Ping from a Mac using the built-in Terminal app: open Terminal and type ping hostname (for example, ping google.com), then press Return. The command sends ICMP echo requests to the target and displays response times, packet loss, and summary statistics until you stop it with Control+C. This guide explains the command’s options, how to interpret the output, and how to fix common problems.
What the ping command does
Ping is a network diagnostic tool that sends small packets (ICMP Echo Requests) to a target IP address or hostname and waits for a reply (ICMP Echo Reply). It measures the round-trip time (RTT) in milliseconds, reports whether any packets are lost, and gives you a quick read on whether a host is reachable and how responsive it is. On macOS, ping runs in the Terminal and keeps sending packets indefinitely unless you tell it to stop.
How to open Terminal and run ping
- Open Terminal: go to Applications > Utilities > Terminal, or press Command+Space, type “Terminal,” and press Return.
- Type
ping google.comand press Return. - To stop it, press Control+C. You’ll see a summary with packets transmitted, received, lost, and min/avg/max times.
You can also ping an IP address directly, like ping 8.8.8.8, which avoids DNS resolution if you suspect a DNS problem.
Useful ping options on macOS
-c count– send a specific number of pings, then stop (e.g.,ping -c 4 google.com).-i seconds– set the interval between pings (default is 1 second). Use-i 0.2for a faster test, but note that superuser privileges may be required for intervals under 0.2 seconds.-t ttl– set the Time To Live value, which limits how many network hops the packet can cross.-s size– set the packet size in bytes (default is 56 bytes, plus 8 bytes of ICMP header).-W timeout– set the time in seconds to wait for a reply (default is 5 seconds on macOS).-q– quiet mode; only shows the summary, not each reply.
Interpreting ping output
Each line shows the target’s IP address, the ICMP sequence number, the TTL, and the round-trip time in milliseconds. For example:
64 bytes from 142.250.190.46: icmp_seq=0 ttl=115 time=12.3 ms
Key fields:
- icmp_seq – sequence number; gaps indicate lost packets.
- ttl – remaining time-to-live; a low value suggests many hops or a misconfigured network.
- time – round-trip time in milliseconds; lower is better.
After you stop with Control+C, you get a summary:
--- google.com ping statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss time 4015ms rtt min/avg/max/stddev = 11.8/12.3/13.1/0.4 ms
Look at packet loss percentage and average RTT. 0% loss and low average (under 50 ms for local networks, under 150 ms for most internet) is healthy. High loss or timeouts indicate a connectivity problem.
Common problems and fixes
- “Request timeout” – the host didn’t reply. Check your internet connection, try a different host, or check if the host blocks ICMP (some servers do).
- “Cannot resolve google.com” – DNS issue. Try pinging an IP address like 8.8.8.8; if that works, your DNS is the problem.
- “Operation not permitted” – on newer macOS versions, the Terminal may need network access permission. Go to System Settings > Privacy & Security > Local Network and enable Terminal.
- High or inconsistent RTT – could be network congestion, Wi-Fi interference, or a distant server. Test with
ping -c 10to get a better average. - Ping stops with “sendto: No route to host” – your Mac can’t find a route to the target; check your router or VPN settings.
Ping vs. other network tools
Ping only tells you if a host is reachable and how fast it responds. For deeper diagnostics:
- traceroute – shows the path packets take and where delays or losses occur.
- nslookup/dig – check DNS resolution.
- netstat – view active connections and listening ports.
- pathping (Windows only) – combines ping and traceroute; on Mac use
tracerouteormtr(install via Homebrew).
Frequently Asked Questions
How do I make ping stop automatically after a few pings?
Use the -c option: ping -c 5 google.com sends exactly 5 pings and then stops. This is the most common way to run a quick test without pressing Control+C.
Why does ping keep running forever?
By default, macOS ping runs indefinitely. It’s designed that way for continuous monitoring. Press Control+C to stop it and see the summary. If you want a one-shot test, always use -c.
What is a good ping time?
For local network devices, under 10 ms is typical. For internet servers, under 50 ms is excellent, under 100 ms is fine for most uses, and above 150 ms can cause noticeable lag in real-time applications. But ping times vary by distance and network load.
Can I ping a port?
No, ping uses ICMP and doesn’t check TCP or UDP ports. To test a specific port, use nc -vz host port (netcat) or telnet host port. For example, nc -vz google.com 80 checks if port 80 is open.
Why does ping show “icmp_seq=0” every time?
If you’re using the -c option, each new invocation starts the sequence at 0. If you’re running ping continuously, the sequence increments each second. If it stays at 0 while packets are sent, check the output for errors or a firewall blocking replies.
Does ping work over Wi-Fi and Ethernet the same way?
Yes, the command is the same, but results differ. Wi-Fi typically has higher and more variable latency than wired Ethernet due to interference and shared bandwidth. If you see high ping on Wi-Fi, try Ethernet to isolate the issue.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More cards in this drawer
- Samsung Unpacked August 5: 5 Devices Teased?
- Google Workspace Accounts Created Bypassing?
- Recover Deleted Screenshots on Mac: Full Guide
- Go vs Node.js: Cloudflare API Request Data
- ROG Phone 3 Certified Specs Leak: What’s Confirmed
- Clear Cache on a Philips Smart TV: Right Menu