keepcalculator

06 Numbers and Powers

Mortal Shell 2 Feed Me Trophy: How to Unlock

Card No. 06·48863 · Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered
You enter
Finish time, Distance
You get
Average pace, Average speed
Rounding
2 dp

To unlock the “Feed Me” trophy in Mortal Shell 2, you must feed the Gluttonous Gland to the giant creature in the Sunken City during the main quest. This is a required story action, so you cannot miss it if you follow the critical path — but if you’re aiming for the trophy on a specific playthrough, here’s exactly when and where it happens.

Formula

The calculator above works out your average pace and speed for a run, ride, or walk. You enter the total time and the distance covered; it returns your pace in minutes per kilometer and your speed in kilometers per hour. The formulas are:

  • Pace = total time (minutes) ÷ distance (km)
  • Speed = distance (km) ÷ (total time ÷ 60)

Where t is time in minutes, d is distance in kilometers, pace is in min/km, and speed is in km/h. If you use miles, convert distance to km first (1 mile = 1.60934 km) or divide the pace by 1.60934 to get min/mile.

Worked Example

Using the default values: 50 minutes and 10 km.

  1. Pace = 50 ÷ 10 = 5.00 min/km
  2. Speed = 10 ÷ (50 ÷ 60) = 10 ÷ 0.8333 = 12.00 km/h

So with 50 minutes for 10 km, your average pace is 5 minutes per kilometer and your average speed is 12 km/h. The calculator shows 5.00 and 12.00 with two decimals.

When to Use This Calculator

Use this tool for any activity where you track time and distance: running, cycling, hiking, rowing, or walking. It’s especially handy for training zones — for example, if you want to hold a 5:30 min/km pace for a half marathon, you can enter the distance (21.1 km) and see what total time you need. It also works in reverse: enter a target time and distance to see what pace you must sustain.

How to Read the Result

The pace is the amount of time it takes you to cover one kilometer. Lower pace numbers mean faster. Speed is how many kilometers you cover in one hour. These two are reciprocals — if your pace improves (drops), your speed rises. For most runners, pace is the more intuitive metric; for cyclists, speed often matters more. The calculator gives both so you can switch without re-entering data.

Common Mistakes

  • Mixing minutes and hours: Enter time in minutes only. If you ran 1:30:00, enter 90, not 1.5.
  • Using miles without converting: The default unit is kilometers. If your distance is in miles, multiply by 1.60934 before entering, or you’ll get a misleadingly fast pace.
  • Rounding too early: The calculator rounds to two decimals, but if you round intermediate steps manually, you may get slightly different results. Let the calculator handle it.
  • Ignoring rest stops: The time you enter should be moving time, not elapsed time, if you want your true running pace. Including a 5-minute water break will make your pace look slower than it actually was.

Limitations of the Formula

This is a simple average — it assumes you moved at a constant speed. In reality, terrain, wind, and fatigue cause your pace to vary. The average pace is still useful for planning and comparing workouts, but it doesn’t tell you about your splits or heart rate. For hilly routes, your average pace may look worse than your flat-ground fitness suggests. Also, the formula works for any distance, but for very short efforts (under 200 meters) the speed figure becomes less meaningful because acceleration and deceleration dominate.

Frequently Asked Questions

How do I convert my pace from min/km to min/mile?

Multiply the pace in min/km by 1.60934. For example, 5:00 min/km becomes 8:03 min/mile. Alternatively, enter your distance in miles (converted to km) into the calculator and read the pace — it will still be in min/km, so you’d need to convert manually.

What is a good average pace for a beginner runner?

There is no single “good” pace — it depends on age, fitness, and experience. A common benchmark for a recreational runner is 6 to 7 min/km (about 10-11 min/mile). If you’re just starting, focus on maintaining a conversation pace rather than hitting a specific number.

Can I use this calculator for walking?

Yes. Walking pace is typically 12-20 min/km (20-32 min/mile). The formula is the same; just enter your walking time and distance. It’s useful for estimating how long a hike or a commute on foot will take.

Why does the calculator show speed in km/h but I use miles per hour?

You can convert the speed by dividing by 1.60934. For instance, 12 km/h is about 7.5 mph. Or you can enter distance in miles (converted to km) and then divide the resulting speed by 1.60934 to get mph.

What if I only know my pace and want to find total time?

Enter the distance and a guess for time, then adjust the time until the pace matches your target. For example, to run 10 km at 5:30 min/km, try 55 minutes — the calculator will show 5.50 min/km.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0 | 100000
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →