Oppo 40W Wireless Charger: Specs, Speed & Compatibility

The Oppo 40W wireless charger is a proprietary fast-charging accessory that delivers up to 40 watts of power to compatible Oppo and OnePlus phones, fully charging a 4,500 mAh battery in roughly 56 minutes. It uses Oppo’s AirVOOC technology, which requires a matching phone and a dedicated 65W or higher power adapter to reach full speed. This article explains how it works, what you need to use it, and how it compares to other wireless chargers.

What Is AirVOOC and How Does It Differ from Qi?

AirVOOC is Oppo’s proprietary wireless charging standard, first introduced in 2020. Unlike the universal Qi standard (which typically tops out at 15W for phones), AirVOOC uses a custom voltage and communication protocol to achieve much higher power transfer. The 40W version is a middle tier—below the 50W and 65W AirVOOC chargers but still far faster than standard Qi.

Key differences from Qi:

• Voltage: AirVOOC uses higher voltage (20V) compared to typical Qi (5V–12V).
• Communication: The charger and phone exchange data to negotiate power levels, ensuring safe charging.
• Compatibility: Only Oppo and OnePlus phones with AirVOOC support can achieve 40W; other Qi devices will charge at standard Qi speeds (usually 5W–15W).

How the 40W Wireless Charger Works

The charger itself is a circular pad with a built-in cooling fan. When you place a compatible phone on it, the charger and phone communicate to determine the maximum safe power level. The charger then converts AC power from the wall adapter into a high-frequency alternating current in its coil, which induces a current in the phone’s receiving coil. The phone’s internal circuitry converts that back to DC to charge the battery.

The 40W figure is the peak input power to the phone’s coil, not the output at the battery. Some energy is lost as heat during conversion, so the actual charging speed you see is slightly lower. The included cooling fan helps dissipate heat, which is crucial for maintaining high speeds without overheating.

What You Need to Get 40W Speed

To actually achieve 40W wireless charging, you need three things:

1. A compatible phone: Models like the Oppo Find X3 Pro, OnePlus 9 Pro, and later flagships support AirVOOC 40W or higher. Check your phone’s specs—if it only supports 15W Qi, it won’t charge faster.
2. The Oppo 40W AirVOOC wireless charger: This specific model, often sold as the “Oppo 40W AirVOOC Wireless Charger” or bundled with certain phones.
3. A 65W or higher Oppo/OnePlus power adapter: The charger does not include a wall plug. It requires a USB-C PD adapter that supports SuperVOOC. Using a standard 18W charger will result in slower charging (around 10W–15W).

If any of these is missing, you won’t get 40W. The charger will still work, but at reduced speeds.

Charging Speed and Real-World Performance

Oppo claims the 40W charger can fill a 4,500 mAh battery (typical for flagships) from 0% to 100% in about 56 minutes. In practice, charging speed tapers off as the battery fills to protect it. The first 50% charges very quickly (often under 20 minutes), then slows down.

Compared to wired SuperVOOC (65W), wireless 40W is slightly slower—wired can do 0–100% in about 35–40 minutes. But for a wireless charger, 40W is among the fastest available. It’s significantly faster than standard 15W Qi charging, which typically takes over 2 hours for the same battery.

Compatibility with Other Devices

While the Oppo 40W charger is designed for AirVOOC, it also works with other devices via Qi:

• iPhone: Supports Qi up to 7.5W (iPhone 12 and later). It will charge, but at a slower speed than Apple’s MagSafe.
• Samsung Galaxy: Supports Qi up to 15W (with compatible models). Again, slower than AirVOOC.
• Earbuds: Many TWS earbuds with Qi charging cases will work.
• Other Android phones: Most will charge at 5W–10W depending on their Qi implementation.

However, the charger’s coil is positioned for phones with a centered receiving coil. If your phone has an off-center coil (like some older models), you may need to adjust placement to get a charging indicator.

Common Problems and Troubleshooting

Users report a few common issues with the Oppo 40W charger:

• Slow charging: Often due to using a low-power adapter or a non-compatible phone. Ensure you’re using a 65W SuperVOOC adapter and a compatible phone.
• Overheating: The charger has a fan, but if it’s blocked or the ambient temperature is high, charging speed may drop. Keep it in a well-ventilated area.
• Alignment issues: The phone must be centered on the pad. If the charging indicator doesn’t appear, reposition the phone.
• Fan noise: The cooling fan is audible, especially at full speed. Some find it distracting in quiet rooms.

If the charger stops working, check the cable and adapter first. The USB-C cable must support SuperVOOC—using a cheap cable can prevent fast charging.

Safety and Heat Management

Wireless charging generates more heat than wired charging, and heat can degrade battery life. The Oppo 40W charger includes a fan and uses a “smart” cooling system that adjusts fan speed based on temperature. The phone also has its own thermal management—if it gets too hot, it will reduce charging speed.

To ensure safety:

• Use only the original cable and a SuperVOOC adapter.
• Avoid placing the charger on soft surfaces like beds or sofas that block airflow.
• Don’t cover the phone with thick cases that trap heat.

Oppo’s charging system has multiple safety protections (over-voltage, over-current, over-temperature), so the risk is low. However, using a third-party adapter may not support the required protocol and could cause slower charging or, in rare cases, damage.

Cost and Value Compared to Alternatives

At launch, the Oppo 40W wireless charger retailed for around $40–$50, though prices vary. That’s more expensive than standard 15W Qi chargers (often $15–$25) but cheaper than some 50W or 65W AirVOOC models. Given that it can charge a flagship phone in under an hour, it offers good value for Oppo/OnePlus users.

However, if you don’t own a compatible phone, the premium price isn’t justified—you’d get the same speed from a cheaper Qi charger. Also, note that you must buy the 65W adapter separately if you don’t already have one, adding to the total cost.

Frequently Asked Questions

Can I use the Oppo 40W charger with a OnePlus phone? Yes, most OnePlus flagships (like the OnePlus 9 Pro and 10 Pro) support AirVOOC and will charge at 40W or higher. Older OnePlus models may only support 15W Qi.

Does the charger come with a power adapter? No, it only includes the charging pad and a USB-C cable. You need a 65W SuperVOOC adapter (sold separately) to achieve 40W speed.

Will it charge my iPhone fast? No, iPhones are limited to 7.5W via Qi, so it will take about 2–3 hours for a full charge. It’s not a good choice for iPhone users.

Is the fan loud? The fan is audible but not overly loud. It runs at higher speed during fast charging and quiets down as the charge completes. Some users find it noticeable in a quiet bedroom.

Can I use a 45W adapter instead of 65W? It may work, but the charger will likely draw less power, resulting in slower charging. To get the full 40W, you need a 65W SuperVOOC adapter.

Does the charger work with a case? Yes, but thick cases (over 3mm) may interfere with charging. It’s best to use a slim case or remove it for fastest speeds.

Related

• TTP223 Capacitive Touch Sensor: How It Works
• Phishing-Resistant MFA Setup Guide
• Folder Shortcuts to Start Menu: Easy Setup