Mac trackpad gestures are multi-finger swipes, taps, and pinches that let you navigate macOS without a mouse. This guide lists every built-in gesture, shows where to enable or disable each one, and explains how to adjust sensitivity and fix common problems.
Why Mac Trackpads Have Gestures
Apple introduced multitouch trackpads on the MacBook in 2008 and later brought the same technology to the Magic Trackpad for desktop Macs. The trackpad senses the position and movement of one or more fingers simultaneously, and macOS interprets those patterns as commands. Gestures are designed to reduce the number of clicks and menu visits for common tasks like switching apps, opening Mission Control, and zooming into web pages.
Unlike a traditional mouse, a trackpad has no physical buttons on modern Macs (the whole surface clicks). Gestures replace many keyboard shortcuts and toolbar buttons, which is why learning them can significantly speed up daily work. The same gestures work on a MacBook’s built-in trackpad and on the external Magic Trackpad, though some older third-party trackpads may not support all of them.
Complete List of Default Gestures
These are the standard gestures in current macOS versions (Ventura and later). If a gesture doesn’t work, check the settings section below because some are turned off by default.
- Click – press anywhere on the trackpad. This is a left-click.
- Secondary click (right-click) – click with two fingers, or hold Control and click. You can also set the bottom-right or bottom-left corner as a right-click zone.
- Smart zoom – double-tap with two fingers to zoom in and out of a web page or PDF. This is different from the pinch zoom.
- Scroll – slide two fingers up or down to scroll. Slide left or right to scroll horizontally.
- Zoom in/out – pinch with two fingers to zoom in or out of content like photos, PDFs, and web pages.
- Rotate – twist two fingers to rotate an image or PDF page. Works in apps that support rotation.
- Swipe between pages – swipe two fingers left or right to go back or forward in Safari, Finder, and other apps with page history.
- Mission Control – swipe up with three fingers to open Mission Control, which shows all open windows and desktops.
- App Exposé – swipe down with three fingers to show all windows of the current app.
- Launchpad – pinch with thumb and three fingers to open Launchpad, where all your apps are displayed.
- Show Desktop – spread with thumb and three fingers to move all windows aside and reveal the desktop.
- Switch between full-screen apps – swipe left or right with three fingers to move between full-screen apps or Spaces.
- Notification Center – swipe left with two fingers from the right edge of the trackpad (on a Magic Trackpad) or swipe with two fingers from the right edge (on a MacBook). This gesture is often disabled by default.
- Look up & data detectors – tap with three fingers on a word or a detected item like an address or phone number to see a preview.
How to Enable or Disable Gestures
You can turn each gesture on or off individually, and you can change the direction of scrolling and the action for some swipes.
- Open System Settings (or System Preferences on older macOS).
- Click Trackpad.
- You’ll see three tabs: Point & Click, Scroll & Zoom, and More Gestures.
- In each tab, check or uncheck the box next to a gesture to enable or disable it.
- For some gestures, like “Swipe between pages,” you can choose the exact action from a dropdown menu (e.g., “Swipe with two or three fingers” or “Swipe with three fingers”).
If you change a gesture and don’t like it, you can reset all trackpad settings by clicking the “Reset” button (if available) or by manually re-enabling each option.
Adjusting Tracking Speed and Sensitivity
Three settings affect how your trackpad feels:
- Tracking speed – how fast the cursor moves across the screen relative to your finger movement. A faster setting means less finger travel.
- Click pressure – how hard you need to press for a click. On Force Touch trackpads, you can choose “Light,” “Medium,” or “Firm.”
- Scroll direction – by default, scrolling up moves content up (natural scrolling, like on a phone). You can turn this off to get traditional “mouse-style” scrolling where scrolling up moves the page down.
To change these, go to System Settings → Trackpad. The tracking speed slider is at the top. Click pressure is under “Point & Click.” Scroll direction is in “Scroll & Zoom.”
Common Problems and Fixes
If a gesture stops working, try these in order:
- Check the gesture is enabled – open System Settings → Trackpad and confirm the box is checked.
- Restart the app – some apps override system gestures. Quit and reopen the app.
- Restart your Mac – a temporary software glitch can disable gestures.
- Reset the trackpad settings – go to System Settings → Trackpad → Reset (if available) or manually toggle each gesture off and on.
- Check for stuck keys – if you have a keyboard connected, a stuck modifier key (like Control) can change what a tap does.
- Update macOS – Apple sometimes fixes trackpad bugs in system updates.
- Clean the trackpad – dirt or moisture can interfere with the capacitive sensor. Wipe with a soft, dry cloth.
If gestures work in some apps but not others, the app itself may be ignoring them. For example, some remote desktop apps (like Microsoft Remote Desktop) capture the trackpad input for the remote computer, so gestures control the remote system, not your Mac.
Force Touch vs. Standard Trackpads
MacBook models from 2015 onward and the Magic Trackpad 2 have Force Touch. These trackpads don’t physically move; they use haptic feedback to simulate a click. Force Touch adds one extra gesture: Force click (press harder after a click). Force click does different things depending on the app:
- In Safari, force-click a link to see a preview of the page.
- In Finder, force-click a file name to rename it.
- In Maps, force-click a location to drop a pin.
- In Mail, force-click a message to preview it.
You can adjust the pressure required for a force click in System Settings → Trackpad → Point & Click → “Force Click and haptic feedback.” If you don’t like it, you can turn it off entirely.
Older MacBooks (before 2015) and the original Magic Trackpad have a physical click mechanism and do not support force click. They still support all the multi-finger gestures listed above.
Customizing Gestures with Third-Party Apps
If the built-in gestures aren’t enough, you can use free or paid apps to create custom gestures. Two popular options are BetterTouchTool and BetterSnapTool. These apps let you assign any action (like a keyboard shortcut, menu command, or app launch) to a specific gesture. For example, you could set a four-finger tap to open Spotlight or a five-finger swipe to lock your screen.
These apps work by intercepting trackpad input and translating it to the action you define. They are generally safe to use, but they can conflict with system gestures if you don’t configure them carefully. If you install one and a built-in gesture stops working, check the app’s settings to see if it has overridden that gesture.
Frequently Asked Questions
How do I right-click on a Mac trackpad?
The default is to click with two fingers. If that doesn’t work, go to System Settings → Trackpad → Point & Click and select “Secondary click” and choose “Click with two fingers.” You can also set the bottom-right or bottom-left corner as a right-click zone.
Why is my scroll direction “natural” and how do I change it?
Natural scrolling means swiping up moves content up, like on a phone. To reverse it, go to System Settings → Trackpad → Scroll & Zoom and uncheck “Natural scrolling.” This makes swiping up move the page down, which is the traditional mouse behavior.
Can I use Mac trackpad gestures on a Windows PC?
Not directly. Windows has its own set of trackpad gestures, and they are different. If you connect a Magic Trackpad to a Windows PC, it will work as a basic mouse, but the multi-finger gestures won’t function without third-party drivers that emulate Mac gestures.
Why does my three-finger swipe not work?
First, make sure it’s enabled in System Settings → Trackpad → More Gestures. If it is, check if you have an app that uses three-finger drag (like a window manager). Also, some older Macs require you to use three fingers plus a click for dragging, which can interfere. Try disabling “Look up & data detectors” if you have it set to three-finger tap.
Does the Magic Trackpad work with a MacBook?
Yes, you can connect a Magic Trackpad to a MacBook via Bluetooth. It works alongside the built-in trackpad, and both can be used simultaneously. All gestures work on the external trackpad as well.
How do I reset all trackpad gestures to default?
There is no one-click reset button in current macOS. You have to manually go through each tab in System Settings → Trackpad and re-enable the gestures you want. Alternatively, you can delete the trackpad preference file (com.apple.AppleMultitouchTrackpad.plist) in ~/Library/Preferences, but that’s a more advanced step and may not be necessary.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Data Center Security: Encryption, Backups, Access
- Best Mini PCs for Gaming: Top Picks
- Phone Buttons: Clever Ways to Use Them
- Resonance Solstice Codes: What They Are
- Blue Protocol Star Resonance: Best Graphics Settings for Smooth FPS
- Jack Daniel’s Ransomware: Data Stolen?