgot it, you’ll need to contact Apple Support for help.

Frequently Asked Questions

How do I choose a startup disk on a Mac?

On Apple silicon, hold the power button until you see Startup Options, then click the disk you want. On Intel, hold Option during boot to open the Startup Manager, then select a disk with the arrow keys and press Return. You can also set a default startup disk in System Settings > General > Startup Disk.

What does Command+R do on a Mac?

On Intel Macs, Command+R opens macOS Recovery, where you can reinstall macOS, use Disk Utility, or restore from Time Machine. On Apple silicon, you hold the power button and click Options to get the same recovery environment.

How do I boot a Mac in Safe Mode?

On Intel, press and hold Shift during boot. On Apple silicon, hold the power button, click Options, then select your startup disk and hold Shift while clicking “Continue in Safe Mode.” Safe Mode is useful for troubleshooting startup issues.

Is it safe to try different startup key combinations?

Yes, most startup options are harmless. The only ones that can change data are those that involve erasing or reinstalling (like Disk Utility or Reinstall macOS), so be careful with those. Resetting NVRAM on older Intel Macs is also safe, but it resets some settings like volume and display resolution.

Why doesn’t my Mac respond to startup keys?

If you have an Apple silicon Mac, key combinations like Command+R won’t work because they’re not supported. On Intel, make sure you press the key right after the power button, and try a wired keyboard if you’re using Bluetooth. Also, disable FileVault temporarily if you have it enabled, as it may delay the startup process.

Can I use startup options to reset a forgotten password?

Yes, you can use macOS Recovery to reset a login password, but only if you know the Apple ID password for the account (on newer macOS versions) or if you have a firmware password disabled. On Apple silicon, you can also use Recovery to erase the Mac, which removes the password but also all data.

Safety and Precautions

Before using any startup option that modifies your system (like reinstalling macOS or erasing a disk), back up your important files with Time Machine or another method. Also, ensure your Mac is plugged into a power source during recovery or diagnostics to avoid interruption. If you’re unsure about a specific option, look it up in Apple’s official documentation or consult Apple Support.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →