keepcalculator

06 Numbers and Powers

Pokeball Plus Failed to Connect? Fix It Now

Card No. 06·81270 · Updated · Standard formula, shown below

If your Pokeball Plus is failing to connect to your Nintendo Switch or phone, the fix is usually a reset or a charging issue. Follow the steps below to get it working again, starting with the most common solutions.

Why Your Pokeball Plus Won’t Connect

The Pokeball Plus connects to the Nintendo Switch via Bluetooth and to a smartphone via the Pokémon GO app. Connection failures typically stem from one of three issues: the controller is not paired, the battery is dead, or the device’s Bluetooth cache is corrupted. Less commonly, the internal antenna or button mechanism may be faulty, but this is rare and usually only after a drop or water exposure.

Step-by-Step: Reconnect to Nintendo Switch

  1. Check the battery: Plug the Pokeball Plus into a USB charger (any standard USB-A port) for at least 30 minutes. The LED ring should light up while charging. If it doesn’t, try a different cable or charger.
  2. Reset the controller: Press and hold the top button (the small button near the joystick) for 5 seconds until the LED flashes blue. This puts it in pairing mode.
  3. On the Switch: Go to System Settings > Controllers and Sensors > Disconnect Controllers. This clears old pairings.
  4. Pair again: From the Switch home menu, go to Controllers > Change Grip/Order. Hold the top button on the Pokeball Plus until the LED blinks, then press L + R on the Pokeball Plus when prompted.
  5. If it still fails: Fully power down the Switch (hold the power button for 3 seconds, then select Power Options > Turn Off). Turn it back on and repeat steps 3-4.

Step-by-Step: Reconnect to Pokémon GO (Smartphone)

For Pokémon GO on iOS or Android, the process is slightly different because the game handles the Bluetooth pairing directly.

  1. Open Pokémon GO and go to Settings > Pokeball Plus.
  2. Tap the Pokeball Plus icon on the screen. The game will search for nearby devices.
  3. Press the top button on the Pokeball Plus to make it discoverable.
  4. If it doesn’t appear, go to your phone’s Bluetooth settings, forget any existing “Pokeball Plus” pairing, and try again.
  5. If the game says “Unable to connect,” close the app completely (swipe it away), then reopen and try again.

Common Problems and Their Fixes

  • LED not lighting up at all: The battery is completely drained or the charging port is dirty. Clean the port with a dry toothpick and charge for at least 1 hour.
  • LED blinks red: Battery is critically low. Charge it.
  • Connects but disconnects after a few seconds: This is often a Bluetooth interference issue. Move closer to the Switch or phone, and turn off other Bluetooth devices nearby.
  • Switch says “Controller not registered”: The controller is paired to another device. Reset it by holding the top button for 5 seconds, then re-pair.
  • Phone connects but the game doesn’t: The game’s Bluetooth permissions may be off. On Android, go to Settings > Apps > Pokémon GO > Permissions and enable Location and Nearby devices. On iOS, ensure Bluetooth is on in the phone’s settings.

How to Reset the Pokeball Plus Completely

If none of the above works, a full reset can clear any internal glitches. This does not erase your game data—it only clears the controller’s memory.

  1. Press and hold the top button and the joystick (the control stick) simultaneously for 10 seconds.
  2. Release both buttons. The LED will flash red and then blue.
  3. Wait 5 seconds, then try pairing again as described above.

When to Consider a Replacement

If you’ve tried all the steps above and the Pokeball Plus still won’t connect or hold a charge, the internal battery or Bluetooth chip may be damaged. This can happen after a hard drop, exposure to water, or normal wear over years. Replacement Pokeball Pluses are available from Nintendo and major retailers. Before buying, double-check that your Switch or phone’s operating system is up to date—sometimes a system update fixes compatibility issues.

Frequently Asked Questions

Why does my Pokeball Plus keep disconnecting from Pokémon GO?

This is usually due to Bluetooth interference or the game’s background refresh. Close other Bluetooth apps, keep your phone within 10 feet of the Pokeball Plus, and make sure Pokémon GO is allowed to run in the background.

Can I connect two Pokeball Pluses to one Switch?

No, the Switch only supports one Pokeball Plus at a time. If you have two, you must disconnect one before pairing the other.

Does the Pokeball Plus work with Pokémon Sword and Shield?

Yes, it works as a controller for those games, but it does not have the auto-spin feature that it has in Pokémon: Let’s Go. In Sword and Shield, it functions as a standard controller.

How long does the battery last?

Fully charged, the Pokeball Plus lasts about 3 hours of continuous play. In standby mode (not connected), it can last several days.

Is there a way to fix a Pokeball Plus that won’t charge at all?

Try a different USB cable and charger. If it still won’t charge, the battery may be dead. Some users have successfully replaced the battery, but this requires soldering and is not officially supported. If under warranty, contact Nintendo for a repair.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More cards in this drawer

The whole Numbers and Powers drawer →