keepcalculator

06 Numbers and Powers

Mojave Valley Codes: What They Are & How to Use

Card No. 06·76997 · Updated · Standard formula, shown below

Mojave Valley codes are the standardized building and zoning regulations that govern construction, land use, and property development in Mojave Valley, Arizona. If you’re planning to build, remodel, or change the use of a property there, these codes dictate everything from setback distances and building heights to permitted uses and parking requirements. This article breaks down what those codes cover, how to find the ones that apply to your project, and how to navigate the approval process.

Background: What Are Mojave Valley Codes?

Mojave Valley, Arizona, is an unincorporated community in Mohave County, located along the Colorado River across from Laughlin, Nevada. Because it is unincorporated, it does not have its own city council or municipal zoning ordinance. Instead, land use and building regulations come from two main sources: the Mohave County Zoning Ordinance and the Mohave County Building Codes, which adopt the International Building Code (IBC), International Residential Code (IRC), and related international codes. These county-level codes are often referred to collectively as “Mojave Valley codes” by local residents, contractors, and real estate professionals.

The county’s zoning ordinance divides land into districts (e.g., residential, commercial, industrial, agricultural) and sets rules for what can be built where. The building codes set minimum standards for structural safety, electrical, plumbing, and mechanical systems. Together, they form the legal framework for any development in the Mojave Valley area.

How the Codes Are Organized

Mohave County’s regulations are published in two main documents:

  • Mohave County Zoning Ordinance – This document is divided into articles covering zoning districts, use classifications, development standards (setbacks, height, lot coverage), parking, signage, and the review process. It’s the first place to check for what you can do on a property.
  • Mohave County Building Codes – This includes the adopted editions of the IBC, IRC, International Plumbing Code, International Mechanical Code, International Electrical Code, and International Energy Conservation Code. These set the technical standards for construction.

Both documents are available on the Mohave County website, and the building codes can also be accessed through the International Code Council (ICC) website. The county also publishes a fee schedule and a list of required permits.

Key Zoning Requirements to Know

When you look up your property’s zoning, you’ll find specific numbers that affect your project. Common ones include:

  • Minimum lot size – In residential zones, this is often 7,500 to 20,000 square feet, but can be larger for rural residential or agricultural zones.
  • Setbacks – Front, side, and rear setbacks typically range from 10 to 30 feet depending on the zone and the type of structure.
  • Maximum building height – Usually 30 to 35 feet for residential, but may be higher for agricultural structures.
  • Lot coverage – The percentage of the lot that can be covered by impervious surfaces (building footprint, driveways, patios). Often 30–50%.
  • Parking requirements – For residential, typically 2 spaces per dwelling unit; for commercial, based on square footage or number of seats.

These numbers are not universal—they vary by zoning district. Always confirm the exact requirements for your specific parcel by checking the zoning map and ordinance.

How to Find the Codes That Apply to Your Property

Follow these steps to determine which codes apply to your project:

  1. Find your zoning designation – Use the Mohave County interactive zoning map (available on the county’s GIS portal) or contact the Planning and Zoning Department with your parcel number or address.
  2. Look up the zoning district – Once you know your zone (e.g., R1-10, C-2, M-1), go to the Zoning Ordinance’s district tables to see permitted uses and development standards.
  3. Check the building code edition – Verify which edition of the IBC/IRC the county has adopted (e.g., 2018 or 2021) because that affects specific technical requirements.
  4. Consult the permit checklist – The county’s Building Safety department provides checklists for residential and commercial permits, listing required documents like site plans, structural calculations, and energy compliance forms.

If you’re unsure, the Planning and Zoning staff can answer questions over the phone or in person. They are the authoritative source for interpretations.

Common Problems and How to Avoid Them

People often run into these issues when dealing with Mojave Valley codes:

  • Building without a permit – This can lead to fines, stop-work orders, and difficulty selling the property later. Always pull a permit before starting work.
  • Setback violations – Placing a shed or addition too close to a property line is a frequent mistake. Measure from the property line, not the fence.
  • Misclassifying a structure – A “shed” that is 200 square feet with electricity may require a building permit and meet setback rules, unlike a small storage building.
  • Ignoring floodplain regulations – Parts of Mojave Valley are in the Colorado River floodplain. If your property is in a flood zone, you may need a floodplain development permit and elevated construction.
  • Not checking HOA covenants – If your property is in a planned development with a homeowners association, HOA rules may be stricter than county codes. You must comply with both.

To avoid these, do your research early, talk to county staff, and hire a local contractor or architect who knows the area’s requirements.

Costs and Timelines for Permits

Permit fees in Mohave County are based on the valuation of the work. For a typical single-family home, building permit fees can range from $1,500 to $4,000, plus plan review fees. Smaller projects like a patio cover or a shed may cost $100–$500. The county’s fee schedule is published online and updated regularly.

Processing times vary: over-the-counter permits for minor work (like a water heater replacement) can be issued same-day, while new home permits may take 2–6 weeks for plan review and approval. The review process includes checking for zoning compliance, structural integrity, and energy code compliance. You can expedite by submitting complete, accurate plans.

Safety and Compliance Essentials

Beyond zoning, the building codes are there to keep you safe. Key points:

  • Structural – In this desert region, wind loads and seismic forces are considered. Roofs must be tied down, and foundations must be designed for the soil conditions.
  • Electrical – All electrical work must be performed by a licensed electrician and inspected. Common violations include undersized panels and improper grounding.
  • Plumbing – Backflow prevention and proper venting are required. Septic systems must be approved by the county’s Environmental Health department.
  • Energy – New homes must meet the state energy code, which includes insulation, window, and HVAC efficiency standards.

Inspections are required at key stages: footing, foundation, rough-in (electrical/plumbing), insulation, and final. You must call for inspections before covering up work.

Alternatives and Special Cases

If the standard process doesn’t fit your project, there are alternatives:

  • Conditional Use Permit (CUP) – For uses not allowed by right (e.g., a home business with customers), you can apply for a CUP, which involves a public hearing.
  • Variance – If a setback or height requirement creates a hardship, you can request a variance from the Board of Adjustment.
  • Agricultural exemptions – Some agricultural structures (like pole barns) may be exempt from building permits if they meet certain size and use criteria, but they still must meet zoning setbacks.
  • Manufactured homes – These are regulated separately under the county’s manufactured home ordinance, which has its own placement and foundation requirements.

These processes take longer and require additional fees, but they can make a project feasible when the standard rules don’t work.

Frequently Asked Questions

Do I need a permit for a fence in Mojave Valley?

Generally, no building permit is required for a fence under 6 feet high in residential zones, but you must still comply with zoning setbacks and height limits. Check with the Planning Department, as corner lots may have visibility restrictions.

Can I build a tiny house on wheels in Mojave Valley?

Tiny houses on wheels are typically classified as recreational vehicles, not permanent dwellings. They cannot be used as a primary residence unless placed in an RV park or on a property that allows RV occupancy. For a permanent tiny house, it must meet the IRC and be on a permanent foundation.

How do I find out the zoning of my property?

Use the Mohave County GIS map online, or call the Planning and Zoning Department with your parcel number. You can also visit their office in Kingman or Lake Havasu City.

What is the minimum lot size for a house in Mojave Valley?

It depends on the zone. Many residential zones require at least 7,500 square feet, but some rural residential zones require 1 acre or more. Check the zoning ordinance for the specific district.

Can I run a business from my home in Mojave Valley?

Home occupations are allowed in most residential zones with conditions: the business must be clearly incidental to the residential use, no employees outside the household, no customers visiting, and no signage. Some businesses require a Conditional Use Permit.

What inspections are required for a new home?

Inspections are needed for footing, foundation, plumbing rough-in, electrical rough-in, insulation, and final. The county’s Building Safety department will provide a list when you pull the permit. You must call for each inspection before proceeding.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →